[Tue Mar 13 13:32:08 2012] Detection parameters:
  Position = (313.2, 258.0) = 1 37 33.77 -12 59 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 597.8 +/- 36.8
  Background counts = 153.3
  Rate = 0.01 +/- 0.0006

[Tue Mar 13 13:32:08 2012] Off-axis axis estimate = 3.12'
[Tue Mar 13 16:52:56 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:52:56 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Tue Mar 13 16:52:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Tue Mar 13 16:52:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.99"
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 19:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 13 19:19:42 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 13 21:54:53 2012] Spatial fit model total counts = 4227.960000, observed total counts = 4245.000000
[Tue Mar 13 21:54:53 2012] Offset between fit and detection position for source 32 = 1.416107 pixels
[Tue Mar 13 21:54:53 2012] 4210.049000 total counts/ 3441.580000 bgd. counts: snr = 13.099280
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.416107 pixels
  Position = (311.8, 258.0) = 1 37 34.19 -12 59 30.3
  Extent = 16.0 (15.9-32.0)", rotation angle = 0
  Source counts = 768.5 +/- 64.9
  Background counts = 3441.6
  Rate = 0.01 +/- 0.001
[Tue Mar 13 21:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:53 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 21:54:53 2012] Source does appear to be extended
[Tue Mar 13 21:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:54:53 2012] Source is confused with source 30
[Wed Mar 14 00:24:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 00:24:55 2012] Initial guess for spatial extent in simple fitting = 15.98"
[Wed Mar 14 00:24:55 2012] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.919
[Wed Mar 14 00:24:55 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 15.98"
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar 14 03:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src4.csv
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar 14 03:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src4.csv
[Wed Mar 14 03:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar 14 03:18:45 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Mar 14 05:41:42 2012] Warning, spatial fit 4 centroid is now closest to src. 31
[Wed Mar 14 05:41:42 2012] Spatial fit model total counts = 5390.860000, observed total counts = 5358.000000
[Wed Mar 14 05:41:42 2012] Offset between fit and detection position for source 32 = 1.803332 pixels
[Wed Mar 14 05:41:42 2012] Warning, changing simple spatial fit ID from 4 to 28
[Wed Mar 14 05:41:42 2012] 5421.180000 total counts/ 2750.270000 bgd. counts: snr = 50.929755
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.803332 pixels
  Position = (310.0, 257.6) = 1 37 34.72 -12 59 32.1
  Extent = 30.7 (30.7-61.4)", rotation angle = 0
  Source counts = 2670.9 +/- 73.6
  Background counts = 2750.3
  Rate = 0.04 +/- 0.001
[Wed Mar 14 05:41:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:42 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 05:41:42 2012] Source does appear to be extended
[Wed Mar 14 05:41:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 07:04:46 2012] Counts = 2670.910000, rescaling region sizes by 2.000000
[Wed Mar 14 07:04:46 2012] XMMSAS src. selection expression = ellipse(26921.830000, 22359.294000, 3686.232106, 3686.232106, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing source region out to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src32_src.reg
[Wed Mar 14 07:04:46 2012] Extracting stamp from image fullrun_mos1_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (98, 46) - (522, 469)
[Wed Mar 14 07:04:46 2012] XMMSAS bgd. selection expression = annulus(26921.830000, 22359.294000, 12287.440354, 24574.880707, X, Y) && !ellipse(20788.320200, 34591.454800, 2021.640058, 2021.640058, 0.000000, X, Y) && !ellipse(18003.577850, 31106.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26197.624847, 13112.526688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20259.671738, 34598.803955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.913147, 35625.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11352.473251, 25093.368958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27400.894745, 9727.265434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20241.431686, 35187.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.938540, 25509.921480, 327.114409, 327.114409, 0.000000, X, Y) && !ellipse(15321.857544, 33247.800262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33191.152557, 26123.045074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26931.285040, 29904.359200, 327.249609, 327.249609, 0.000000, X, Y) && !ellipse(26431.185120, 21591.306992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21021.004044, 35879.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15095.462720, 32409.221200, 426.120812, 426.120812, 0.000000, X, Y) && !ellipse(18398.182740, 21691.732000, 365.134411, 365.134411, 0.000000, X, Y) && !ellipse(12540.630722, 26052.187653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.835400, 29182.599000, 354.224810, 354.224810, 0.000000, X, Y) && !ellipse(20081.062400, 26223.321200, 261.841608, 261.841608, 0.000000, X, Y) && !ellipse(19134.524750, 12107.345871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.090698, 21969.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.961212, 31309.934204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18903.407435, 39289.800750, 1482.280043, 1482.280043, 5.831625, X, Y) && !ellipse(21745.994200, 31255.350800, 549.495216, 549.495216, 0.000000, X, Y) && !ellipse(26360.346000, 22608.640000, 1228.744035, 1228.744035, 0.000000, X, Y) && !ellipse(28007.348572, 21377.820068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.333557, 22571.085815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29306.472000, 21724.862000, 1365.680039, 1365.680039, 0.000000, X, Y) && !ellipse(20466.213104, 36743.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22269.755920, 35786.159607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18829.222086, 39429.815000, 1657.912048, 1657.912048, 0.000000, X, Y) && !ellipse(18905.952000, 39443.976000, 2092.488060, 1425.104041, 217.480000, X, Y) && !ellipse(37834.190796, 23293.747620, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src32.gif
[Wed Mar 14 07:16:06 2012] Mean detx,y = (988.26, -4061.01) 
[Wed Mar 14 07:16:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 07:28:16 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 07:28:16 2012] Setting source spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Mar 14 07:28:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Mar 14 18:05:14 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:14 2012] Error reading totcts from fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Mar 14 18:05:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:16 2012] Using photon index=1.80, rate=0.0394, arf fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src32.arf
[Wed Mar 14 18:05:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:16 2012] Updating source flux to 3.6e-13
[Wed Mar 14 18:05:25 2012] Flag c found in src. 32 procflags, skipping spectral fitting