[Thu Apr  5 20:37:13 2012] Detection parameters:
  Position = (254.3, 388.1) = 11 4 43.55 38 17 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.4 +/- 22.8
  Background counts = 62.1
  Rate = 0.01 +/- 0.001

[Thu Apr  5 20:37:14 2012] Off-axis axis estimate = 7.24'
[Thu Apr  5 20:38:09 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Apr  5 20:38:09 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Apr  5 20:38:09 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Thu Apr  5 20:38:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.05"
[Thu Apr  5 21:12:47 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Apr  5 21:12:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_src3.csv
[Thu Apr  5 21:12:47 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Apr  5 21:12:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_src3.csv
[Thu Apr  5 21:12:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 21:12:47 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Apr  5 21:12:47 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Apr  5 21:12:47 2012] Fit fullrun_mos1_xmm0502030101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Apr  5 22:06:13 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.690916 pixels away
[Thu Apr  5 22:06:13 2012] Spatial fit model total counts = 1031.190000, observed total counts = 1033.000000
[Thu Apr  5 22:06:13 2012] Offset between fit and detection position for source 3 = 1.700739 pixels
[Thu Apr  5 22:06:13 2012] Warning, changing simple spatial fit ID from 3 to 16
[Thu Apr  5 22:06:13 2012] 1034.550000 total counts/ 516.822000 bgd. counts: snr = 22.773572
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.700739 pixels
  Position = (254.1, 389.8) = 11 4 43.63 38 17 26.4
  Extent = 20.8 (20.8-20.8)", rotation angle = 0
  Source counts = 517.7 +/- 32.2
  Background counts = 516.8
  Rate = 0.02 +/- 0.001
[Thu Apr  5 22:06:13 2012] Vigneting correction estimate = 1.000000
[Thu Apr  5 22:06:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Apr  5 22:06:13 2012] Assessing source extent using major axis lower bound
[Thu Apr  5 22:06:13 2012] Source does appear to be extended
[Thu Apr  5 22:06:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Apr  5 22:06:13 2012] Source is confused with source 16
[Thu Apr  5 22:06:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Apr  5 22:06:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Apr  5 22:06:20 2012] Initial guess for spatial extent in simple fitting = 20.78"
[Thu Apr  5 22:06:20 2012] source mask rpix=4.8, npix_max = 111, mask sum = 109, frac = 0.979
[Thu Apr  5 22:06:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 20.78"
[Thu Apr  5 23:09:09 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Apr  5 23:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_src3.csv
[Thu Apr  5 23:09:09 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Apr  5 23:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_src3.csv
[Thu Apr  5 23:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Apr  5 23:09:09 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Apr  5 23:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Apr  5 23:09:09 2012] fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Apr  5 23:09:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Apr  5 23:09:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502030101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 00:43:33 2012] Warning, spatial fit 3 centroid is now closest to src. 16
[Fri Apr  6 00:43:33 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 00:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 00:43:33 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 00:43:33 2012] Source does appear to be extended
[Fri Apr  6 00:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 00:43:40 2012] XMMSAS src. selection expression = ellipse(22059.822000, 33861.954000, 1246.734036, 1246.734036, 0.000000, X, Y)
[Fri Apr  6 00:43:40 2012] Writing source region out to fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3_src.reg
[Fri Apr  6 00:43:40 2012] Extracting stamp from image fullrun_mos1_xmm0502030101_pi300-10000_cl_sm2.00.img.gz, (182, 318) - (326, 461)
[Fri Apr  6 00:43:40 2012] XMMSAS bgd. selection expression = annulus(22059.822000, 33861.954000, 2077.890060, 4155.780120, X, Y) && !ellipse(19323.512390, 37699.928619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17999.374000, 39771.902000, 4173.728120, 521.716015, 56.429000, X, Y) && !ellipse(19560.092000, 37182.932000, 1928.760055, 1928.760055, 0.000000, X, Y) && !ellipse(20133.556000, 36413.120000, 3406.312098, 3406.312098, 0.000000, X, Y) && !ellipse(20833.140000, 35553.624000, 1703.240049, 1703.240049, 0.000000, X, Y) && !ellipse(18683.153839, 38668.881561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21042.014000, 35228.014000, 3425.760099, 500.272014, 54.145400, X, Y) && !ellipse(21179.398000, 34979.232000, 1662.328048, 1106.168032, 56.251000, X, Y) && !ellipse(21631.696625, 34401.952118, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Apr  6 00:43:40 2012] Writing fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3.gif
[Fri Apr  6 00:44:08 2012] Mean detx,y = (7489.37, -188.43) 
[Fri Apr  6 00:44:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 00:44:28 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 00:44:28 2012] Setting source spectrum file to fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Apr  6 00:44:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Apr  6 02:46:33 2012] Updating aperture counts using extracted products
[Fri Apr  6 02:46:33 2012] Error reading totcts from fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Apr  6 02:46:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 02:46:33 2012] Using photon index=1.80, rate=0.0195, arf fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3.arf
[Fri Apr  6 02:46:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 02:46:33 2012] Updating source flux to 2.3e-13
[Fri Apr  6 02:46:34 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Apr  6 02:48:34 2012] Reading fit data from xmm0502030101/analysis//spectral/fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3_pl.csv
[Fri Apr  6 02:48:34 2012] Spectral fit parameter nH value = 8.62576e+19
[Fri Apr  6 02:48:34 2012] Spectral fit parameter PhoIndex value = 2.20145
[Fri Apr  6 02:48:34 2012] Failed to get F(0.3-8.0) from xmm0502030101/analysis//spectral/fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 02:48:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 02:48:34 2012] Using Nh = 8.6e+19, photon index=2.20, rate=0.0195, arf fullrun_mos1_xmm0502030101_pi300-10000_pass1_cl_src3.arf
[Fri Apr  6 02:48:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 02:48:34 2012] Updating source flux to 2e-13