[Sat Feb 25 23:51:58 2012] Detection parameters:
  Position = (348.6, 204.1) = 1 37 27.96 -12 59 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.9 +/- 28.9
  Background counts = 267.9
  Rate = 0.003 +/- 0.0004

[Sat Feb 25 23:51:59 2012] Off-axis axis estimate = 7.75'
[Sun Feb 26 00:00:44 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:00:44 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Feb 26 00:00:44 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.912
[Sun Feb 26 00:00:44 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 10.30"
[Sun Feb 26 04:44:49 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src46.ximg exists
[Sun Feb 26 04:44:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src46.csv
[Sun Feb 26 04:44:49 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun Feb 26 04:44:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src46.csv
[Sun Feb 26 04:44:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 04:44:51 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun Feb 26 04:44:51 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun Feb 26 04:44:51 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Sun Feb 26 09:48:16 2012] Warning, spatial fit 46 centroid is now closest to src. 47
[Sun Feb 26 09:48:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:16 2012] Assessing source extent using major
[Sun Feb 26 09:48:16 2012] Source does appear to be extended
[Sun Feb 26 09:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:48:16 2012] Source is confused with source 46
[Sun Feb 26 09:49:04 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:49:04 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Feb 26 09:49:04 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.912
[Sun Feb 26 09:49:04 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 10.30"
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src48.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src48.csv
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src48_1.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src48.csv
[Sun Feb 26 17:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 17:49:04 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sun Feb 26 17:49:04 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sun Feb 26 17:49:04 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Mon Feb 27 01:26:38 2012] Spatial fit model total counts = 6856.720000, observed total counts = 6853.000000
[Mon Feb 27 01:26:38 2012] Offset between fit and detection position for source 51 = 3.436501 pixels
[Mon Feb 27 01:26:38 2012] Warning, changing simple spatial fit ID from 48 to 43
[Mon Feb 27 01:26:38 2012] 6511.300000 total counts/ 5121.900000 bgd. counts: snr = 19.413853
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 3.436501 pixels
  Position = (347.3, 200.9) = 1 37 28.34 -12 59 16.0
  Extent = 30.3 (27.5-34.7)", rotation angle = 0
  Source counts = 1389.4 +/- 80.7
  Background counts = 5121.9
  Rate = 0.04 +/- 0.002
[Mon Feb 27 01:26:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:38 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:26:38 2012] Source does appear to be extended
[Mon Feb 27 01:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 01:27:29 2012] Counts = 1389.400000, rescaling region sizes by 2.000000
[Mon Feb 27 01:27:29 2012] XMMSAS src. selection expression = ellipse(30166.216000, 17428.410000, 3630.828104, 3630.828104, 0.000000, X, Y)
[Mon Feb 27 01:27:29 2012] Writing source region out to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src51_src.reg
[Mon Feb 27 01:27:29 2012] Extracting stamp from image fullrun_pn_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (139, 0) - (556, 410)
[Mon Feb 27 01:27:30 2012] XMMSAS bgd. selection expression = annulus(30166.216000, 17428.410000, 12102.760348, 24205.520697, X, Y) && !ellipse(32361.193054, 35051.021820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21427.055700, 34343.618200, 392.546411, 392.546411, 0.000000, X, Y) && !ellipse(20798.702000, 33261.296000, 2965.872085, 2965.872085, 0.000000, X, Y) && !ellipse(20797.025772, 34200.225647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.980000, 34180.380000, 3192.768092, 2461.120071, 37.763000, X, Y) && !ellipse(20237.202225, 33012.774414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20672.402000, 32577.684000, 1604.456046, 1604.456046, 264.570104, X, Y) && !ellipse(26976.218600, 32525.786400, 329.383209, 329.383209, 0.000000, X, Y) && !ellipse(21529.243800, 31927.464000, 1482.936043, 1482.936043, 0.000000, X, Y) && !ellipse(25570.715600, 31615.677200, 439.312813, 439.312813, 0.000000, X, Y) && !ellipse(22787.858337, 31343.783173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.484000, 30861.888000, 1506.640043, 1506.640043, 0.000000, X, Y) && !ellipse(41646.050873, 31065.496277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21460.714000, 31280.696000, 2297.720066, 900.128026, 110.496000, X, Y) && !ellipse(22230.338000, 30744.002000, 737.951221, 737.951221, 0.000000, X, Y) && !ellipse(20163.942001, 30940.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.830000, 30433.598000, 1354.256039, 1354.256039, 0.000000, X, Y) && !ellipse(20793.289200, 30016.313600, 677.127219, 677.127219, 0.000000, X, Y) && !ellipse(28925.035500, 29891.009600, 567.358416, 567.358416, 0.000000, X, Y) && !ellipse(20787.993362, 29556.053711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42203.195660, 29591.527000, 659.054419, 659.054419, 0.000000, X, Y) && !ellipse(11560.087600, 28433.796880, 405.790412, 405.790412, 0.000000, X, Y) && !ellipse(21995.860000, 30155.438000, 877.600025, 877.600025, 0.000000, X, Y) && !ellipse(12075.389938, 28028.490570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.174000, 27525.022000, 1383.608040, 1383.608040, 0.000000, X, Y) && !ellipse(24750.711700, 28040.097540, 416.116012, 416.116012, 0.000000, X, Y) && !ellipse(16795.373581, 27714.371399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.787018, 27863.602631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16461.346000, 27187.152000, 397.696811, 397.696811, 0.000000, X, Y) && !ellipse(23157.878558, 26050.219555, 821.152368, 410.629663, 347.825004, X, Y) && !ellipse(19385.631200, 25903.528000, 485.011214, 485.011214, 0.000000, X, Y) && !ellipse(21638.186800, 24615.043200, 518.612815, 518.612815, 0.000000, X, Y) && !ellipse(30583.475160, 23923.745800, 425.920812, 425.920812, 0.000000, X, Y) && !ellipse(39133.940000, 23152.426200, 396.796811, 396.796811, 0.000000, X, Y) && !ellipse(30571.544140, 22703.336000, 417.026412, 417.026412, 0.000000, X, Y) && !ellipse(21520.651800, 20953.580600, 315.146975, 315.146975, 0.000000, X, Y) && !ellipse(34543.914997, 20849.766586, 626.360763, 390.297515, 112.852429, X, Y) && !ellipse(30761.352051, 20713.669800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13931.634600, 20857.048200, 402.164012, 402.164012, 0.000000, X, Y) && !ellipse(12742.642420, 19821.764000, 400.474412, 400.474412, 0.000000, X, Y) && !ellipse(30528.003200, 18681.930800, 1618.040047, 1618.040047, 0.000000, X, Y) && !ellipse(30027.344000, 18174.972000, 766.732822, 766.732822, 0.000000, X, Y) && !ellipse(39332.537994, 18012.676636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31330.160000, 18457.292000, 3333.968096, 3333.968096, 0.000000, X, Y) && !ellipse(29478.080000, 17575.320000, 1612.216046, 711.171220, 125.533400, X, Y) && !ellipse(30735.450000, 17486.006000, 1666.984048, 1666.984048, 0.000000, X, Y) && !ellipse(29717.625800, 17568.466000, 2066.672059, 1482.824043, 135.024347, X, Y) && !ellipse(30738.545349, 17001.719803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30991.924000, 16282.893000, 1300.000037, 1300.000037, 0.000000, X, Y) && !ellipse(19765.925200, 16441.904000, 597.484817, 402.340812, 7.994068, X, Y) && !ellipse(28001.986000, 17627.950000, 1412.264041, 1412.264041, 0.000000, X, Y) && !ellipse(30611.773010, 16219.662338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29538.511400, 16900.316000, 1693.408049, 1693.408049, 0.000000, X, Y) && !ellipse(28799.996000, 16320.100000, 852.688025, 852.688025, 0.000000, X, Y) && !ellipse(30298.340600, 15164.682000, 1600.632046, 1600.632046, 0.000000, X, Y) && !ellipse(27581.284000, 7876.500000, 891.040026, 360.238410, 337.798723, X, Y)
[Mon Feb 27 01:27:30 2012] Writing fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src51.gif
[Mon Feb 27 02:55:11 2012] Mean detx,y = (-8621.94, -4231.66) 
[Mon Feb 27 02:55:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 03:07:53 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 03:07:54 2012] Setting source spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon Feb 27 03:07:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Mon Feb 27 10:06:38 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:38 2012] Error reading totcts from fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon Feb 27 10:06:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:42 2012] Using photon index=1.80, rate=0.0351, arf fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src51.arf
[Mon Feb 27 10:06:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:42 2012] Updating source flux to 1.3e-13
[Mon Feb 27 10:17:10 2012] Flag c found in src. 51 procflags, skipping spectral fitting