[Tue Mar 13 13:33:06 2012] Detection parameters:
  Position = (311.7, 258.0) = 1 37 34.21 -12 59 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 650.6 +/- 37.4
  Background counts = 138.0
  Rate = 0.01 +/- 0.0006

[Tue Mar 13 13:33:06 2012] Off-axis axis estimate = 3.09'
[Tue Mar 13 19:19:43 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 19:19:43 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Tue Mar 13 19:19:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Tue Mar 13 19:19:43 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.97"
[Tue Mar 13 21:54:20 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar 13 21:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src4.csv
[Tue Mar 13 21:54:20 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar 13 21:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src4.csv
[Tue Mar 13 21:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 21:54:21 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar 13 21:54:21 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar 13 21:54:21 2012] Fit fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Mar 13 21:55:07 2012] Spatial fit model total counts = 4125.650000, observed total counts = 4127.000000
[Tue Mar 13 21:55:07 2012] Offset between fit and detection position for source 38 = 0.922100 pixels
[Tue Mar 13 21:55:07 2012] 4038.744000 total counts/ 3258.440000 bgd. counts: snr = 13.669700
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.922100 pixels
  Position = (310.8, 258.2) = 1 37 34.48 -12 59 29.3
  Extent = 15.9 (15.9-31.9)", rotation angle = 0
  Source counts = 780.3 +/- 63.6
  Background counts = 3258.4
  Rate = 0.01 +/- 0.0009
[Tue Mar 13 21:55:07 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:55:07 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 21:55:07 2012] Source does appear to be extended
[Tue Mar 13 21:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:55:07 2012] Source is confused with source 37
[Wed Mar 14 03:18:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 03:18:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 03:18:46 2012] Initial guess for spatial extent in simple fitting = 15.94"
[Wed Mar 14 03:18:46 2012] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.922
[Wed Mar 14 03:18:46 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 15.94"
[Wed Mar 14 05:41:16 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar 14 05:41:16 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar 14 05:41:16 2012] Fit fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Mar 14 05:41:17 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar 14 05:41:17 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar 14 05:41:17 2012] Fit fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Mar 14 05:41:50 2012] Warning, spatial fit 4 centroid is now closest to src. 45
[Wed Mar 14 05:41:50 2012] Spatial fit model total counts = 6861.900000, observed total counts = 6853.000000
[Wed Mar 14 05:41:50 2012] Offset between fit and detection position for source 38 = 1.570262 pixels
[Wed Mar 14 05:41:50 2012] Warning, changing simple spatial fit ID from 4 to 7
[Wed Mar 14 05:41:50 2012] 6584.270000 total counts/ 3590.500000 bgd. counts: snr = 49.962132
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.570262 pixels
  Position = (310.7, 256.6) = 1 37 34.52 -12 59 36.1
  Extent = 32.4 (25.5-64.7)", rotation angle = 0
  Source counts = 2993.8 +/- 81.1
  Background counts = 3590.5
  Rate = 0.04 +/- 0.001
[Wed Mar 14 05:41:50 2012] Spatial fit model total counts = 6437.770000, observed total counts = 6433.000000
[Wed Mar 14 05:41:50 2012] Offset between fit and detection position for source 38 = 1.043340 pixels
[Wed Mar 14 05:41:50 2012] Warning, changing simple spatial fit ID from 7 to 28
[Wed Mar 14 05:41:50 2012] 6465.620000 total counts/ 3995.170000 bgd. counts: snr = 39.084849
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.043340 pixels
  Position = (310.7, 257.7) = 1 37 34.52 -12 59 31.5
  Extent = 34.0 (33.9-68.0)", rotation angle = 0
  Source counts = 2470.4 +/- 80.4
  Background counts = 3995.2
  Rate = 0.04 +/- 0.001
[Wed Mar 14 05:41:50 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:50 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 05:41:50 2012] Source does appear to be extended
[Wed Mar 14 05:41:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 08:53:10 2012] Counts = 2470.450000, rescaling region sizes by 2.000000
[Wed Mar 14 08:53:10 2012] XMMSAS src. selection expression = ellipse(26978.318000, 22370.485800, 4078.392117, 4078.392117, 0.000000, X, Y)
[Wed Mar 14 08:53:10 2012] Writing source region out to fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src38_src.reg
[Wed Mar 14 08:53:10 2012] Extracting stamp from image fullrun_mos2_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (76, 23) - (545, 492)
[Wed Mar 14 08:53:10 2012] XMMSAS bgd. selection expression = annulus(26978.318000, 22370.485800, 13594.640391, 27189.280782, X, Y) && !ellipse(20717.514282, 34536.331116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17989.710800, 31142.338800, 446.988013, 446.988013, 0.000000, X, Y) && !ellipse(26163.433380, 13094.528244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20925.585800, 35324.938000, 1766.384051, 1766.384051, 0.000000, X, Y) && !ellipse(23571.774323, 25580.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26859.392200, 21405.672000, 1174.296034, 1174.296034, 0.000000, X, Y) && !ellipse(27629.769560, 22409.118440, 1294.320037, 1294.320037, 0.000000, X, Y) && !ellipse(27365.405200, 9715.318400, 469.824814, 233.306407, -0.000000, X, Y) && !ellipse(27540.425045, 35147.015885, 898.248955, 340.277322, 6.103373, X, Y) && !ellipse(31037.707000, 40381.771400, 324.072809, 324.072809, 0.000000, X, Y) && !ellipse(12546.257600, 26075.624200, 375.857611, 375.857611, 0.000000, X, Y) && !ellipse(18385.134766, 21690.493576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33173.228400, 26100.663000, 491.350414, 491.350414, 0.000000, X, Y) && !ellipse(26922.153328, 29880.016800, 262.022408, 262.022408, 0.000000, X, Y) && !ellipse(20066.503820, 26220.736200, 342.302410, 342.302410, 0.000000, X, Y) && !ellipse(29197.766480, 27950.051700, 334.720010, 334.720010, 0.000000, X, Y) && !ellipse(19571.883743, 19580.016098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15106.466240, 32429.276200, 308.808809, 308.808809, 0.000000, X, Y) && !ellipse(21715.712600, 31285.373000, 486.847214, 486.847214, 0.000000, X, Y) && !ellipse(21794.400803, 35794.387543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19761.604000, 36921.502000, 1822.352052, 1822.352052, 0.000000, X, Y) && !ellipse(19108.794861, 12124.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31132.833900, 30218.116037, 720.866216, 240.643033, 57.595819, X, Y) && !ellipse(24171.146600, 36903.756000, 605.788817, 605.788817, 0.000000, X, Y) && !ellipse(29186.085940, 29221.218000, 451.203213, 361.932810, 65.044200, X, Y) && !ellipse(18866.139786, 39359.295380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.634000, 22120.934000, 1359.464039, 1359.464039, 0.000000, X, Y) && !ellipse(22407.411224, 34748.252899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.318000, 23828.586000, 1221.840035, 1221.840035, 0.000000, X, Y) && !ellipse(28784.534058, 22645.078827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25951.092102, 22983.324249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.955063, 33601.835144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28573.987579, 23316.203857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12143.616226, 17266.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27727.179260, 21040.815872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29376.146271, 22450.908569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.727600, 23978.365509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10527.319351, 34125.006012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37749.298889, 28310.728149, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 08:53:10 2012] Writing fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src38.gif
[Wed Mar 14 08:55:00 2012] Mean detx,y = (4010.90, 750.87) 
[Wed Mar 14 08:55:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 09:06:33 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 09:06:33 2012] Setting source spectrum file to fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 14 09:06:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Wed Mar 14 18:05:18 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:18 2012] Error reading totcts from fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Mar 14 18:05:21 2012] No arf file for this source, not re-computing flux
[Wed Mar 14 18:10:19 2012] Flag c found in src. 38 procflags, skipping spectral fitting
[Wed Mar 14 18:10:19 2012] Source 38 has no response, skipping