[Sat Feb 25 23:51:57 2012] Detection parameters:
  Position = (479.2, 357.6) = 1 36 49.11 -12 47 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.4 +/- 20.7
  Background counts = 120.9
  Rate = 0.002 +/- 0.0003

[Sat Feb 25 23:51:59 2012] Off-axis axis estimate = 13.79'
[Sun Feb 26 00:00:44 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:00:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 00:00:44 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Sun Feb 26 00:00:44 2012] source mask rpix=3.1, npix_max = 50, mask sum = 45, frac = 0.886
[Sun Feb 26 00:00:44 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.33"
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src11.csv
[Sun Feb 26 04:44:48 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 26 04:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src11.csv
[Sun Feb 26 04:44:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 26 04:44:50 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 26 04:44:50 2012] Fit fullrun_pn_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 26 09:48:16 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 17.450959 pixels away
[Sun Feb 26 09:48:16 2012] Source 14 is offset by 6.078286 and 3.801566 pixels which is larger than
2 X fitted extent = 1.541324 x 1.541324, not incorporating fit results
[Sun Feb 26 09:48:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:16 2012] Assessing source extent using major
[Sun Feb 26 09:48:16 2012] Source does appear to be extended
[Sun Feb 26 09:48:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:49:04 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 09:49:04 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Sun Feb 26 09:49:04 2012] source mask rpix=3.1, npix_max = 50, mask sum = 45, frac = 0.886
[Sun Feb 26 09:49:04 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.33"
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src13.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src13.csv
[Sun Feb 26 17:49:02 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Feb 26 17:49:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src13.csv
[Sun Feb 26 17:49:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Feb 26 17:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Feb 26 17:49:03 2012] fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Feb 26 17:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Feb 26 17:49:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 01:26:38 2012] Spatial fit model total counts = 342.403000, observed total counts = 422.000000
[Mon Feb 27 01:26:38 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 27 01:26:38 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:38 2012] Assessing source extent using major
[Mon Feb 27 01:26:38 2012] Source does appear to be extended
[Mon Feb 27 01:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 01:27:28 2012] XMMSAS src. selection expression = ellipse(41646.050873, 31065.496277, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing source region out to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src14_src.reg
[Mon Feb 27 01:27:28 2012] Extracting stamp from image fullrun_pn_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (442, 320) - (517, 395)
[Mon Feb 27 01:27:28 2012] XMMSAS bgd. selection expression = annulus(41646.050873, 31065.496277, 1087.500000, 2175.000000, X, Y) && !ellipse(42203.195660, 29591.527000, 659.054419, 659.054419, 0.000000, X, Y)
[Mon Feb 27 01:27:28 2012] Writing fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src14.gif
[Mon Feb 27 02:07:03 2012] Mean detx,y = (-12255.98, 13405.69) 
[Mon Feb 27 02:07:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:07:33 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:07:33 2012] Setting source spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Feb 27 02:07:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Feb 27 04:18:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 04:18:41 2012] rmf not generated due to insufficient counts
[Mon Feb 27 10:06:35 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:35 2012] Error reading totcts from fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Feb 27 10:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:39 2012] Using photon index=1.80, rate=0.0015, arf fullrun_pn_xmm0502020201_pi300-10000_pass1_cl_src14.arf
[Mon Feb 27 10:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:40 2012] Updating source flux to 1.7e-14
[Mon Feb 27 10:17:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting