[Tue Mar 13 13:32:07 2012] Detection parameters:
  Position = (256.5, 411.9) = 1 37 50.62 -12 48 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.7 +/- 15.4
  Background counts = 107.7
  Rate = 0.001 +/- 0.0002

[Tue Mar 13 13:32:08 2012] Off-axis axis estimate = 8.77'
[Tue Mar 13 16:52:56 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:52:56 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Tue Mar 13 16:52:56 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.813
[Tue Mar 13 16:52:56 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 10.81"
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src37.ximg exists
[Tue Mar 13 19:19:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src37.csv
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Mar 13 19:19:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src37.csv
[Tue Mar 13 19:19:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 19:19:43 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Mar 13 19:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Mar 13 19:19:43 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Mar 13 19:19:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Mar 13 19:19:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 21:54:53 2012] Warning, spatial fit 37 centroid is now closest to src. 13
[Tue Mar 13 21:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:53 2012] Assessing source extent using major
[Tue Mar 13 21:54:53 2012] Source does appear to be extended
[Tue Mar 13 21:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 00:24:55 2012] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 00:24:55 2012] Initial guess for spatial extent in simple fitting = 10.81"
[Wed Mar 14 00:24:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.813
[Wed Mar 14 00:24:55 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 10.81"
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src33.ximg exists
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Mar 14 03:18:45 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src33 appears to have run properly
[Wed Mar 14 03:18:46 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Mar 14 03:18:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed Mar 14 03:18:46 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Mar 14 03:18:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed Mar 14 03:18:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 05:41:42 2012] Source 9 is offset by -4.625768 and -7.447543 pixels which is larger than
2 X fitted extent = 6.302289 x 3.897754, not incorporating fit results
[Wed Mar 14 05:41:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:42 2012] Assessing source extent using major
[Wed Mar 14 05:41:42 2012] Source does appear to be extended
[Wed Mar 14 05:41:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 07:04:46 2012] XMMSAS src. selection expression = ellipse(22269.755920, 35786.159607, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing source region out to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src9_src.reg
[Wed Mar 14 07:04:46 2012] Extracting stamp from image fullrun_mos1_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (219, 374) - (294, 449)
[Wed Mar 14 07:04:46 2012] XMMSAS bgd. selection expression = annulus(22269.755920, 35786.159607, 1087.500000, 2175.000000, X, Y) && !ellipse(20788.320200, 34591.454800, 2021.640058, 2021.640058, 0.000000, X, Y) && !ellipse(20259.671738, 34598.803955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.913147, 35625.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20241.431686, 35187.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21021.004044, 35879.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18903.407435, 39289.800750, 1482.280043, 1482.280043, 5.831625, X, Y) && !ellipse(20466.213104, 36743.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18829.222086, 39429.815000, 1657.912048, 1657.912048, 0.000000, X, Y) && !ellipse(18905.952000, 39443.976000, 2092.488060, 1425.104041, 217.480000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src9.gif
[Wed Mar 14 07:42:07 2012] Mean detx,y = (-8011.60, 6972.80) 
[Wed Mar 14 07:42:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 07:42:26 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 07:42:26 2012] Setting source spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 14 07:42:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Mar 14 08:43:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 08:43:19 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:05:15 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:16 2012] Error reading totcts from fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 14 18:05:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:18 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src9.arf
[Wed Mar 14 18:05:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:18 2012] Updating source flux to 2.9e-14
[Wed Mar 14 18:05:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting