[Thu Apr  5 20:37:28 2012] Detection parameters:
  Position = (254.5, 385.3) = 11 4 43.49 38 17 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.2 +/- 17.2
  Background counts = 60.1
  Rate = 0.01 +/- 0.001

[Thu Apr  5 20:37:28 2012] Off-axis axis estimate = 7.05'
[Thu Apr  5 21:12:47 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 21:12:47 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Apr  5 21:12:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.675
[Thu Apr  5 21:12:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.96"
[Thu Apr  5 22:06:09 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Apr  5 22:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 22:06:09 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Apr  5 22:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_src1.csv
[Thu Apr  5 22:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 22:06:09 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Apr  5 22:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Apr  5 22:06:09 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Apr  5 22:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Apr  5 22:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 22:06:16 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Thu Apr  5 22:06:16 2012] Spatial fit model total counts = 880.178000, observed total counts = 781.000000
[Thu Apr  5 22:06:16 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Apr  5 22:06:16 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 22:06:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 22:06:16 2012] Assessing source extent using major
[Thu Apr  5 22:06:16 2012] Source does appear to be extended
[Thu Apr  5 22:06:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 22:06:16 2012] Source is confused with source 16
[Thu Apr  5 23:09:09 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 23:09:09 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Apr  5 23:09:09 2012] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.675
[Thu Apr  5 23:09:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.96"
[Fri Apr  6 00:43:30 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Apr  6 00:43:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 00:43:30 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Apr  6 00:43:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 00:43:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 00:43:30 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Apr  6 00:43:30 2012] fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Apr  6 00:43:30 2012] Fit fullrun_mos2_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Apr  6 00:43:36 2012] Spatial fit model total counts = 751.176000, observed total counts = 708.000000
[Fri Apr  6 00:43:36 2012] Offset between fit and detection position for source 17 = 0.111704 pixels
[Fri Apr  6 00:43:36 2012] 571.620000 total counts/ 328.370000 bgd. counts: snr = 13.423665
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.111704 pixels
  Position = (254.6, 385.2) = 11 4 43.47 38 17 6.3
  Extent = 10.1 (6.8-13.1)", rotation angle = 0
  Source counts = 243.2 +/- 23.9
  Background counts = 328.4
  Rate = 0.009 +/- 0.0009
[Fri Apr  6 00:43:36 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 00:43:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 00:43:36 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 00:43:36 2012] Source does appear to be extended
[Fri Apr  6 00:43:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 01:28:41 2012] XMMSAS src. selection expression = ellipse(22099.062200, 33460.796600, 604.278017, 604.278017, 0.000000, X, Y)
[Fri Apr  6 01:28:41 2012] Writing source region out to fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17_src.reg
[Fri Apr  6 01:28:41 2012] Extracting stamp from image fullrun_mos2_xmm0502030101_pi300-10000_cl_sm2.00.img.gz, (220, 350) - (289, 420)
[Fri Apr  6 01:28:41 2012] XMMSAS bgd. selection expression = annulus(22099.062200, 33460.796600, 1007.130029, 2014.260058, X, Y) && !ellipse(21710.211600, 34152.128000, 1608.840046, 1608.840046, 0.000000, X, Y) && !ellipse(20325.468000, 36329.704000, 3699.600106, 3699.600106, 0.000000, X, Y) && !ellipse(18925.349243, 38371.760272, 4003.376115, 743.980452, 57.668454, X, Y) && !ellipse(20056.592000, 36803.000000, 1751.048050, 1751.048050, 0.000000, X, Y) && !ellipse(20608.256000, 35789.928000, 3383.488097, 852.384025, 236.262000, X, Y) && !ellipse(19554.926000, 37451.140000, 3393.336098, 3393.336098, 0.000000, X, Y) && !ellipse(18872.944000, 38182.576000, 4150.016119, 2795.096080, 90.000000, X, Y) && !ellipse(19757.868000, 37220.174000, 2605.880075, 2605.880075, 0.000000, X, Y) && !ellipse(21537.671417, 34613.711945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21059.328000, 35188.172000, 1691.744049, 1691.744049, 0.000000, X, Y)
[Fri Apr  6 01:28:41 2012] Writing fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17.gif
[Fri Apr  6 01:28:43 2012] Mean detx,y = (256.09, 6894.07) 
[Fri Apr  6 01:28:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 01:28:53 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 01:28:53 2012] Setting source spectrum file to fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Apr  6 01:28:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Apr  6 02:46:33 2012] Updating aperture counts using extracted products
[Fri Apr  6 02:46:33 2012] Error reading totcts from fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Apr  6 02:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 02:46:33 2012] Using photon index=1.80, rate=0.00935, arf fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17.arf
[Fri Apr  6 02:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 02:46:33 2012] Updating source flux to 2.4e-13
[Fri Apr  6 02:48:34 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Fri Apr  6 02:48:34 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Fri Apr  6 02:52:29 2012] Reading fit data from xmm0502030101/analysis//spectral/fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17_pl.csv
[Fri Apr  6 02:52:29 2012] Spectral fit parameter nH value = 9.30893e+20
[Fri Apr  6 02:52:29 2012] Spectral fit parameter PhoIndex value = 2.70412
[Fri Apr  6 02:52:29 2012] Failed to get F(0.3-8.0) from xmm0502030101/analysis//spectral/fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 02:52:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 02:52:29 2012] Using Nh = 9.3e+20, photon index=2.70, rate=0.00935, arf fullrun_mos2_xmm0502030101_pi300-10000_pass1_cl_src17.arf
[Fri Apr  6 02:52:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 02:52:29 2012] Updating source flux to 1.8e-13