[Tue Mar 13 13:32:07 2012] Detection parameters:
  Position = (233.2, 405.0) = 1 37 57.56 -12 48 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.3 +/- 24.6
  Background counts = 118.8
  Rate = 0.006 +/- 0.0007

[Tue Mar 13 13:32:08 2012] Off-axis axis estimate = 9.06'
[Tue Mar 13 16:52:56 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:52:56 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Tue Mar 13 16:52:56 2012] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.823
[Tue Mar 13 16:52:56 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.96"
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src11.csv
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src11.csv
[Tue Mar 13 19:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Mar 13 19:19:42 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Mar 13 21:54:53 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.844244 pixels away
[Tue Mar 13 21:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:53 2012] Assessing source extent using major
[Tue Mar 13 21:54:53 2012] Source does appear to be extended
[Tue Mar 13 21:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:54:53 2012] Source is confused with source 2
[Wed Mar 14 00:24:55 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 00:24:55 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Mar 14 00:24:55 2012] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.823
[Wed Mar 14 00:24:55 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.96"
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Mar 14 03:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src9.csv
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Mar 14 03:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src9.csv
[Wed Mar 14 03:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Mar 14 03:18:45 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Mar 14 05:41:42 2012] Source 12 is offset by 5.627858 and -3.845131 pixels which is larger than
2 X fitted extent = 1.235218 x 1.235218, not incorporating fit results
[Wed Mar 14 05:41:42 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Wed Mar 14 05:41:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:42 2012] Assessing source extent using major
[Wed Mar 14 05:41:42 2012] Source does appear to be extended
[Wed Mar 14 05:41:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 07:04:46 2012] XMMSAS src. selection expression = ellipse(20241.431686, 35187.349609, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing source region out to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src12_src.reg
[Wed Mar 14 07:04:46 2012] Extracting stamp from image fullrun_mos1_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (196, 368) - (271, 443)
[Wed Mar 14 07:04:46 2012] XMMSAS bgd. selection expression = annulus(20241.431686, 35187.349609, 1087.500000, 2175.000000, X, Y) && !ellipse(20788.320200, 34591.454800, 2021.640058, 2021.640058, 0.000000, X, Y) && !ellipse(20259.671738, 34598.803955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.913147, 35625.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21021.004044, 35879.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20466.213104, 36743.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22269.755920, 35786.159607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18905.952000, 39443.976000, 2092.488060, 1425.104041, 217.480000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src12.gif
[Wed Mar 14 07:30:51 2012] Mean detx,y = (-6469.95, 8135.15) 
[Wed Mar 14 07:30:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 07:31:15 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 07:31:15 2012] Setting source spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Mar 14 07:31:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Mar 14 07:57:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 07:57:51 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:05:14 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:14 2012] Error reading totcts from fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Mar 14 18:05:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:17 2012] Using photon index=1.80, rate=0.00634, arf fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src12.arf
[Wed Mar 14 18:05:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:17 2012] Updating source flux to 1e-13
[Wed Mar 14 18:05:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting