[Tue Mar 13 13:32:07 2012] Detection parameters:
  Position = (236.5, 410.1) = 1 37 56.59 -12 48 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.2 +/- 24.0
  Background counts = 114.4
  Rate = 0.007 +/- 0.0007

[Tue Mar 13 13:32:08 2012] Off-axis axis estimate = 9.26'
[Tue Mar 13 16:52:56 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:52:56 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Tue Mar 13 16:52:56 2012] source mask rpix=2.5, npix_max = 37, mask sum = 35, frac = 0.946
[Tue Mar 13 16:52:56 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.06"
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 19:19:41 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Mar 13 19:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 19:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 13 19:19:42 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 13 19:19:42 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Mar 13 21:54:53 2012] Warning, spatial fit 7 centroid is now closest to src. 11
[Tue Mar 13 21:54:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 21:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 21:54:53 2012] Assessing source extent using major
[Tue Mar 13 21:54:53 2012] Source does appear to be extended
[Tue Mar 13 21:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 21:54:53 2012] Source is confused with source 2
[Wed Mar 14 00:24:55 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 00:24:55 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Wed Mar 14 00:24:55 2012] source mask rpix=2.5, npix_max = 37, mask sum = 35, frac = 0.946
[Wed Mar 14 00:24:55 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.06"
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Mar 14 03:18:44 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Mar 14 03:18:44 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Mar 14 03:18:45 2012] fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Mar 14 03:18:45 2012] Fit fullrun_mos1_xmm0502020101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Mar 14 05:41:42 2012] Source 10 is offset by -5.719504 and 4.840208 pixels which is larger than
2 X fitted extent = 1.270828 x 4.371315, not incorporating fit results
[Wed Mar 14 05:41:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 05:41:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 05:41:42 2012] Assessing source extent using major
[Wed Mar 14 05:41:42 2012] Source does appear to be extended
[Wed Mar 14 05:41:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 07:04:46 2012] XMMSAS src. selection expression = ellipse(20524.913147, 35625.894073, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing source region out to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src10_src.reg
[Wed Mar 14 07:04:46 2012] Extracting stamp from image fullrun_mos1_xmm0502020101_pi300-10000_cl_sm2.00.img.gz, (199, 373) - (274, 448)
[Wed Mar 14 07:04:46 2012] XMMSAS bgd. selection expression = annulus(20524.913147, 35625.894073, 1087.500000, 2175.000000, X, Y) && !ellipse(20788.320200, 34591.454800, 2021.640058, 2021.640058, 0.000000, X, Y) && !ellipse(20259.671738, 34598.803955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20241.431686, 35187.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21021.004044, 35879.462646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20466.213104, 36743.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22269.755920, 35786.159607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18829.222086, 39429.815000, 1657.912048, 1657.912048, 0.000000, X, Y) && !ellipse(18905.952000, 39443.976000, 2092.488060, 1425.104041, 217.480000, X, Y)
[Wed Mar 14 07:04:46 2012] Writing fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src10.gif
[Wed Mar 14 07:29:00 2012] Mean detx,y = (-6980.95, 8162.03) 
[Wed Mar 14 07:29:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 07:29:21 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 07:29:22 2012] Setting source spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 14 07:29:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Mar 14 07:57:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 07:57:17 2012] rmf not generated due to insufficient counts
[Wed Mar 14 18:05:14 2012] Updating aperture counts using extracted products
[Wed Mar 14 18:05:14 2012] Error reading totcts from fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 14 18:05:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 18:05:16 2012] Using photon index=1.80, rate=0.00706, arf fullrun_mos1_xmm0502020101_pi300-10000_pass1_cl_src10.arf
[Wed Mar 14 18:05:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 18:05:16 2012] Updating source flux to 1.2e-13
[Wed Mar 14 18:05:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting