[Thu Mar 22 08:42:24 2012] Detection parameters:
  Position = (367.7, 178.6) = 21 42 48.10 6 44 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.2 +/- 7.4
  Background counts = 3.8
  Rate = 0.004 +/- 0.0009

[Thu Mar 22 08:42:24 2012] Off-axis axis estimate = 10.03'
[Thu Mar 22 08:47:15 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 08:47:15 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Thu Mar 22 08:47:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.071
[Thu Mar 22 08:47:15 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.44"
[Thu Mar 22 09:05:58 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_src8.ximg exists
[Thu Mar 22 09:05:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_src8.csv
[Thu Mar 22 09:05:58 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Mar 22 09:05:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_src8.csv
[Thu Mar 22 09:05:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:05:58 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Mar 22 09:05:58 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Mar 22 09:05:58 2012] Fit fullrun_mos1_xmm0502041001_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Mar 22 09:26:47 2012] Spatial fit model total counts = 53.309500, observed total counts = 49.000000
[Thu Mar 22 09:26:47 2012] Offset between fit and detection position for source 6 = 0.036340 pixels
[Thu Mar 22 09:26:47 2012] 53.493800 total counts/ 24.461900 bgd. counts: snr = 5.869895
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.036340 pixels
  Position = (367.6, 178.6) = 21 42 48.11 6 44 26.1
  Extent = 6.6 (4.6-8.5)", rotation angle = 0
  Source counts = 29.0 +/- 7.3
  Background counts = 24.5
  Rate = 0.003 +/- 0.0008
[Thu Mar 22 09:26:47 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 09:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 09:26:47 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 09:26:47 2012] Source does appear to be extended
[Thu Mar 22 09:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 09:28:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 09:28:23 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Thu Mar 22 09:28:23 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.988
[Thu Mar 22 09:28:23 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 6.58"
[Thu Mar 22 09:42:24 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_src8.ximg exists
[Thu Mar 22 09:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_src8.csv
[Thu Mar 22 09:42:24 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Mar 22 09:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_src8.csv
[Thu Mar 22 09:42:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 09:42:24 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Mar 22 09:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Mar 22 09:42:24 2012] fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Mar 22 09:42:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Mar 22 09:42:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502041001_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 10:03:24 2012] Warning, spatial fit 8 centroid is now closest to src. 9
[Thu Mar 22 10:03:24 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 10:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 10:03:24 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 10:03:24 2012] Source does appear to be extended
[Thu Mar 22 10:03:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 10:11:25 2012] XMMSAS src. selection expression = ellipse(31936.224000, 15491.777000, 394.669211, 394.669211, 0.000000, X, Y)
[Thu Mar 22 10:11:25 2012] Writing source region out to fullrun_mos1_xmm0502041001_pi300-10000_pass1_cl_src6_src.reg
[Thu Mar 22 10:11:25 2012] Extracting stamp from image fullrun_mos1_xmm0502041001_pi300-10000_cl_sm2.00.img.gz, (345, 156) - (390, 201)
[Thu Mar 22 10:11:25 2012] XMMSAS bgd. selection expression = annulus(31936.224000, 15491.777000, 657.782019, 1315.564038, X, Y)
[Thu Mar 22 10:11:25 2012] Writing fullrun_mos1_xmm0502041001_pi300-10000_pass1_cl_src6.gif
[Thu Mar 22 10:16:06 2012] Mean detx,y = (-10112.00, 6948.38) 
[Thu Mar 22 10:16:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 10:16:31 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 10:16:32 2012] Setting source spectrum file to fullrun_mos1_xmm0502041001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 22 10:16:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502041001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Mar 22 10:27:28 2012] Not generating rmf since there are only 29 counts
[Thu Mar 22 10:27:28 2012] rmf not generated due to insufficient counts
[Thu Mar 22 10:44:13 2012] Updating aperture counts using extracted products
[Thu Mar 22 10:44:13 2012] Error reading totcts from fullrun_mos1_xmm0502041001_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 22 10:44:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 10:44:13 2012] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0502041001_pi300-10000_pass1_cl_src6.arf
[Thu Mar 22 10:44:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 10:44:13 2012] Updating source flux to 6.4e-14
[Thu Mar 22 10:44:15 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting