[Fri Dec 16 21:14:50 2011] Detection parameters:
  Position = (279.4, 284.1) = 21 43 3.29 6 54 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4417.0 +/- 78.7
  Background counts = 9.2
  Rate = 0.4 +/- 0.006

[Fri Dec 16 21:14:50 2011] Off-axis axis estimate = 1.73'
[Fri Dec 16 21:28:54 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:28:54 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Dec 16 21:28:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Dec 16 21:28:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 16 21:41:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 16 21:41:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 21:41:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 21:41:32 2011] Fit fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 21:41:36 2011] Spatial fit model total counts = 3896.000000, observed total counts = 3896.000000
[Fri Dec 16 21:41:36 2011] Offset between fit and detection position for source 2 = 0.058214 pixels
[Fri Dec 16 21:41:36 2011] 3909.815000 total counts/ 813.785000 bgd. counts: snr = 108.530129
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.058214 pixels
  Position = (279.4, 284.1) = 21 43 3.29 6 54 16.9
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 3096.0 +/- 62.5
  Background counts = 813.8
  Rate = 0.2 +/- 0.005
[Fri Dec 16 21:41:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 21:41:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 21:41:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 21:41:36 2011] Source does appear to be extended
[Fri Dec 16 21:41:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 21:49:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:49:50 2011] Initial guess for spatial extent in simple fitting = 5.33"
[Fri Dec 16 21:49:50 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.007
[Fri Dec 16 21:49:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 16 21:57:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 16 21:57:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 21:57:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 16 21:57:52 2011] Fit fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 16 21:57:55 2011] Spatial fit model total counts = 3896.000000, observed total counts = 3896.000000
[Fri Dec 16 21:57:55 2011] Offset between fit and detection position for source 2 = 0.000095 pixels
[Fri Dec 16 21:57:55 2011] 3909.923000 total counts/ 817.703000 bgd. counts: snr = 108.136570
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000095 pixels
  Position = (279.4, 284.1) = 21 43 3.29 6 54 16.9
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 3092.2 +/- 62.5
  Background counts = 817.7
  Rate = 0.2 +/- 0.005
[Fri Dec 16 21:57:55 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 21:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 21:57:55 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 21:57:55 2011] Source does appear to be extended
[Fri Dec 16 21:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:11:05 2011] Counts = 3092.220000, rescaling region sizes by 2.000000
[Fri Dec 16 22:11:05 2011] XMMSAS src. selection expression = ellipse(24263.507200, 24669.733200, 637.614018, 637.614018, 0.000000, X, Y)
[Fri Dec 16 22:11:05 2011] Writing source region out to fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 16 22:11:05 2011] Extracting stamp from image fullrun_mos2_xmm0502040701_pi300-10000_cl_sm2.00.img.gz, (243, 247) - (316, 321)
[Fri Dec 16 22:11:05 2011] XMMSAS bgd. selection expression = annulus(24263.507200, 24669.733200, 2125.380061, 4250.760122, X, Y)
[Fri Dec 16 22:11:05 2011] Writing fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2.gif
[Fri Dec 16 22:11:07 2011] Mean detx,y = (56.45, 98.58) 
[Fri Dec 16 22:11:08 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 22:11:32 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 22:11:32 2011] Setting source spectrum file to fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 16 22:11:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Dec 16 22:18:01 2011] Updating aperture counts using extracted products
[Fri Dec 16 22:18:01 2011] Error reading totcts from fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 16 22:18:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 22:18:01 2011] Using photon index=1.80, rate=0.236, arf fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2.arf
[Fri Dec 16 22:18:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 22:18:01 2011] Updating source flux to 2.5e-12
[Fri Dec 16 22:18:30 2011] Reading fit data from xmm0502040701/analysis//spectral/fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2_pl.csv
[Fri Dec 16 22:18:30 2011] Spectral fit parameter nH value = 2.88445e+21
[Fri Dec 16 22:18:30 2011] Spectral fit parameter PhoIndex value = 7.55262
[Fri Dec 16 22:18:30 2011] Failed to get F(0.3-8.0) from xmm0502040701/analysis//spectral/fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Dec 16 22:18:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 22:18:30 2011] Using Nh = 2.9e+21, photon index=7.55, rate=0.236, arf fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src2.arf
[Fri Dec 16 22:18:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 22:18:30 2011] Updating source flux to 1.6e-12