[Sat Feb 25 23:52:52 2012] Detection parameters:
  Position = (323.9, 198.9) = 1 37 35.30 -12 59 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 328.0 +/- 30.3
  Background counts = 181.3
  Rate = 0.008 +/- 0.0007

[Sat Feb 25 23:52:53 2012] Off-axis axis estimate = 7.45'
[Sun Feb 26 04:44:51 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 04:44:51 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Sun Feb 26 04:44:51 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.120
[Sun Feb 26 04:44:51 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.15"
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src6.csv
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Feb 26 06:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src6.csv
[Sun Feb 26 06:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb 26 06:56:37 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb 26 06:56:37 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb 26 09:48:27 2012] Spatial fit model total counts = 1916.260000, observed total counts = 1984.000000
[Sun Feb 26 09:48:27 2012] Offset between fit and detection position for source 17 = 1.368921 pixels
[Sun Feb 26 09:48:27 2012] 1713.015000 total counts/ 1098.970000 bgd. counts: snr = 18.522827
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.368921 pixels
  Position = (322.7, 199.5) = 1 37 35.66 -12 59 21.9
  Extent = 14.9 (13.5-17.8)", rotation angle = 0
  Source counts = 614.0 +/- 41.4
  Background counts = 1099.0
  Rate = 0.01 +/- 0.0007
[Sun Feb 26 09:48:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 09:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 09:48:27 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 09:48:27 2012] Source does appear to be extended
[Sun Feb 26 09:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 09:48:27 2012] Source is confused with source 18
[Sun Feb 26 17:49:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:49:04 2012] Initial guess for spatial extent in simple fitting = 14.87"
[Sun Feb 26 17:49:04 2012] source mask rpix=3.4, npix_max = 61, mask sum = 54, frac = 0.879
[Sun Feb 26 17:49:04 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.87"
[Sun Feb 26 20:34:59 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Feb 26 20:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src5.csv
[Sun Feb 26 20:34:59 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Feb 26 20:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src5.csv
[Sun Feb 26 20:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Feb 26 20:35:00 2012] fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Feb 26 20:35:00 2012] Fit fullrun_mos1_xmm0502020201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Feb 27 01:26:50 2012] Warning, spatial fit 5 centroid is now closest to src. 30
[Mon Feb 27 01:26:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 01:26:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 01:26:50 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 01:26:50 2012] Source does appear to be extended
[Mon Feb 27 01:26:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 06:28:23 2012] XMMSAS src. selection expression = ellipse(28027.287400, 17310.806600, 892.230026, 892.230026, 0.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing source region out to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src17_src.reg
[Mon Feb 27 06:28:23 2012] Extracting stamp from image fullrun_mos1_xmm0502020201_pi300-10000_cl_sm2.00.img.gz, (271, 148) - (374, 251)
[Mon Feb 27 06:28:23 2012] XMMSAS bgd. selection expression = annulus(28027.287400, 17310.806600, 1487.050043, 2974.100086, X, Y) && !ellipse(28588.574000, 17298.817200, 1628.192047, 1628.192047, 0.000000, X, Y) && !ellipse(24912.200820, 20229.790020, 286.792808, 286.792808, 0.000000, X, Y) && !ellipse(27920.732000, 16142.022000, 1675.328048, 1675.328048, 0.000000, X, Y) && !ellipse(29040.422000, 17319.798000, 3303.232095, 3303.232095, 0.000000, X, Y) && !ellipse(29530.278687, 16918.558975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.571865, 17372.969228, 1574.616045, 1258.960517, 121.003810, X, Y) && !ellipse(30083.506000, 17676.479400, 1651.616048, 1651.616048, 0.000000, X, Y) && !ellipse(29652.326000, 17653.410000, 1695.096049, 1695.096049, 0.000000, X, Y) && !ellipse(30113.997498, 16841.646759, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 06:28:23 2012] Writing fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src17.gif
[Mon Feb 27 06:32:35 2012] Mean detx,y = (5103.26, -7621.93) 
[Mon Feb 27 06:32:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 06:33:11 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 06:33:11 2012] Setting source spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 27 06:33:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Feb 27 10:06:44 2012] Updating aperture counts using extracted products
[Mon Feb 27 10:06:44 2012] Error reading totcts from fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 27 10:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 10:06:47 2012] Using photon index=1.80, rate=0.0102, arf fullrun_mos1_xmm0502020201_pi300-10000_pass1_cl_src17.arf
[Mon Feb 27 10:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 10:06:47 2012] Updating source flux to 1.6e-13
[Mon Feb 27 10:06:57 2012] Flag c found in src. 17 procflags, skipping spectral fitting