Detector | Exposure (Original/High-E Flare Cleaned/Low-E Cleaned) | Image binning | Plate scale ("/pixel) | Bgd. level (orig/High-E flare cleaned/cleaned, counts/sq. arcmin/s) | GTI file | Bgd. light curves | Roll angle | CCD counts | Extra info |
---|---|---|---|---|---|---|---|---|---|
mos1 | 13111 | 13111 | 13109 | 1.00 | 4.35 | 0.0028/0.0028/0.0028 | Yes | orig clean | ccd1:3808 ccd2:2914 ccd3:3082 ccd4:3415 ccd5:2606 ccd7:2567 |
filter=Thin1 date-obs=2007-05-17T20:57:42 object=RX J2143.0+0654 roll_angle=70.8357696533 |
|
mos2 | 13116 | 13116 | 13115 | 1.00 | 4.35 | 0.0028/0.0028/0.0028 | Yes | orig clean | ccd1:4166 ccd2:2602 ccd3:3007 ccd4:2649 ccd5:4450 ccd6:3074 ccd7:2560 |
filter=Thin1 date-obs=2007-05-17T20:57:45 object=RX J2143.0+0654 roll_angle=70.8357696533 |
|
pn | 12970 | 12970 | 12965 | 1.00 | 4.35 | 0.02/0.02/0.02 | Yes | orig clean | ccd4:18742 |
filter=Thin1 date-obs=2007-05-17T21:02:54 object=RX J2143.0+0654 timedel=0.00 roll_angle=70.8357696533 |
19 source(s) in memory Iteration: 2 Images: |mos1 |mos2 |pn |
|
|
Python version = 2.5.4 (r254:67916, Aug 14 2009, 18:07:15) [GCC 4.1.1 20070105 (Red Hat 4.1.1-52)]
Headas version = 6.11
XAssist version = 1.000
SAS version = xmmsas_20110223_1801-11.0.0
numpy version = 1.3.0
Pyfits version = 2.1.1
XAssist originally started on this data set at Fri Dec 16 21:04:36 2011
This data set was last accessed on Fri Dec 16 21:04:36 2011
Current user = xassist on x3.localdomain
Number of fields in memory = 1
Current field being processed = xmm0502040701
Position of field target = 21 43 3.30 6 54 17.0
Current telescope = xmm
Current detector = all
Processing mode = proc
Processing status = OK
Detection method = eboxdetect
Batch processing enabled
Place data, logs, etc. in field subdirectories
Image analysis will be over range of allowed energies
Will analyze each ccd separately
Log files: processing messages |error messages |all messages (very detailed) |source logs