[Sat Feb 25 23:53:46 2012] Detection parameters:
  Position = (232.6, 356.2) = 1 38 2.44 -12 47 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.6 +/- 20.6
  Background counts = 148.5
  Rate = 0.002 +/- 0.0004

[Sat Feb 25 23:53:47 2012] Off-axis axis estimate = 6.35'
[Sun Feb 26 06:56:38 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 06:56:38 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Sun Feb 26 06:56:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 29, frac = 0.989
[Sun Feb 26 06:56:38 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.60"
[Sun Feb 26 09:47:54 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src30.ximg exists
[Sun Feb 26 09:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src30.csv
[Sun Feb 26 09:47:54 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Feb 26 09:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src30.csv
[Sun Feb 26 09:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 09:47:55 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Feb 26 09:47:55 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Feb 26 09:47:55 2012] Fit fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Feb 26 09:48:39 2012] Spatial fit model total counts = 920.380000, observed total counts = 918.000000
[Sun Feb 26 09:48:39 2012] Offset between fit and detection position for source 20 = 0.170291 pixels
[Sun Feb 26 09:48:39 2012] 930.841600 total counts/ 884.156000 bgd. counts: snr = 1.570068
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.170291 pixels
  Position = (232.6, 356.3) = 1 38 2.47 -12 47 59.9
  Extent = 3.9 (2.4-5.6)", rotation angle = 0
  Source counts = 46.7 +/- 30.5
  Background counts = 884.2
  Rate = 0.0008 +/- 0.0005
  Deleting source due to low Poisson probability