[Fri Dec 16 21:14:50 2011] Detection parameters:
  Position = (365.3, 169.8) = 21 42 38.22 6 45 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.4 +/- 13.6
  Background counts = 4.5
  Rate = 0.009 +/- 0.001

[Fri Dec 16 21:14:50 2011] Off-axis axis estimate = 10.51'
[Fri Dec 16 21:28:54 2011] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:28:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 21:28:54 2011] Initial guess for spatial extent in simple fitting = 11.68"
[Fri Dec 16 21:28:54 2011] source mask rpix=2.7, npix_max = 40, mask sum = 34, frac = 0.838
[Fri Dec 16 21:28:54 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.68"
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 16 21:41:32 2011] Fit fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 16 21:41:32 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 16 21:41:32 2011] Fit fullrun_mos2_xmm0502040701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 16 21:41:36 2011] Spatial fit model total counts = 133.275000, observed total counts = 132.000000
[Fri Dec 16 21:41:36 2011] Offset between fit and detection position for source 1 = 0.001034 pixels
[Fri Dec 16 21:41:36 2011] 133.335300 total counts/ 48.025100 bgd. counts: snr = 12.310249
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001034 pixels
  Position = (365.3, 169.8) = 21 42 38.23 6 45 59.7
  Extent = 4.7 (3.9-5.7)", rotation angle = 0
  Source counts = 85.3 +/- 11.5
  Background counts = 48.0
  Rate = 0.007 +/- 0.0009
[Fri Dec 16 21:41:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 21:41:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 21:41:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 21:41:36 2011] Source does appear to be extended
[Fri Dec 16 21:41:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 21:49:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:49:50 2011] Initial guess for spatial extent in simple fitting = 4.75"
[Fri Dec 16 21:49:50 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.888
[Fri Dec 16 21:49:50 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.75"
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 16 21:57:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src3.csv
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 16 21:57:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src3.csv
[Fri Dec 16 21:57:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 16 21:57:52 2011] fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 16 21:57:52 2011] Fit fullrun_mos2_xmm0502040701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 16 21:57:55 2011] Warning, spatial fit 3 centroid is now closest to src. 10
[Fri Dec 16 21:57:55 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 21:57:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 21:57:55 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 21:57:55 2011] Source does appear to be extended
[Fri Dec 16 21:57:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:11:05 2011] XMMSAS src. selection expression = ellipse(31729.065200, 14725.714820, 284.839808, 284.839808, 0.000000, X, Y)
[Fri Dec 16 22:11:05 2011] Writing source region out to fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 16 22:11:05 2011] Extracting stamp from image fullrun_mos2_xmm0502040701_pi300-10000_cl_sm2.00.img.gz, (349, 153) - (382, 186)
[Fri Dec 16 22:11:05 2011] XMMSAS bgd. selection expression = annulus(31729.065200, 14725.714820, 474.733014, 949.466027, X, Y)
[Fri Dec 16 22:11:05 2011] Writing fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src1.gif
[Fri Dec 16 22:11:45 2011] Mean detx,y = (10397.92, 6989.86) 
[Fri Dec 16 22:11:46 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 22:11:55 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 22:11:55 2011] Setting source spectrum file to fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 16 22:11:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 16 22:17:26 2011] Not generating rmf since there are only 85 counts
[Fri Dec 16 22:17:26 2011] rmf not generated due to insufficient counts
[Fri Dec 16 22:18:01 2011] Updating aperture counts using extracted products
[Fri Dec 16 22:18:01 2011] Error reading totcts from fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 16 22:18:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 22:18:01 2011] Using photon index=1.80, rate=0.0065, arf fullrun_mos2_xmm0502040701_pi300-10000_pass1_cl_src1.arf
[Fri Dec 16 22:18:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 22:18:01 2011] Updating source flux to 2.5e-13
[Fri Dec 16 22:18:21 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting