[Sat Feb 25 23:53:45 2012] Detection parameters:
  Position = (223.5, 298.2) = 1 38 5.17 -12 52 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1080.5 +/- 42.8
  Background counts = 137.8
  Rate = 0.02 +/- 0.0007

[Sat Feb 25 23:53:47 2012] Off-axis axis estimate = 5.43'
[Sun Feb 26 06:56:38 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 06:56:38 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sun Feb 26 06:56:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923
[Sun Feb 26 06:56:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.15"
[Sun Feb 26 09:47:53 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Feb 26 09:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src2.csv
[Sun Feb 26 09:47:54 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Feb 26 09:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src2.csv
[Sun Feb 26 09:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 09:47:54 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Feb 26 09:47:54 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Feb 26 09:47:54 2012] Fit fullrun_mos2_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Feb 26 09:48:39 2012] Spatial fit model total counts = 1313.000000, observed total counts = 1313.000000
[Sun Feb 26 09:48:39 2012] Offset between fit and detection position for source 1 = 0.088363 pixels
[Sun Feb 26 09:48:39 2012] 1315.339000 total counts/ 720.474000 bgd. counts: snr = 22.162016
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.088363 pixels
  Position = (223.5, 298.3) = 1 38 5.19 -12 52 12.4
  Extent = 4.8 (4.4-5.2)", rotation angle = 0
  Source counts = 594.9 +/- 36.3
  Background counts = 720.5
  Rate = 0.01 +/- 0.0006
[Sun Feb 26 09:48:39 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:39 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 09:48:39 2012] Source does appear to be extended
[Sun Feb 26 09:48:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 20:35:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 20:35:01 2012] Initial guess for spatial extent in simple fitting = 4.76"
[Sun Feb 26 20:35:01 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.885
[Sun Feb 26 20:35:01 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.76"
[Mon Feb 27 01:26:12 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Feb 27 01:26:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_src2.csv
[Mon Feb 27 01:26:12 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Feb 27 01:26:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_src2.csv
[Mon Feb 27 01:26:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 01:26:12 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Feb 27 01:26:12 2012] fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Feb 27 01:26:12 2012] Fit fullrun_mos2_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Feb 27 01:27:02 2012] Spatial fit model total counts = 1313.000000, observed total counts = 1313.000000
[Mon Feb 27 01:27:02 2012] Offset between fit and detection position for source 1 = 0.000122 pixels
[Mon Feb 27 01:27:02 2012] 1315.345000 total counts/ 720.573000 bgd. counts: snr = 22.157029
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000122 pixels
  Position = (223.5, 298.3) = 1 38 5.19 -12 52 12.4
  Extent = 4.8 (4.4-5.2)", rotation angle = 0
  Source counts = 594.8 +/- 36.3
  Background counts = 720.6
  Rate = 0.01 +/- 0.0006
[Mon Feb 27 01:27:03 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:27:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:27:03 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:27:03 2012] Source does appear to be extended
[Mon Feb 27 01:27:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 08:34:09 2012] XMMSAS src. selection expression = ellipse(19392.056400, 25899.845000, 285.489608, 285.489608, 0.000000, X, Y)
[Mon Feb 27 08:34:09 2012] Writing source region out to fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 27 08:34:09 2012] Extracting stamp from image fullrun_mos2_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (207, 282) - (240, 315)
[Mon Feb 27 08:34:09 2012] XMMSAS bgd. selection expression = annulus(19392.056400, 25899.845000, 475.816014, 951.632027, X, Y)
[Mon Feb 27 08:34:09 2012] Writing fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1.gif
[Mon Feb 27 08:36:44 2012] Mean detx,y = (-4487.59, 1584.77) 
[Mon Feb 27 08:36:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 08:37:01 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 08:37:02 2012] Setting source spectrum file to fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 08:37:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 27 10:06:49 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:49 2012] Error reading totcts from fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 10:06:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:52 2012] Using photon index=1.80, rate=0.00989, arf fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 10:06:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:52 2012] Updating source flux to 1.5e-13
[Mon Feb 27 10:17:10 2012] Reading fit data from xmm0502020201/analysis//spectral/fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 27 10:17:10 2012] Spectral fit parameter nH value = 6.00379e+20
[Mon Feb 27 10:17:10 2012] Spectral fit parameter PhoIndex value = 2.89304
[Mon Feb 27 10:17:10 2012] Failed to get F(0.3-8.0) from xmm0502020201/analysis//spectral/fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 10:17:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:17:10 2012] Using Nh = 6e+20, photon index=2.89, rate=0.00989, arf fullrun_mos2_xmm0502020201_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 10:17:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:17:10 2012] Updating source flux to 1.1e-13