[Sat Feb 25 23:52:52 2012] Detection parameters:
  Position = (326.7, 208.6) = 1 37 34.47 -12 58 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.6 +/- 22.0
  Background counts = 189.3
  Rate = 0.003 +/- 0.0005

[Sat Feb 25 23:52:53 2012] Off-axis axis estimate = 6.83'
[Sun Feb 26 04:44:51 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 04:44:51 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Sun Feb 26 04:44:51 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.754
[Sun Feb 26 04:44:51 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.84"
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src21.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src21.csv
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src21.csv
[Sun Feb 26 06:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 06:56:38 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Feb 26 06:56:38 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Feb 26 06:56:38 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Feb 26 09:48:27 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.430125 pixels away
[Sun Feb 26 09:48:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:27 2012] Assessing source extent using major
[Sun Feb 26 09:48:27 2012] Source does appear to be extended
[Sun Feb 26 09:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:48:27 2012] Source is confused with source 18
[Sun Feb 26 17:49:04 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:49:04 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Sun Feb 26 17:49:04 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.754
[Sun Feb 26 17:49:04 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.84"
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src20.ximg exists
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Feb 26 20:35:00 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Feb 26 20:35:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Feb 26 20:35:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sun Feb 26 20:35:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 01:26:50 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 18.320438 pixels away
[Mon Feb 27 01:26:50 2012] Spatial fit model total counts = 1258.590000, observed total counts = 1241.000000
[Mon Feb 27 01:26:50 2012] Offset between fit and detection position for source 30 = 8.416994 pixels
[Mon Feb 27 01:26:50 2012] 1320.501000 total counts/ 712.037000 bgd. counts: snr = 22.802560
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 8.416994 pixels
  Position = (325.9, 200.2) = 1 37 34.70 -12 59 18.8
  Extent = 19.7" x 15.7", rotation angle = 121
  Source counts = 608.5 +/- 36.3
  Background counts = 712.0
  Rate = 0.01 +/- 0.0006
[Mon Feb 27 01:26:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:50 2012] Assessing source extent using major
[Mon Feb 27 01:26:50 2012] Source does appear to be extended
[Mon Feb 27 01:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.25
[Mon Feb 27 06:28:23 2012] XMMSAS src. selection expression = ellipse(28305.571865, 17372.969228, 1180.962034, 944.220388, 121.003810, X, Y)
[Mon Feb 27 06:28:23 2012] Writing source region out to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src30_src.reg
[Mon Feb 27 06:28:23 2012] Extracting stamp from image fullrun_mos1_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (258, 132) - (394, 268)
[Mon Feb 27 06:28:23 2012] XMMSAS bgd. selection expression = annulus(28305.571865, 17372.969228, 1968.270057, 3936.540113, X, Y) && !ellipse(28588.574000, 17298.817200, 1628.192047, 1628.192047, 0.000000, X, Y) && !ellipse(28027.287400, 17310.806600, 1189.640034, 1189.640034, 0.000000, X, Y) && !ellipse(24912.200820, 20229.790020, 286.792808, 286.792808, 0.000000, X, Y) && !ellipse(27920.732000, 16142.022000, 1675.328048, 1675.328048, 0.000000, X, Y) && !ellipse(29040.422000, 17319.798000, 3303.232095, 3303.232095, 0.000000, X, Y) && !ellipse(29530.278687, 16918.558975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30083.506000, 17676.479400, 1651.616048, 1651.616048, 0.000000, X, Y) && !ellipse(29652.326000, 17653.410000, 1695.096049, 1695.096049, 0.000000, X, Y) && !ellipse(30113.997498, 16841.646759, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src30.gif
[Mon Feb 27 06:53:27 2012] Mean detx,y = (4979.19, -7803.73) 
[Mon Feb 27 06:53:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 06:54:07 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 06:54:08 2012] Setting source spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Feb 27 06:54:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Feb 27 10:06:45 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:45 2012] Error reading totcts from fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Feb 27 10:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:47 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src30.arf
[Mon Feb 27 10:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:48 2012] Updating source flux to 1.5e-13
[Mon Feb 27 10:06:57 2012] Flag c found in src. 30 procflags, skipping spectral fitting