[Sat Feb 25 23:51:57 2012] Detection parameters:
  Position = (193.6, 319.1) = 1 38 14.06 -12 50 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1185.1 +/- 152.6
  Background counts = 199.9
  Rate = 0.02 +/- 0.002

[Sat Feb 25 23:51:59 2012] Off-axis axis estimate = 7.75'
[Sun Feb 26 00:00:44 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:00:44 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Feb 26 00:00:44 2012] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.729
[Sun Feb 26 00:00:44 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.30"
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src27.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src27.csv
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src27.csv
[Sun Feb 26 04:44:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Feb 26 04:44:50 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Feb 26 09:48:16 2012] Warning, spatial fit 27 centroid is now closest to src. 32
[Sun Feb 26 09:48:16 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 15.493205 pixels away
[Sun Feb 26 09:48:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:16 2012] Assessing source extent using major
[Sun Feb 26 09:48:16 2012] Source does appear to be extended
[Sun Feb 26 09:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:48:16 2012] Source is confused with source 32
[Sun Feb 26 09:49:04 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:49:04 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Feb 26 09:49:04 2012] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.729
[Sun Feb 26 09:49:04 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.30"
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src29.ximg exists
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Feb 26 17:49:02 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Feb 26 17:49:03 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Feb 27 01:26:38 2012] Warning, spatial fit 29 centroid is now closest to src. 32
[Mon Feb 27 01:26:38 2012] Source 30 is offset by 3.924984 and 6.111264 pixels which is larger than
2 X fitted extent = 2.366377 x 2.366377, not incorporating fit results
[Mon Feb 27 01:26:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:38 2012] Assessing source extent using major
[Mon Feb 27 01:26:38 2012] Source does appear to be extended
[Mon Feb 27 01:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 01:27:28 2012] Counts = 1185.072266, rescaling region sizes by 2.000000
[Mon Feb 27 01:27:28 2012] XMMSAS src. selection expression = ellipse(16795.373581, 27714.371399, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing source region out to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src30_src.reg
[Mon Feb 27 01:27:28 2012] Extracting stamp from image fullrun_pn_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (119, 244) - (269, 394)
[Mon Feb 27 01:27:28 2012] XMMSAS bgd. selection expression = annulus(16795.373581, 27714.371399, 4350.000000, 8700.000000, X, Y) && !ellipse(21427.055700, 34343.618200, 392.546411, 392.546411, 0.000000, X, Y) && !ellipse(20798.702000, 33261.296000, 2965.872085, 2965.872085, 0.000000, X, Y) && !ellipse(20797.025772, 34200.225647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20282.980000, 34180.380000, 3192.768092, 2461.120071, 37.763000, X, Y) && !ellipse(20237.202225, 33012.774414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20672.402000, 32577.684000, 1604.456046, 1604.456046, 264.570104, X, Y) && !ellipse(21529.243800, 31927.464000, 1482.936043, 1482.936043, 0.000000, X, Y) && !ellipse(25570.715600, 31615.677200, 439.312813, 439.312813, 0.000000, X, Y) && !ellipse(22787.858337, 31343.783173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.484000, 30861.888000, 1506.640043, 1506.640043, 0.000000, X, Y) && !ellipse(21460.714000, 31280.696000, 2297.720066, 900.128026, 110.496000, X, Y) && !ellipse(22230.338000, 30744.002000, 737.951221, 737.951221, 0.000000, X, Y) && !ellipse(20163.942001, 30940.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.830000, 30433.598000, 1354.256039, 1354.256039, 0.000000, X, Y) && !ellipse(20793.289200, 30016.313600, 677.127219, 677.127219, 0.000000, X, Y) && !ellipse(20787.993362, 29556.053711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11560.087600, 28433.796880, 405.790412, 405.790412, 0.000000, X, Y) && !ellipse(21995.860000, 30155.438000, 877.600025, 877.600025, 0.000000, X, Y) && !ellipse(12075.389938, 28028.490570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.174000, 27525.022000, 1383.608040, 1383.608040, 0.000000, X, Y) && !ellipse(24750.711700, 28040.097540, 416.116012, 416.116012, 0.000000, X, Y) && !ellipse(22358.787018, 27863.602631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16461.346000, 27187.152000, 397.696811, 397.696811, 0.000000, X, Y) && !ellipse(23157.878558, 26050.219555, 821.152368, 410.629663, 347.825004, X, Y) && !ellipse(19385.631200, 25903.528000, 485.011214, 485.011214, 0.000000, X, Y) && !ellipse(21638.186800, 24615.043200, 518.612815, 518.612815, 0.000000, X, Y) && !ellipse(21520.651800, 20953.580600, 315.146975, 315.146975, 0.000000, X, Y) && !ellipse(13931.634600, 20857.048200, 402.164012, 402.164012, 0.000000, X, Y) && !ellipse(12742.642420, 19821.764000, 400.474412, 400.474412, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src30.gif
[Mon Feb 27 02:21:00 2012] Mean detx,y = (7745.97, -1476.68) 
[Mon Feb 27 02:21:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:23:48 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:23:49 2012] Setting source spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Feb 27 02:23:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Feb 27 04:52:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 04:52:53 2012] rmf not generated due to insufficient counts
[Mon Feb 27 10:06:36 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:36 2012] Error reading totcts from fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Feb 27 10:06:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:41 2012] Using photon index=1.80, rate=0.0169, arf fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src30.arf
[Mon Feb 27 10:06:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:41 2012] Updating source flux to 6.7e-14
[Mon Feb 27 10:17:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting