[Tue Mar 13 13:32:06 2012] Detection parameters:
  Position = (239.0, 398.7) = 1 37 55.82 -12 49 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 929.4 +/- 40.2
  Background counts = 112.8
  Rate = 0.02 +/- 0.001

[Tue Mar 13 13:32:08 2012] Off-axis axis estimate = 8.45'
[Tue Mar 13 16:52:56 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:52:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 16:52:56 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Tue Mar 13 16:52:56 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.834
[Tue Mar 13 16:52:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.65"
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 19:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 19:19:42 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 21:54:53 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.597568 pixels away
[Tue Mar 13 21:54:53 2012] Spatial fit model total counts = 3227.290000, observed total counts = 3167.000000
[Tue Mar 13 21:54:53 2012] Offset between fit and detection position for source 2 = 2.804606 pixels
[Tue Mar 13 21:54:53 2012] Warning, changing simple spatial fit ID from 1 to 6
[Tue Mar 13 21:54:53 2012] 2820.883000 total counts/ 2025.660000 bgd. counts: snr = 17.668743
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.804606 pixels
  Position = (239.3, 395.9) = 1 37 55.74 -12 49 30.3
  Extent = 21.5 (12.3-43.0)", rotation angle = 0
  Source counts = 795.2 +/- 53.1
  Background counts = 2025.7
  Rate = 0.01 +/- 0.0008
[Tue Mar 13 21:54:53 2012] Spatial fit model total counts = 2050.230000, observed total counts = 1981.000000
[Tue Mar 13 21:54:53 2012] Offset between fit and detection position for source 2 = 2.442012 pixels
[Tue Mar 13 21:54:53 2012] Warning, changing simple spatial fit ID from 6 to 25
[Tue Mar 13 21:54:53 2012] 1959.777000 total counts/ 1427.340000 bgd. counts: snr = 14.093034
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.442012 pixels
  Position = (237.8, 397.8) = 1 37 56.20 -12 49 22.2
  Extent = 21.4 (21.3-21.4)", rotation angle = 0
  Source counts = 532.4 +/- 44.3
  Background counts = 1427.3
  Rate = 0.008 +/- 0.0007
[Tue Mar 13 21:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:53 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 21:54:53 2012] Source does appear to be extended
[Tue Mar 13 21:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:54:53 2012] Source is confused with source 13
[Tue Mar 13 21:54:53 2012] Source is confused with source 10
[Tue Mar 13 21:54:53 2012] Source is confused with source 12
[Tue Mar 13 21:54:53 2012] Source is confused with source 14
[Wed Mar 14 00:24:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 00:24:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 00:24:55 2012] Initial guess for spatial extent in simple fitting = 21.36"
[Wed Mar 14 00:24:55 2012] source mask rpix=4.9, npix_max = 117, mask sum = 97, frac = 0.828
[Wed Mar 14 00:24:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 21.36"
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 14 03:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 14 03:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src1.csv
[Wed Mar 14 03:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 14 03:18:45 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 14 05:41:42 2012] Spatial fit model total counts = 11918.300000, observed total counts = 11199.000000
[Wed Mar 14 05:41:42 2012] Offset between fit and detection position for source 2 = 1.781248 pixels
[Wed Mar 14 05:41:42 2012] 11749.310000 total counts/ 7718.670000 bgd. counts: snr = 45.877820
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.781248 pixels
  Position = (239.5, 398.2) = 1 37 55.69 -12 49 20.5
  Extent = 25.3 (24.2-27.3)", rotation angle = 0
  Source counts = 4030.6 +/- 108.4
  Background counts = 7718.7
  Rate = 0.06 +/- 0.002
[Wed Mar 14 05:41:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:42 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 05:41:42 2012] Source does appear to be extended
[Wed Mar 14 05:41:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 07:04:46 2012] Counts = 4030.640000, rescaling region sizes by 2.000000
[Wed Mar 14 07:04:46 2012] XMMSAS src. selection expression = ellipse(20788.320200, 34591.454800, 3032.460087, 3032.460087, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing source region out to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 14 07:04:46 2012] Extracting stamp from image fullrun_mos1_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (65, 224) - (414, 572)
[Wed Mar 14 07:04:46 2012] XMMSAS bgd. selection expression = annulus(20788.320200, 34591.454800, 10108.200291, 20216.400582, X, Y) && !ellipse(18003.577850, 31106.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.830000, 22359.294000, 2457.488071, 2457.488071, 0.000000, X, Y) && !ellipse(20259.671738, 34598.803955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.913147, 35625.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11352.473251, 25093.368958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20241.431686, 35187.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.938540, 25509.921480, 327.114409, 327.114409, 0.000000, X, Y) && !ellipse(15321.857544, 33247.800262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33191.152557, 26123.045074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26931.285040, 29904.359200, 327.249609, 327.249609, 0.000000, X, Y) && !ellipse(26431.185120, 21591.306992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21021.004044, 35879.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15095.462720, 32409.221200, 426.120812, 426.120812, 0.000000, X, Y) && !ellipse(18398.182740, 21691.732000, 365.134411, 365.134411, 0.000000, X, Y) && !ellipse(12540.630722, 26052.187653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29223.835400, 29182.599000, 354.224810, 354.224810, 0.000000, X, Y) && !ellipse(20081.062400, 26223.321200, 261.841608, 261.841608, 0.000000, X, Y) && !ellipse(28248.090698, 21969.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.961212, 31309.934204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18903.407435, 39289.800750, 1482.280043, 1482.280043, 5.831625, X, Y) && !ellipse(21745.994200, 31255.350800, 549.495216, 549.495216, 0.000000, X, Y) && !ellipse(26360.346000, 22608.640000, 1228.744035, 1228.744035, 0.000000, X, Y) && !ellipse(28007.348572, 21377.820068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.333557, 22571.085815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29306.472000, 21724.862000, 1365.680039, 1365.680039, 0.000000, X, Y) && !ellipse(20466.213104, 36743.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22269.755920, 35786.159607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18829.222086, 39429.815000, 1657.912048, 1657.912048, 0.000000, X, Y) && !ellipse(18905.952000, 39443.976000, 2092.488060, 1425.104041, 217.480000, X, Y) && !ellipse(37834.190796, 23293.747620, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2.gif
[Wed Mar 14 07:05:00 2012] Mean detx,y = (-6225.41, 7734.96) 
[Wed Mar 14 07:05:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 07:12:18 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 07:12:18 2012] Setting source spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 14 07:12:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar 14 18:05:13 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:14 2012] Error reading totcts from fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 14 18:05:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:16 2012] Using photon index=1.80, rate=0.0595, arf fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2.arf
[Wed Mar 14 18:05:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:16 2012] Updating source flux to 7.4e-13
[Wed Mar 14 18:05:25 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Mar 14 18:10:19 2012] Reading fit data from xmm0502020101/analysis//spectral/fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Mar 14 18:10:19 2012] Spectral fit parameter nH value = 7.78278e+20
[Wed Mar 14 18:10:19 2012] Spectral fit parameter PhoIndex value = 1.91063
[Wed Mar 14 18:10:19 2012] Failed to get F(0.3-8.0) from xmm0502020101/analysis//spectral/fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Mar 14 18:10:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:10:19 2012] Using Nh = 7.8e+20, photon index=1.91, rate=0.0595, arf fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src2.arf
[Wed Mar 14 18:10:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:10:19 2012] Updating source flux to 7.7e-13