[Tue Mar 13 13:31:17 2012] Detection parameters:
  Position = (337.7, 251.9) = 1 37 26.47 -12 59 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.9 +/- 33.7
  Background counts = 480.5
  Rate = 0.005 +/- 0.0009

[Tue Mar 13 13:31:17 2012] Off-axis axis estimate = 4.41'
[Tue Mar 13 13:40:10 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 13:40:10 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Tue Mar 13 13:40:10 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012
[Tue Mar 13 13:40:10 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.63"
[Tue Mar 13 16:52:55 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src44.ximg exists
[Tue Mar 13 16:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src44.csv
[Tue Mar 13 16:52:55 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue Mar 13 16:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src44.csv
[Tue Mar 13 16:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 16:52:56 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue Mar 13 16:52:56 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Mar 13 16:52:56 2012] Fit fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Tue Mar 13 21:54:40 2012] Spatial fit model total counts = 1793.450000, observed total counts = 1672.000000
[Tue Mar 13 21:54:40 2012] Offset between fit and detection position for source 49 = 3.657275 pixels
[Tue Mar 13 21:54:40 2012] 1712.827000 total counts/ 1491.780000 bgd. counts: snr = 5.723112
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 3.657275 pixels
  Position = (341.4, 252.3) = 1 37 25.38 -12 59 55.1
  Extent = 17.3 (17.2-34.5)", rotation angle = 0
  Source counts = 221.0 +/- 41.4
  Background counts = 1491.8
  Rate = 0.008 +/- 0.001
[Tue Mar 13 21:54:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:40 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 21:54:40 2012] Source does appear to be extended
[Tue Mar 13 21:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:54:40 2012] Source is confused with source 48
[Tue Mar 13 21:55:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 21:55:32 2012] Initial guess for spatial extent in simple fitting = 17.27"
[Tue Mar 13 21:55:32 2012] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.013
[Tue Mar 13 21:55:32 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 17.27"
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src41.ximg exists
[Wed Mar 14 00:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src41.csv
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Mar 14 00:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src41.csv
[Wed Mar 14 00:24:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 00:24:54 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Mar 14 00:24:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed Mar 14 00:24:54 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Mar 14 00:24:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Wed Mar 14 00:24:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 05:41:35 2012] Spatial fit model total counts = 1358.670000, observed total counts = 3256.000000
[Wed Mar 14 05:41:35 2012] Poor agreement between spatial fit and data for source 49
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 14 05:41:35 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:35 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 05:41:35 2012] Source does appear to be extended
[Wed Mar 14 05:41:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 05:42:13 2012] XMMSAS src. selection expression = ellipse(29650.710000, 21898.594600, 1036.200030, 1036.200030, 0.000000, X, Y)
[Wed Mar 14 05:42:13 2012] Writing source region out to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src49_src.reg
[Wed Mar 14 05:42:13 2012] Extracting stamp from image fullrun_pn_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (282, 193) - (401, 312)
[Wed Mar 14 05:42:13 2012] XMMSAS bgd. selection expression = annulus(29650.710000, 21898.594600, 1727.000050, 3454.000099, X, Y) && !ellipse(27736.155914, 23936.283295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26966.871796, 22887.968872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.794922, 22490.149902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.669400, 21901.838000, 1333.896038, 1333.896038, 0.000000, X, Y) && !ellipse(26985.677368, 21458.220993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33215.254913, 18371.221085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33174.428528, 26125.819580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.488007, 25947.292755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.076294, 23360.590637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28547.854126, 23088.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33810.374420, 22050.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28663.910767, 21884.066452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30137.112183, 17910.128784, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 05:42:13 2012] Writing fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src49.gif
[Wed Mar 14 06:25:03 2012] Mean detx,y = (-6195.03, -98.95) 
[Wed Mar 14 06:25:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 06:25:45 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 06:25:45 2012] Setting source spectrum file to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Mar 14 06:25:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Mar 14 18:05:10 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:10 2012] Error reading totcts from fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Mar 14 18:05:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:13 2012] Using photon index=1.80, rate=0.00798, arf fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src49.arf
[Wed Mar 14 18:05:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:13 2012] Updating source flux to 2.7e-14
[Wed Mar 14 18:15:17 2012] Flag p found in src. 49 procflags, skipping spectral fitting
[Wed Mar 14 18:15:17 2012] Flag c found in src. 49 procflags, skipping spectral fitting