[Sat Feb 25 23:51:57 2012] Detection parameters:
  Position = (486.3, 340.9) = 1 36 47.01 -12 49 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 723.8 +/- 34.5
  Background counts = 130.4
  Rate = 0.01 +/- 0.0005

[Sat Feb 25 23:51:59 2012] Off-axis axis estimate = 13.96'
[Sun Feb 26 00:00:44 2012] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:00:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 00:00:44 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Sun Feb 26 00:00:44 2012] source mask rpix=3.1, npix_max = 51, mask sum = 42, frac = 0.818
[Sun Feb 26 00:00:44 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.41"
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src19.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src19.csv
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src19.csv
[Sun Feb 26 04:44:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Feb 26 04:44:50 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Feb 26 09:48:16 2012] Warning, spatial fit 19 centroid is now closest to src. 14
[Sun Feb 26 09:48:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:16 2012] Assessing source extent using major
[Sun Feb 26 09:48:16 2012] Source does appear to be extended
[Sun Feb 26 09:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:49:04 2012] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:49:04 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Sun Feb 26 09:49:04 2012] source mask rpix=3.1, npix_max = 51, mask sum = 42, frac = 0.818
[Sun Feb 26 09:49:04 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.41"
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src21.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src21.csv
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src21.csv
[Sun Feb 26 17:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Feb 26 17:49:03 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Feb 27 01:26:38 2012] Spatial fit model total counts = 1068.030000, observed total counts = 1121.000000
[Mon Feb 27 01:26:38 2012] Offset between fit and detection position for source 22 = 0.655721 pixels
[Mon Feb 27 01:26:38 2012] 1013.295000 total counts/ 526.124000 bgd. counts: snr = 21.239162
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.655721 pixels
  Position = (485.7, 340.7) = 1 36 47.20 -12 49 7.5
  Extent = 8.2 (7.5-8.8)", rotation angle = 0
  Source counts = 487.2 +/- 31.8
  Background counts = 526.1
  Rate = 0.01 +/- 0.0008
[Mon Feb 27 01:26:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:38 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:26:38 2012] Source does appear to be extended
[Mon Feb 27 01:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 01:27:28 2012] XMMSAS src. selection expression = ellipse(42203.195660, 29591.527000, 494.290814, 494.290814, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing source region out to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src22_src.reg
[Mon Feb 27 01:27:28 2012] Extracting stamp from image fullrun_pn_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (457, 312) - (514, 369)
[Mon Feb 27 01:27:28 2012] XMMSAS bgd. selection expression = annulus(42203.195660, 29591.527000, 823.818024, 1647.636047, X, Y) && !ellipse(41646.050873, 31065.496277, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src22.gif
[Mon Feb 27 02:14:30 2012] Mean detx,y = (-13548.17, 12530.14) 
[Mon Feb 27 02:14:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:15:16 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:15:17 2012] Setting source spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb 27 02:15:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Feb 27 10:06:35 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:35 2012] Error reading totcts from fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Feb 27 10:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:40 2012] Using photon index=1.80, rate=0.0123, arf fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src22.arf
[Mon Feb 27 10:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:40 2012] Updating source flux to 1.6e-13