[Sat Feb 25 23:52:51 2012] Detection parameters:
  Position = (255.4, 338.1) = 1 37 55.68 -12 49 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1502.0 +/- 53.4
  Background counts = 184.5
  Rate = 0.02 +/- 0.0008

[Sat Feb 25 23:52:53 2012] Off-axis axis estimate = 4.24'
[Sun Feb 26 04:44:51 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 04:44:51 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Sun Feb 26 04:44:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Sun Feb 26 04:44:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.55"
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 06:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 06:56:37 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 09:48:27 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun Feb 26 09:48:27 2012] Spatial fit model total counts = 2274.010000, observed total counts = 2271.000000
[Sun Feb 26 09:48:27 2012] Offset between fit and detection position for source 2 = 4.333209 pixels
[Sun Feb 26 09:48:27 2012] Warning, changing simple spatial fit ID from 1 to 26
[Sun Feb 26 09:48:27 2012] 2258.124000 total counts/ 1826.690000 bgd. counts: snr = 10.094433
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.333209 pixels
  Position = (259.6, 336.9) = 1 37 54.44 -12 49 24.3
  Extent = 14.4 (11.0-16.1)", rotation angle = 0
  Source counts = 431.4 +/- 47.5
  Background counts = 1826.7
  Rate = 0.007 +/- 0.0008
[Sun Feb 26 09:48:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:27 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 09:48:27 2012] Source does appear to be extended
[Sun Feb 26 09:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:48:27 2012] Source is confused with source 26
[Sun Feb 26 17:49:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:49:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 17:49:04 2012] Initial guess for spatial extent in simple fitting = 14.41"
[Sun Feb 26 17:49:04 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.963
[Sun Feb 26 17:49:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.41"
[Sun Feb 26 20:34:59 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 26 20:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 20:34:59 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 26 20:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 20:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 20:35:00 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 27 01:26:50 2012] Warning, spatial fit 1 centroid is now closest to src. 26
[Mon Feb 27 01:26:50 2012] Spatial fit model total counts = 2273.160000, observed total counts = 2271.000000
[Mon Feb 27 01:26:50 2012] Offset between fit and detection position for source 2 = 0.007034 pixels
[Mon Feb 27 01:26:50 2012] Warning, changing simple spatial fit ID from 1 to 25
[Mon Feb 27 01:26:50 2012] 2251.445000 total counts/ 1810.940000 bgd. counts: snr = 10.351393
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007034 pixels
  Position = (259.6, 336.9) = 1 37 54.44 -12 49 24.4
  Extent = 14.5 (11.3-16.1)", rotation angle = 0
  Source counts = 440.5 +/- 47.4
  Background counts = 1810.9
  Rate = 0.007 +/- 0.0008
[Mon Feb 27 01:26:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:50 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:26:50 2012] Source does appear to be extended
[Mon Feb 27 01:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 06:28:23 2012] XMMSAS src. selection expression = ellipse(22535.148000, 29261.786000, 872.178025, 872.178025, 0.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing source region out to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2_src.reg
[Mon Feb 27 06:28:23 2012] Extracting stamp from image fullrun_mos1_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (209, 287) - (310, 387)
[Mon Feb 27 06:28:23 2012] XMMSAS bgd. selection expression = annulus(22535.148000, 29261.786000, 1453.630042, 2907.260084, X, Y) && !ellipse(20338.508000, 33823.238000, 1680.216048, 1680.216048, 0.000000, X, Y) && !ellipse(22557.315800, 30635.409800, 466.003213, 466.003213, 0.000000, X, Y) && !ellipse(24759.893420, 28036.195600, 385.805611, 385.805611, 0.000000, X, Y) && !ellipse(25584.151200, 31624.551200, 404.649612, 404.649612, 0.000000, X, Y) && !ellipse(23210.321289, 28768.983551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22781.388031, 31269.782196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21211.895340, 30833.128113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21759.209717, 31392.962280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.600220, 31337.604919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.274000, 26090.022000, 668.207219, 668.207219, 0.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2.gif
[Mon Feb 27 06:28:31 2012] Mean detx,y = (-2663.42, 3345.44) 
[Mon Feb 27 06:28:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 06:28:59 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 06:28:59 2012] Setting source spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 27 06:28:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Feb 27 10:06:43 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:43 2012] Error reading totcts from fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Feb 27 10:06:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:46 2012] Using photon index=1.80, rate=0.00729, arf fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2.arf
[Mon Feb 27 10:06:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:46 2012] Updating source flux to 7.4e-14
[Mon Feb 27 10:06:57 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Feb 27 10:13:28 2012] Reading fit data from xmm0502020201/analysis//spectral/fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2_pl.csv
[Mon Feb 27 10:13:28 2012] Spectral fit parameter nH value = 8.64154e+20
[Mon Feb 27 10:13:28 2012] Spectral fit parameter PhoIndex value = 2.0336
[Mon Feb 27 10:13:28 2012] Failed to get F(0.3-8.0) from xmm0502020201/analysis//spectral/fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 10:13:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:13:28 2012] Using Nh = 8.6e+20, photon index=2.03, rate=0.00729, arf fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src2.arf
[Mon Feb 27 10:13:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:13:28 2012] Updating source flux to 7.3e-14