[Wed Dec 21 04:04:42 2011] Detection parameters:
  Position = (280.1, 284.0) = 21 43 3.23 6 54 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4295.7 +/- 78.1
  Background counts = 11.4
  Rate = 0.3 +/- 0.006

[Wed Dec 21 04:04:43 2011] Off-axis axis estimate = 1.69'
[Wed Dec 21 04:41:17 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 04:41:17 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Dec 21 04:41:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed Dec 21 04:41:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Dec 21 05:01:00 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 21 05:01:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 05:01:00 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 21 05:01:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 05:01:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 05:01:00 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 21 05:01:00 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 21 05:01:00 2011] Fit fullrun_mos2_xmm0502040601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 21 05:01:08 2011] Spatial fit model total counts = 3813.000000, observed total counts = 3813.000000
[Wed Dec 21 05:01:08 2011] Offset between fit and detection position for source 1 = 0.060404 pixels
[Wed Dec 21 05:01:08 2011] 3824.146000 total counts/ 847.626000 bgd. counts: snr = 102.236664
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.060404 pixels
  Position = (280.2, 284.1) = 21 43 3.22 6 54 16.0
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2976.5 +/- 61.8
  Background counts = 847.6
  Rate = 0.2 +/- 0.005
[Wed Dec 21 05:01:08 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 05:01:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 05:01:08 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 05:01:08 2011] Source does appear to be extended
[Wed Dec 21 05:01:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 05:21:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 05:21:49 2011] Initial guess for spatial extent in simple fitting = 5.33"
[Wed Dec 21 05:21:49 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.343
[Wed Dec 21 05:21:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Wed Dec 21 05:41:08 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 21 05:41:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 05:41:08 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 21 05:41:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 05:41:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 05:41:08 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 21 05:41:08 2011] fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 21 05:41:08 2011] Fit fullrun_mos2_xmm0502040601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 21 05:41:17 2011] Spatial fit model total counts = 3813.000000, observed total counts = 3813.000000
[Wed Dec 21 05:41:17 2011] Offset between fit and detection position for source 1 = 0.000006 pixels
[Wed Dec 21 05:41:17 2011] 3824.148000 total counts/ 847.698000 bgd. counts: snr = 102.229918
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000006 pixels
  Position = (280.2, 284.1) = 21 43 3.22 6 54 16.0
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2976.4 +/- 61.8
  Background counts = 847.7
  Rate = 0.2 +/- 0.005
[Wed Dec 21 05:41:17 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 05:41:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 05:41:17 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 05:41:17 2011] Source does appear to be extended
[Wed Dec 21 05:41:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 06:38:43 2011] Counts = 2976.450000, rescaling region sizes by 2.000000
[Wed Dec 21 06:38:43 2011] XMMSAS src. selection expression = ellipse(24327.985540, 24667.694200, 639.978018, 639.978018, 0.000000, X, Y)
[Wed Dec 21 06:38:43 2011] Writing source region out to fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 21 06:38:43 2011] Extracting stamp from image fullrun_mos2_xmm0502040601_pi300-10000_cl_sm2.00.img.gz, (243, 247) - (317, 321)
[Wed Dec 21 06:38:43 2011] XMMSAS bgd. selection expression = annulus(24327.985540, 24667.694200, 2133.260061, 4266.520123, X, Y)
[Wed Dec 21 06:38:43 2011] Writing fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1.gif
[Wed Dec 21 06:38:50 2011] Mean detx,y = (73.18, 56.79) 
[Wed Dec 21 06:38:52 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 06:39:36 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 06:39:36 2011] Setting source spectrum file to fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 06:39:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 21 06:51:19 2011] Updating aperture counts using extracted products
[Wed Dec 21 06:51:19 2011] Error reading totcts from fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 06:51:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 06:51:20 2011] Using photon index=1.80, rate=0.229, arf fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 06:51:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 06:51:20 2011] Updating source flux to 2.4e-12
[Wed Dec 21 06:52:12 2011] Reading fit data from xmm0502040601/analysis//spectral/fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Dec 21 06:52:12 2011] Spectral fit parameter nH value = 2.44366e+21
[Wed Dec 21 06:52:12 2011] Spectral fit parameter PhoIndex value = 7.0888
[Wed Dec 21 06:52:12 2011] Failed to get F(0.3-8.0) from xmm0502040601/analysis//spectral/fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Dec 21 06:52:12 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 06:52:12 2011] Using Nh = 2.4e+21, photon index=7.09, rate=0.229, arf fullrun_mos2_xmm0502040601_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 06:52:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 06:52:12 2011] Updating source flux to 1.5e-12