[Thu Jun  6 10:13:14 2013] Detection parameters:
  Position = (278.5, 89.7) = 3 29 24.30 39 33 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.9 +/- 27.9
  Background counts = 49.9
  Rate = 0.02 +/- 0.001

[Thu Jun  6 10:13:14 2013] Off-axis axis estimate = 15.20'
[Thu Jun  6 10:15:42 2013] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 10:15:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 10:15:42 2013] Initial guess for spatial extent in simple fitting = 14.03"
[Thu Jun  6 10:15:42 2013] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.829
[Thu Jun  6 10:15:42 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 14.03"
[Thu Jun  6 10:28:20 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  6 10:28:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 10:28:20 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  6 10:28:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_src1.csv
[Thu Jun  6 10:28:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 10:28:20 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  6 10:28:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 10:28:20 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  6 10:28:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun  6 10:28:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501950201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 10:44:29 2013] Spatial fit model total counts = 1365.000000, observed total counts = 927.000000
[Thu Jun  6 10:44:29 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 10:44:29 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 10:44:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 10:44:29 2013] Assessing source extent using major
[Thu Jun  6 10:44:29 2013] Source does appear to be extended
[Thu Jun  6 10:44:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 10:44:37 2013] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 10:44:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  6 10:44:37 2013] Initial guess for spatial extent in simple fitting = 14.03"
[Thu Jun  6 10:44:37 2013] source mask rpix=3.2, npix_max = 55, mask sum = 46, frac = 0.829
[Thu Jun  6 10:44:37 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.03"
[Thu Jun  6 10:56:27 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  6 10:56:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_src1.csv
[Thu Jun  6 10:56:27 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  6 10:56:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_src1.csv
[Thu Jun  6 10:56:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 10:56:27 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  6 10:56:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun  6 10:56:27 2013] fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  6 10:56:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun  6 10:56:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501950201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 11:11:35 2013] Spatial fit model total counts = 1365.040000, observed total counts = 927.000000
[Thu Jun  6 11:11:35 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun  6 11:11:35 2013] Vigneting correction estimate = 1.000000
[Thu Jun  6 11:11:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  6 11:11:35 2013] Assessing source extent using major
[Thu Jun  6 11:11:35 2013] Source does appear to be extended
[Thu Jun  6 11:11:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  6 11:11:43 2013] XMMSAS src. selection expression = ellipse(24177.004181, 7758.341507, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  6 11:11:43 2013] Writing source region out to fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  6 11:11:43 2013] Extracting stamp from image fullrun_pn_xmm0501950201_pi300-10000_cl_sm2.00.img.gz, (241, 52) - (316, 127)
[Thu Jun  6 11:11:43 2013] XMMSAS bgd. selection expression = annulus(24177.004181, 7758.341507, 1087.500000, 2175.000000, X, Y)
[Thu Jun  6 11:11:43 2013] Writing fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1.gif
[Thu Jun  6 11:11:48 2013] Mean detx,y = (-5660.08, -16138.99) 
[Thu Jun  6 11:11:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  6 11:12:15 2013] Binned source spectrum to 10 counts/bin
[Thu Jun  6 11:12:15 2013] Setting source spectrum file to fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  6 11:12:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  6 11:18:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun  6 11:18:13 2013] rmf not generated due to insufficient counts
[Thu Jun  6 11:42:09 2013] Updating aperture counts using extracted products
[Thu Jun  6 11:42:09 2013] Total counts from fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 538.00
[Thu Jun  6 11:42:09 2013] Total counts from fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1020.00
[Thu Jun  6 11:42:09 2013] Got source and background scale factors 934485.000000, 3525126.000000
[Thu Jun  6 11:42:09 2013] User source parameters:
  Position = (278.5, 89.7) = 3 29 24.30 39 33 24.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 267.6 +/- 24.2
  Background aperture counts = 270.4
  Rate = 0.02 +/- 0.002

[Thu Jun  6 11:42:09 2013] Updating counts from extracted products
[Thu Jun  6 11:42:09 2013] Set source signif. to 267.61/16.44 = 16.27
[Thu Jun  6 11:42:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun  6 11:42:11 2013] Using photon index=1.80, rate=0.0239, arf fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1.arf
[Thu Jun  6 11:42:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  6 11:42:11 2013] Updating source flux to 3.2e-13
[Thu Jun  6 11:42:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun  6 11:42:20 2013] xmm0501950201/analysis//spectral/fullrun_pn_xmm0501950201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete