[Tue Dec 20 10:12:31 2011] Detection parameters:
  Position = (364.1, 173.2) = 21 42 37.98 6 45 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.8 +/- 10.7
  Background counts = 3.1
  Rate = 0.009 +/- 0.001

[Tue Dec 20 10:12:31 2011] Off-axis axis estimate = 10.25'
[Tue Dec 20 10:35:13 2011] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 10:35:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 10:35:13 2011] Initial guess for spatial extent in simple fitting = 11.55"
[Tue Dec 20 10:35:13 2011] source mask rpix=2.7, npix_max = 39, mask sum = 34, frac = 0.853
[Tue Dec 20 10:35:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.55"
[Tue Dec 20 11:02:45 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_src2.ximg exists
[Tue Dec 20 11:02:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_src2.csv
[Tue Dec 20 11:02:45 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Dec 20 11:02:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_src2.csv
[Tue Dec 20 11:02:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 11:02:45 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Dec 20 11:02:45 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Dec 20 11:02:45 2011] Fit fullrun_mos2_xmm0502040901_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Dec 20 11:02:54 2011] Spatial fit model total counts = 80.096800, observed total counts = 80.000000
[Tue Dec 20 11:02:54 2011] Offset between fit and detection position for source 10 = 0.247398 pixels
[Tue Dec 20 11:02:54 2011] 79.419500 total counts/ 32.646500 bgd. counts: snr = 8.186097
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.247398 pixels
  Position = (364.3, 173.2) = 21 42 37.91 6 46 0.7
  Extent = 4.7 (3.7-5.8)", rotation angle = 0
  Source counts = 46.8 +/- 8.9
  Background counts = 32.6
  Rate = 0.006 +/- 0.001
[Tue Dec 20 11:02:54 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:02:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:02:54 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 11:02:54 2011] Source does appear to be extended
[Tue Dec 20 11:02:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:16:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 11:16:17 2011] Initial guess for spatial extent in simple fitting = 4.75"
[Tue Dec 20 11:16:17 2011] source mask rpix=1.1, npix_max = 10, mask sum = 8, frac = 0.790
[Tue Dec 20 11:16:17 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 4.75"
[Tue Dec 20 11:38:16 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_src2.ximg exists
[Tue Dec 20 11:38:16 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_src2.csv
[Tue Dec 20 11:38:16 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Dec 20 11:38:16 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_src2.csv
[Tue Dec 20 11:38:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 11:38:16 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Dec 20 11:38:16 2011] fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Dec 20 11:38:16 2011] Fit fullrun_mos2_xmm0502040901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Dec 20 11:38:23 2011] Warning, spatial fit 2 centroid is now closest to src. 9
[Tue Dec 20 11:38:23 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:38:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:38:23 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 11:38:23 2011] Source does appear to be extended
[Tue Dec 20 11:38:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:55:47 2011] XMMSAS src. selection expression = ellipse(31647.167600, 15018.089000, 284.808331, 284.808331, 0.000000, X, Y)
[Tue Dec 20 11:55:47 2011] Writing source region out to fullrun_mos2_xmm0502040901_pi300-10000_pass1_cl_src10_src.reg
[Tue Dec 20 11:55:47 2011] Extracting stamp from image fullrun_mos2_xmm0502040901_pi300-10000_cl_sm2.00.img.gz, (348, 157) - (381, 190)
[Tue Dec 20 11:55:48 2011] XMMSAS bgd. selection expression = annulus(31647.167600, 15018.089000, 474.680551, 949.361102, X, Y)
[Tue Dec 20 11:55:48 2011] Writing fullrun_mos2_xmm0502040901_pi300-10000_pass1_cl_src10.gif
[Tue Dec 20 11:56:48 2011] Mean detx,y = (11363.94, 5307.43) 
[Tue Dec 20 11:56:51 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 11:57:05 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 11:57:07 2011] Setting source spectrum file to fullrun_mos2_xmm0502040901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 20 11:57:07 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502040901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Dec 20 12:05:38 2011] Not generating rmf since there are only 46 counts
[Tue Dec 20 12:05:38 2011] rmf not generated due to insufficient counts
[Tue Dec 20 12:06:17 2011] Updating aperture counts using extracted products
[Tue Dec 20 12:06:17 2011] Error reading totcts from fullrun_mos2_xmm0502040901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 20 12:06:18 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 12:06:18 2011] Using photon index=1.80, rate=0.00556, arf fullrun_mos2_xmm0502040901_pi300-10000_pass1_cl_src10.arf
[Tue Dec 20 12:06:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 12:06:18 2011] Updating source flux to 2.1e-13
[Tue Dec 20 12:06:39 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting