[Thu Dec 22 09:15:11 2011] Detection parameters:
  Position = (286.5, 282.1) = 21 6 56.76 38 45 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.2 +/- 33.2
  Background counts = 11.9
  Rate = 0.02 +/- 0.004

[Thu Dec 22 09:15:11 2011] Off-axis axis estimate = 1.47'
[Thu Dec 22 09:54:56 2011] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 09:54:56 2011] Initial guess for spatial extent in simple fitting = 7.16"
[Thu Dec 22 09:54:56 2011] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.651
[Thu Dec 22 09:54:56 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.16"
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src2.ximg exists
[Thu Dec 22 10:23:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src2.csv
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Dec 22 10:23:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src2.csv
[Thu Dec 22 10:23:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Dec 22 10:23:25 2011] Fit fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Dec 22 10:23:36 2011] Warning, spatial fit 2 centroid is now closest to src. 5
[Thu Dec 22 10:23:36 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 10:23:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 10:23:36 2011] Assessing source extent using major
[Thu Dec 22 10:23:36 2011] Source does appear to be extended
[Thu Dec 22 10:23:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 10:23:36 2011] Source is confused with source 2
[Thu Dec 22 11:06:49 2011] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 11:06:49 2011] Initial guess for spatial extent in simple fitting = 7.16"
[Thu Dec 22 11:06:49 2011] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.651
[Thu Dec 22 11:06:49 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.16"
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src3.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src3.csv
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src3.csv
[Thu Dec 22 11:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec 22 11:41:59 2011] Fit fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec 22 11:42:05 2011] Spatial fit model total counts = 821.433000, observed total counts = 743.000000
[Thu Dec 22 11:42:05 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Dec 22 11:42:05 2011] Warning, spatial fit 3 centroid is now closest to src. 2
[Thu Dec 22 11:42:05 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 127.747590 pixels away
[Thu Dec 22 11:42:05 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 145.699194 pixels away
[Thu Dec 22 11:42:05 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 11:42:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 11:42:05 2011] Assessing source extent using major
[Thu Dec 22 11:42:05 2011] Source does appear to be extended
[Thu Dec 22 11:42:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 13:25:45 2011] XMMSAS src. selection expression = ellipse(24881.152466, 24493.345612, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 22 13:25:45 2011] Writing source region out to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec 22 13:25:45 2011] Extracting stamp from image fullrun_mos2_xmm0501930701_pi300-10000_cl_sm2.00.img.gz, (249, 245) - (324, 320)
[Thu Dec 22 13:25:45 2011] XMMSAS bgd. selection expression = annulus(24881.152466, 24493.345612, 1087.500000, 2175.000000, X, Y) && !ellipse(24756.448800, 24795.372000, 1120.256032, 1120.256032, 0.000000, X, Y) && !ellipse(24579.200080, 23970.639200, 323.028009, 308.992009, 85.556526, X, Y) && !ellipse(24632.243000, 25285.536000, 616.688818, 616.688818, 0.000000, X, Y)
[Thu Dec 22 13:25:45 2011] Writing fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src3.gif
[Thu Dec 22 13:26:46 2011] Mean detx,y = (184.34, -13.44) 
[Thu Dec 22 13:26:49 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 13:27:08 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 13:27:09 2011] Setting source spectrum file to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 22 13:27:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Dec 22 13:43:58 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 22 13:43:58 2011] rmf not generated due to insufficient counts
[Thu Dec 22 13:44:39 2011] Updating aperture counts using extracted products
[Thu Dec 22 13:44:39 2011] Error reading totcts from fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 22 13:44:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 13:44:39 2011] Using photon index=1.80, rate=0.02, arf fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src3.arf
[Thu Dec 22 13:44:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 13:44:39 2011] Updating source flux to 2.6e-13
[Thu Dec 22 13:45:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting