[Tue Mar 13 13:32:08 2012] Detection parameters: Position = (310.6, 245.3) = 1 37 34.53 -13 0 19.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 320.2 +/- 28.3 Background counts = 139.4 Rate = 0.007 +/- 0.0006 [Tue Mar 13 13:32:08 2012] Off-axis axis estimate = 3.95' [Tue Mar 13 16:52:56 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting [Tue Mar 13 16:52:56 2012] Initial guess for spatial extent in simple fitting = 8.40" [Tue Mar 13 16:52:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.930 [Tue Mar 13 16:52:56 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.40" [Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src8.ximg exists [Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src8.csv [Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src8_1.ximg exists [Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src8.csv [Tue Mar 13 19:19:41 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Tue Mar 13 19:19:42 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Tue Mar 13 21:54:53 2012] Spatial fit model total counts = 2491.620000, observed total counts = 2471.000000 [Tue Mar 13 21:54:53 2012] Offset between fit and detection position for source 39 = 0.177883 pixels [Tue Mar 13 21:54:53 2012] 2568.281700 total counts/ 2509.770000 bgd. counts: snr = 1.167954 Spatial fit parameters: Offset between fit and detection position for source 39 = 0.177883 pixels Position = (310.7, 245.5) = 1 37 34.51 -13 0 24.7 Extent = 3.4 (2.3-4.6)", rotation angle = 0 Source counts = 58.5 +/- 50.7 Background counts = 2509.8 Rate = 0.0009 +/- 0.0007 Deleting source due to low Poisson probability