[Tue Mar 13 13:33:04 2012] Detection parameters:
  Position = (357.7, 464.6) = 1 37 20.55 -12 44 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.5 +/- 23.1
  Background counts = 55.8
  Rate = 0.004 +/- 0.0003

[Tue Mar 13 13:33:06 2012] Off-axis axis estimate = 12.79'
[Tue Mar 13 19:19:43 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 19:19:43 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Tue Mar 13 19:19:43 2012] source mask rpix=2.9, npix_max = 47, mask sum = 47, frac = 0.988
[Tue Mar 13 19:19:43 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.82"
[Tue Mar 13 21:54:21 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src12.ximg exists
[Tue Mar 13 21:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src12.csv
[Tue Mar 13 21:54:21 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Mar 13 21:54:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src12.csv
[Tue Mar 13 21:54:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 21:54:21 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Mar 13 21:54:21 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Mar 13 21:54:21 2012] Fit fullrun_mos2_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Mar 13 21:55:07 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.448733 pixels away
[Tue Mar 13 21:55:07 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:55:07 2012] Assessing source extent using major
[Tue Mar 13 21:55:07 2012] Source does appear to be extended
[Tue Mar 13 21:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 03:18:46 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 03:18:46 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Wed Mar 14 03:18:46 2012] source mask rpix=2.9, npix_max = 47, mask sum = 47, frac = 0.988
[Wed Mar 14 03:18:46 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.82"
[Wed Mar 14 05:41:16 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src11.ximg exists
[Wed Mar 14 05:41:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src11.csv
[Wed Mar 14 05:41:16 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Mar 14 05:41:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src11.csv
[Wed Mar 14 05:41:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 05:41:17 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Mar 14 05:41:17 2012] fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Mar 14 05:41:17 2012] Fit fullrun_mos2_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Mar 14 05:41:50 2012] Spatial fit model total counts = 931.101000, observed total counts = 876.000000
[Wed Mar 14 05:41:50 2012] Offset between fit and detection position for source 3 = 0.366755 pixels
[Wed Mar 14 05:41:50 2012] 930.507000 total counts/ 773.310000 bgd. counts: snr = 5.652850
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.366755 pixels
  Position = (357.3, 464.7) = 1 37 20.66 -12 44 31.0
  Extent = 4.1 (3.3-4.7)", rotation angle = 0
  Source counts = 157.2 +/- 30.5
  Background counts = 773.3
  Rate = 0.002 +/- 0.0005
[Wed Mar 14 05:41:50 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:50 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 05:41:50 2012] Source does appear to be extended
[Wed Mar 14 05:41:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 08:53:10 2012] XMMSAS src. selection expression = ellipse(31037.707000, 40381.771400, 243.054607, 243.054607, 0.000000, X, Y)
[Wed Mar 14 08:53:10 2012] Writing source region out to fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src3_src.reg
[Wed Mar 14 08:53:10 2012] Extracting stamp from image fullrun_mos2_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (343, 451) - (371, 479)
[Wed Mar 14 08:53:10 2012] XMMSAS bgd. selection expression = annulus(31037.707000, 40381.771400, 405.091012, 810.182023, X, Y)
[Wed Mar 14 08:53:10 2012] Writing fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src3.gif
[Wed Mar 14 09:09:55 2012] Mean detx,y = (-1835.19, -16657.64) 
[Wed Mar 14 09:09:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 09:10:08 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 09:10:08 2012] Setting source spectrum file to fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 14 09:10:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Mar 14 18:05:18 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:18 2012] Error reading totcts from fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Mar 14 18:05:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:21 2012] Using photon index=1.80, rate=0.00233, arf fullrun_mos2_xmm0502020101_pi300-10000_pass1_cl_src3.arf
[Wed Mar 14 18:05:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:21 2012] Updating source flux to 1.1e-13