[Sat Feb 25 23:51:57 2012] Detection parameters:
  Position = (239.8, 345.2) = 1 38 0.33 -12 48 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.5 +/- 27.7
  Background counts = 248.2
  Rate = 0.005 +/- 0.0006

[Sat Feb 25 23:51:59 2012] Off-axis axis estimate = 5.44'
[Sun Feb 26 00:00:44 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:00:44 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sun Feb 26 00:00:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922
[Sun Feb 26 00:00:44 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.15"
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src16.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src16.csv
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src16.csv
[Sun Feb 26 04:44:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Feb 26 04:44:50 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Feb 26 09:48:16 2012] Spatial fit model total counts = 1961.260000, observed total counts = 1957.000000
[Sun Feb 26 09:48:16 2012] Offset between fit and detection position for source 19 = 0.431559 pixels
[Sun Feb 26 09:48:16 2012] 1879.334000 total counts/ 1771.950000 bgd. counts: snr = 2.551020
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.431559 pixels
  Position = (239.6, 345.6) = 1 38 0.39 -12 48 46.6
  Extent = 8.5 (6.1-17.0)", rotation angle = 0
  Source counts = 107.4 +/- 43.4
  Background counts = 1772.0
  Rate = 0.003 +/- 0.001
[Sun Feb 26 09:48:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:16 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 09:48:16 2012] Source does appear to be extended
[Sun Feb 26 09:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:48:16 2012] Source is confused with source 13
[Sun Feb 26 09:49:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:49:04 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Feb 26 09:49:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.045
[Sun Feb 26 09:49:04 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.46"
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src18.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src18.csv
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src18.csv
[Sun Feb 26 17:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Feb 26 17:49:03 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Feb 27 01:26:38 2012] Warning, spatial fit 18 centroid is now closest to src. 18
[Mon Feb 27 01:26:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:38 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:26:38 2012] Source does appear to be extended
[Mon Feb 27 01:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 01:27:28 2012] XMMSAS src. selection expression = ellipse(20793.289200, 30016.313600, 507.845415, 507.845415, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing source region out to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src19_src.reg
[Mon Feb 27 01:27:28 2012] Extracting stamp from image fullrun_pn_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (210, 316) - (269, 375)
[Mon Feb 27 01:27:28 2012] XMMSAS bgd. selection expression = annulus(20793.289200, 30016.313600, 846.409024, 1692.818049, X, Y) && !ellipse(20798.702000, 33261.296000, 2965.872085, 2965.872085, 0.000000, X, Y) && !ellipse(20282.980000, 34180.380000, 3192.768092, 2461.120071, 37.763000, X, Y) && !ellipse(20672.402000, 32577.684000, 1604.456046, 1604.456046, 264.570104, X, Y) && !ellipse(21529.243800, 31927.464000, 1482.936043, 1482.936043, 0.000000, X, Y) && !ellipse(22787.858337, 31343.783173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21055.484000, 30861.888000, 1506.640043, 1506.640043, 0.000000, X, Y) && !ellipse(21460.714000, 31280.696000, 2297.720066, 900.128026, 110.496000, X, Y) && !ellipse(22230.338000, 30744.002000, 737.951221, 737.951221, 0.000000, X, Y) && !ellipse(20163.942001, 30940.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21022.830000, 30433.598000, 1354.256039, 1354.256039, 0.000000, X, Y) && !ellipse(20787.993362, 29556.053711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21995.860000, 30155.438000, 877.600025, 877.600025, 0.000000, X, Y) && !ellipse(20569.174000, 27525.022000, 1383.608040, 1383.608040, 0.000000, X, Y) && !ellipse(22358.787018, 27863.602631, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src19.gif
[Mon Feb 27 02:11:51 2012] Mean detx,y = (5418.47, 2617.70) 
[Mon Feb 27 02:11:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:12:24 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:12:25 2012] Setting source spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Feb 27 02:12:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Feb 27 10:06:35 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:35 2012] Error reading totcts from fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Feb 27 10:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:40 2012] Using photon index=1.80, rate=0.00271, arf fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src19.arf
[Mon Feb 27 10:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:40 2012] Updating source flux to 8.9e-15
[Mon Feb 27 10:17:10 2012] Flag c found in src. 19 procflags, skipping spectral fitting