[Sat Feb 25 23:52:51 2012] Detection parameters:
  Position = (334.2, 343.4) = 1 37 32.24 -12 48 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.3 +/- 20.9
  Background counts = 133.1
  Rate = 0.006 +/- 0.0005

[Sat Feb 25 23:52:53 2012] Off-axis axis estimate = 4.16'
[Sun Feb 26 04:44:51 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 04:44:51 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Sun Feb 26 04:44:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.870
[Sun Feb 26 04:44:51 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.51"
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src12.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src12.csv
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src12.csv
[Sun Feb 26 06:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Feb 26 06:56:37 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Feb 26 09:48:27 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.783192 pixels away
[Sun Feb 26 09:48:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:27 2012] Assessing source extent using major
[Sun Feb 26 09:48:27 2012] Source does appear to be extended
[Sun Feb 26 09:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 17:49:04 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:49:04 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Sun Feb 26 17:49:04 2012] source mask rpix=2.0, npix_max = 24, mask sum = 21, frac = 0.870
[Sun Feb 26 17:49:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.51"
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src11.ximg exists
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Feb 26 20:35:00 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Feb 26 20:35:00 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Feb 27 01:26:50 2012] Source 5 is offset by 1.116335 and -1.978036 pixels which is larger than
2 X fitted extent = 4.168055 x 1.734504, not incorporating fit results
[Mon Feb 27 01:26:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:50 2012] Assessing source extent using major
[Mon Feb 27 01:26:50 2012] Source does appear to be extended
[Mon Feb 27 01:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 06:28:23 2012] XMMSAS src. selection expression = ellipse(29026.322266, 29825.839203, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing source region out to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src5_src.reg
[Mon Feb 27 06:28:23 2012] Extracting stamp from image fullrun_mos1_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (297, 306) - (372, 381)
[Mon Feb 27 06:28:23 2012] XMMSAS bgd. selection expression = annulus(29026.322266, 29825.839203, 1087.500000, 2175.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src5.gif
[Mon Feb 27 06:36:21 2012] Mean detx,y = (-6211.50, -2114.80) 
[Mon Feb 27 06:36:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 06:36:49 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 06:36:49 2012] Setting source spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Feb 27 06:36:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Feb 27 07:46:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 07:46:08 2012] rmf not generated due to insufficient counts
[Mon Feb 27 10:06:44 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:44 2012] Error reading totcts from fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Feb 27 10:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:47 2012] Using photon index=1.80, rate=0.00588, arf fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src5.arf
[Mon Feb 27 10:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:47 2012] Updating source flux to 9.8e-14
[Mon Feb 27 10:06:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting