[Tue Mar 13 13:31:16 2012] Detection parameters:
  Position = (336.0, 321.8) = 1 37 26.97 -12 54 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 544.7 +/- 38.0
  Background counts = 344.6
  Rate = 0.01 +/- 0.0009

[Tue Mar 13 13:31:17 2012] Off-axis axis estimate = 3.21'
[Tue Mar 13 13:40:10 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 13:40:10 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Tue Mar 13 13:40:10 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Tue Mar 13 13:40:10 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.03"
[Tue Mar 13 16:52:55 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src31.ximg exists
[Tue Mar 13 16:52:55 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Mar 13 16:52:55 2012] Fit fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_src31 appears to have run properly
[Tue Mar 13 16:52:56 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Mar 13 16:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Mar 13 16:52:56 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Mar 13 16:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Mar 13 16:52:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 21:54:40 2012] Spatial fit model total counts = 734.846000, observed total counts = 664.000000
[Tue Mar 13 21:54:40 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 13 21:54:40 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 14.421978 pixels away
[Tue Mar 13 21:54:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:40 2012] Assessing source extent using major
[Tue Mar 13 21:54:40 2012] Source does appear to be extended
[Tue Mar 13 21:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:55:32 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 21:55:32 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Tue Mar 13 21:55:32 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Tue Mar 13 21:55:32 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.03"
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src29.ximg exists
[Wed Mar 14 00:24:53 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Mar 14 00:24:53 2012] Fit fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_src29 appears to have run properly
[Wed Mar 14 00:24:54 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Mar 14 00:24:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Mar 14 00:24:54 2012] fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Mar 14 00:24:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Mar 14 00:24:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 05:41:35 2012] Spatial fit model total counts = 603.165000, observed total counts = 664.000000
[Wed Mar 14 05:41:35 2012] Offset between fit and detection position for source 36 = 0.614773 pixels
[Wed Mar 14 05:41:35 2012] 603.945100 total counts/ 550.514000 bgd. counts: snr = 2.277246
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.614773 pixels
  Position = (335.8, 322.4) = 1 37 27.03 -12 54 49.9
  Extent = 5.1" x 5.1", rotation angle = 0
  Source counts = 53.4 +/- 24.6
  Background counts = 550.5
  Rate = 0.002 +/- 0.0009
[Wed Mar 14 05:41:35 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:35 2012] Assessing source extent using major
[Wed Mar 14 05:41:35 2012] Source does appear to be extended
[Wed Mar 14 05:41:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 05:42:13 2012] XMMSAS src. selection expression = ellipse(29169.222400, 28002.846600, 308.757009, 308.757009, 0.000000, X, Y)
[Wed Mar 14 05:42:13 2012] Writing source region out to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src36_src.reg
[Wed Mar 14 05:42:13 2012] Extracting stamp from image fullrun_pn_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (318, 305) - (354, 340)
[Wed Mar 14 05:42:13 2012] XMMSAS bgd. selection expression = annulus(29169.222400, 28002.846600, 514.595015, 1029.190030, X, Y)
[Wed Mar 14 05:42:13 2012] Writing fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src36.gif
[Wed Mar 14 06:17:53 2012] Mean detx,y = (-2817.96, 4898.83) 
[Wed Mar 14 06:17:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 06:18:32 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 06:18:33 2012] Setting source spectrum file to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Mar 14 06:18:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Mar 14 06:52:41 2012] Not generating rmf since there are only 53 counts
[Wed Mar 14 06:52:41 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:05:09 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:09 2012] Error reading totcts from fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Mar 14 18:05:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:12 2012] Using photon index=1.80, rate=0.00193, arf fullrun_pn_xmm0502020101_pi300-10000_pass1_cl_src36.arf
[Wed Mar 14 18:05:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:12 2012] Updating source flux to 7.7e-15
[Wed Mar 14 18:15:17 2012] Flag p found in src. 36 procflags, skipping spectral fitting
[Wed Mar 14 18:15:17 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting