[Tue Mar 13 13:31:15 2012] Detection parameters:
  Position = (238.4, 400.3) = 1 37 56.00 -12 49 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1709.2 +/- 54.9
  Background counts = 360.9
  Rate = 0.03 +/- 0.0008

[Tue Mar 13 13:31:17 2012] Off-axis axis estimate = 8.57'
[Tue Mar 13 13:40:10 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 13:40:10 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Tue Mar 13 13:40:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.769
[Tue Mar 13 13:40:10 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.71"
[Tue Mar 13 16:52:54 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 13 16:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 16:52:54 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 13 16:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 16:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 16:52:55 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 13 16:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 13 16:52:55 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 13 16:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Mar 13 16:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 21:54:39 2012] Warning, spatial fit 2 centroid is now closest to src. 5
[Tue Mar 13 21:54:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:40 2012] Assessing source extent using major
[Tue Mar 13 21:54:40 2012] Source does appear to be extended
[Tue Mar 13 21:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:54:40 2012] Source is confused with source 5
[Tue Mar 13 21:55:32 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 21:55:32 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Tue Mar 13 21:55:32 2012] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.769
[Tue Mar 13 21:55:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.71"
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 14 00:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src2.csv
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 14 00:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src2.csv
[Wed Mar 14 00:24:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 14 00:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 14 00:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Mar 14 00:24:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 05:41:34 2012] Warning, spatial fit 2 centroid is now closest to src. 26
[Wed Mar 14 05:41:35 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:35 2012] Assessing source extent using major
[Wed Mar 14 05:41:35 2012] Source does appear to be extended
[Wed Mar 14 05:41:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 05:42:12 2012] Counts = 1709.233154, rescaling region sizes by 2.000000
[Wed Mar 14 05:42:12 2012] XMMSAS src. selection expression = ellipse(20696.020493, 34775.570496, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Mar 14 05:42:12 2012] Writing source region out to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 14 05:42:12 2012] Extracting stamp from image fullrun_pn_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (163, 325) - (313, 475)
[Wed Mar 14 05:42:12 2012] XMMSAS bgd. selection expression = annulus(20696.020493, 34775.570496, 4350.000000, 8700.000000, X, Y) && !ellipse(20971.297913, 36469.760620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20172.529694, 35478.436401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.927400, 35138.564000, 633.375218, 633.375218, 0.000000, X, Y) && !ellipse(21136.020000, 34714.018000, 1260.440036, 1260.440036, 0.000000, X, Y) && !ellipse(15345.829803, 33271.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15167.171555, 32498.338593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17997.407562, 31032.265930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19692.172501, 38789.664154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.843872, 38489.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20663.507004, 36910.113159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.126312, 36863.679352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21836.487000, 35945.548981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20417.659256, 36161.219666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21578.034500, 35419.882385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19917.599091, 35112.568054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21956.823547, 34403.858429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21858.973770, 31270.291962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20230.244520, 29832.236200, 412.921612, 412.921612, 0.000000, X, Y) && !ellipse(26919.850448, 29903.021400, 403.175212, 403.175212, 0.000000, X, Y) && !ellipse(29169.222400, 28002.846600, 411.676012, 411.676012, 0.000000, X, Y) && !ellipse(18555.222400, 26088.846600, 411.676012, 411.676012, 0.000000, X, Y) && !ellipse(12577.619800, 26074.082400, 483.096014, 324.331209, 74.862270, X, Y) && !ellipse(29378.488007, 25947.292755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19039.340622, 39387.003265, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 05:42:12 2012] Writing fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4.gif
[Wed Mar 14 05:45:23 2012] Mean detx,y = (7809.35, 6463.66) 
[Wed Mar 14 05:45:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 05:49:56 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 05:49:57 2012] Setting source spectrum file to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 14 05:49:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 14 06:33:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 06:33:18 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:05:07 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:07 2012] Error reading totcts from fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 14 18:05:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:11 2012] Using photon index=1.80, rate=0.026, arf fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4.arf
[Wed Mar 14 18:05:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:11 2012] Updating source flux to 1.1e-13
[Wed Mar 14 18:15:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 14 18:17:32 2012] xmm0502020101/analysis//spectral/fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete