[Thu Dec 22 09:15:11 2011] Detection parameters:
  Position = (286.7, 282.7) = 21 6 56.71 38 45 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.0 +/- 36.9
  Background counts = 9.6
  Rate = 0.05 +/- 0.004

[Thu Dec 22 09:15:11 2011] Off-axis axis estimate = 1.42'
[Thu Dec 22 09:54:56 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 09:54:56 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Dec 22 09:54:56 2011] source mask rpix=1.6, npix_max = 18, mask sum = 8, frac = 0.436
[Thu Dec 22 09:54:56 2011] Skipping simple spatial due to low active detector fraction
[Thu Dec 22 10:23:36 2011] Spatial fit model total counts = 225.527000, observed total counts = 225.000000
[Thu Dec 22 10:23:36 2011] Offset between fit and detection position for source 2 = 3.334271 pixels
[Thu Dec 22 10:23:36 2011] Warning, changing simple spatial fit ID from -1 to 4
[Thu Dec 22 10:23:36 2011] 223.950000 total counts/ 151.509000 bgd. counts: snr = 5.885254
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.334271 pixels
  Position = (285.0, 285.6) = 21 6 57.35 38 45 38.1
  Extent = 14.0 (14.0-28.0)" x 3.9 (3.0-7.6)", rotation angle = 82 (75-87) degrees
  Source counts = 72.4 +/- 15.0
  Background counts = 151.5
  Rate = 0.006 +/- 0.001
[Thu Dec 22 10:23:36 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 10:23:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 10:23:36 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 10:23:36 2011] Source does appear to be extended
[Thu Dec 22 10:23:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.85
[Thu Dec 22 10:23:36 2011] Source is asymmetric
[Thu Dec 22 10:23:36 2011] Source is confused with source 3
[Thu Dec 22 10:23:36 2011] Source is confused with source 5
[Thu Dec 22 11:06:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 11:06:49 2011] Initial guess for spatial extent in simple fitting = 8.95"
[Thu Dec 22 11:06:49 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Thu Dec 22 11:06:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.95"
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src1.csv
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src1.csv
[Thu Dec 22 11:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 22 11:41:59 2011] Fit fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec 22 11:42:05 2011] Warning, spatial fit 1 centroid is now closest to src. 5
[Thu Dec 22 11:42:05 2011] Source 2 is offset by -7.617280 and -4.023356 pixels which is larger than
2 X fitted extent = 0.823136 x 0.823136, not incorporating fit results
[Thu Dec 22 11:42:05 2011] Spatial fit model total counts = 227.169000, observed total counts = 225.000000
[Thu Dec 22 11:42:05 2011] Offset between fit and detection position for source 2 = 0.146531 pixels
[Thu Dec 22 11:42:05 2011] Warning, changing simple spatial fit ID from 1 to 5
[Thu Dec 22 11:42:05 2011] 229.769000 total counts/ 110.348000 bgd. counts: snr = 11.368377
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.146531 pixels
  Position = (285.1, 285.6) = 21 6 57.29 38 45 38.1
  Extent = 14.0 (10.7-28.0)", rotation angle = 0
  Source counts = 119.4 +/- 15.2
  Background counts = 110.3
  Rate = 0.01 +/- 0.001
[Thu Dec 22 11:42:05 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 11:42:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 11:42:05 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 11:42:05 2011] Source does appear to be extended
[Thu Dec 22 11:42:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 13:25:45 2011] XMMSAS src. selection expression = ellipse(24756.448800, 24795.372000, 840.192024, 840.192024, 0.000000, X, Y)
[Thu Dec 22 13:25:45 2011] Writing source region out to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec 22 13:25:45 2011] Extracting stamp from image fullrun_mos2_xmm0501930701_pi300-10000_cl_sm2.00.img.gz, (237, 237) - (333, 334)
[Thu Dec 22 13:25:45 2011] XMMSAS bgd. selection expression = annulus(24756.448800, 24795.372000, 1400.320040, 2800.640081, X, Y) && !ellipse(24579.200080, 23970.639200, 323.028009, 308.992009, 85.556526, X, Y) && !ellipse(24881.152466, 24493.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.243000, 25285.536000, 616.688818, 616.688818, 0.000000, X, Y)
[Thu Dec 22 13:25:45 2011] Writing fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2.gif
[Thu Dec 22 13:25:50 2011] Mean detx,y = (166.18, -161.94) 
[Thu Dec 22 13:25:52 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 13:26:18 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 13:26:18 2011] Setting source spectrum file to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec 22 13:26:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec 22 13:44:39 2011] Updating aperture counts using extracted products
[Thu Dec 22 13:44:39 2011] Error reading totcts from fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec 22 13:44:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 13:44:39 2011] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2.arf
[Thu Dec 22 13:44:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 13:44:39 2011] Updating source flux to 1.3e-13
[Thu Dec 22 13:45:05 2011] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Dec 22 13:45:05 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Dec 22 13:45:56 2011] Reading fit data from xmm0501930701/analysis//spectral/fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2_pl.csv
[Thu Dec 22 13:45:56 2011] Spectral fit parameter nH value = 2.28174e+21
[Thu Dec 22 13:45:56 2011] Spectral fit parameter PhoIndex value = 5.37386
[Thu Dec 22 13:45:56 2011] Failed to get F(0.3-8.0) from xmm0501930701/analysis//spectral/fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Dec 22 13:45:56 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 13:45:56 2011] Using Nh = 2.3e+21, photon index=5.37, rate=0.0105, arf fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src2.arf
[Thu Dec 22 13:45:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 13:45:56 2011] Updating source flux to 9.2e-14