[Sat Feb 25 23:51:57 2012] Detection parameters:
  Position = (255.0, 339.1) = 1 37 55.79 -12 49 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2822.7 +/- 69.6
  Background counts = 259.3
  Rate = 0.06 +/- 0.001

[Sat Feb 25 23:51:59 2012] Off-axis axis estimate = 4.31'
[Sun Feb 26 00:00:44 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:00:44 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sun Feb 26 00:00:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.981
[Sun Feb 26 00:00:44 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.58"
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src23.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src23.csv
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src23.csv
[Sun Feb 26 04:44:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Feb 26 04:44:50 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Feb 26 09:48:16 2012] Source 26 is offset by 2.142538 and -7.607458 pixels which is larger than
2 X fitted extent = 4.880736 x 4.880736, not incorporating fit results
[Sun Feb 26 09:48:16 2012] Source 26 is offset by 7.720447 and 1.583117 pixels which is larger than
2 X fitted extent = 4.219770 x 4.219770, not incorporating fit results
[Sun Feb 26 09:48:16 2012] Warning, spatial fit 23 centroid is now closest to src. 18
[Sun Feb 26 09:48:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:16 2012] Assessing source extent using major
[Sun Feb 26 09:48:16 2012] Source does appear to be extended
[Sun Feb 26 09:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:49:04 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:49:04 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sun Feb 26 09:49:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.981
[Sun Feb 26 09:49:04 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.58"
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src25.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src25.csv
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src25.csv
[Sun Feb 26 17:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Feb 26 17:49:03 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Feb 27 01:26:38 2012] Spatial fit model total counts = 5287.260000, observed total counts = 5271.000000
[Mon Feb 27 01:26:38 2012] Offset between fit and detection position for source 26 = 5.394022 pixels
[Mon Feb 27 01:26:38 2012] Warning, changing simple spatial fit ID from 25 to 12
[Mon Feb 27 01:26:38 2012] 5215.759000 total counts/ 4523.100000 bgd. counts: snr = 10.299150
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.394022 pixels
  Position = (253.9, 344.4) = 1 37 56.13 -12 48 51.8
  Extent = 14.3 (12.5-16.5)", rotation angle = 0
  Source counts = 692.7 +/- 72.2
  Background counts = 4523.1
  Rate = 0.02 +/- 0.002
[Mon Feb 27 01:26:38 2012] Spatial fit model total counts = 2366.310000, observed total counts = 2372.000000
[Mon Feb 27 01:26:38 2012] Offset between fit and detection position for source 26 = 2.837686 pixels
[Mon Feb 27 01:26:38 2012] Warning, changing simple spatial fit ID from 12 to 17
[Mon Feb 27 01:26:38 2012] 1423.287000 total counts/ 922.090000 bgd. counts: snr = 16.505239
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.837686 pixels
  Position = (253.4, 347.2) = 1 37 56.28 -12 48 39.7
  Extent = 11.0 (9.9-12.1)", rotation angle = 0
  Source counts = 501.2 +/- 37.7
  Background counts = 922.1
  Rate = 0.01 +/- 0.001
[Mon Feb 27 01:26:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:38 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:26:38 2012] Source does appear to be extended
[Mon Feb 27 01:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 01:26:38 2012] Source is confused with source 15
[Mon Feb 27 01:26:38 2012] Source is confused with source 16
[Mon Feb 27 01:26:38 2012] Source is confused with source 18
[Mon Feb 27 01:27:28 2012] XMMSAS src. selection expression = ellipse(21995.860000, 30155.438000, 658.200019, 658.200019, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing source region out to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src26_src.reg
[Mon Feb 27 01:27:28 2012] Extracting stamp from image fullrun_pn_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (216, 309) - (291, 385)
[Mon Feb 27 01:27:28 2012] XMMSAS bgd. selection expression = annulus(21995.860000, 30155.438000, 1097.000032, 2194.000063, X, Y) && !ellipse(20798.702000, 33261.296000, 2965.872085, 2965.872085, 0.000000, X, Y) && !ellipse(20282.980000, 34180.380000, 3192.768092, 2461.120071, 37.763000, X, Y) && !ellipse(20237.202225, 33012.774414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20672.402000, 32577.684000, 1604.456046, 1604.456046, 264.570104, X, Y) && !ellipse(21529.243800, 31927.464000, 1482.936043, 1482.936043, 0.000000, X, Y) && !ellipse(22787.858337, 31343.783173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.484000, 30861.888000, 1506.640043, 1506.640043, 0.000000, X, Y) && !ellipse(21460.714000, 31280.696000, 2297.720066, 900.128026, 110.496000, X, Y) && !ellipse(22230.338000, 30744.002000, 737.951221, 737.951221, 0.000000, X, Y) && !ellipse(20163.942001, 30940.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.830000, 30433.598000, 1354.256039, 1354.256039, 0.000000, X, Y) && !ellipse(20793.289200, 30016.313600, 677.127219, 677.127219, 0.000000, X, Y) && !ellipse(20787.993362, 29556.053711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20569.174000, 27525.022000, 1383.608040, 1383.608040, 0.000000, X, Y) && !ellipse(22358.787018, 27863.602631, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src26.gif
[Mon Feb 27 02:16:19 2012] Mean detx,y = (4272.42, 3210.68) 
[Mon Feb 27 02:16:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:17:15 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:17:16 2012] Setting source spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Feb 27 02:17:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Feb 27 10:06:36 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:36 2012] Error reading totcts from fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Feb 27 10:06:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:41 2012] Using photon index=1.80, rate=0.0127, arf fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src26.arf
[Mon Feb 27 10:06:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:41 2012] Updating source flux to 3.8e-14
[Mon Feb 27 10:17:10 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Mon Feb 27 10:17:10 2012] Flag c found in src. 26 procflags, skipping spectral fitting