[Thu Dec 22 09:15:11 2011] Detection parameters:
  Position = (283.0, 276.1) = 21 6 58.06 38 44 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.1 +/- 22.9
  Background counts = 11.9
  Rate = 0.03 +/- 0.002

[Thu Dec 22 09:15:11 2011] Off-axis axis estimate = 1.97'
[Thu Dec 22 09:54:56 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 09:54:56 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Thu Dec 22 09:54:56 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Thu Dec 22 09:54:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.41"
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 22 10:23:25 2011] Fit fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 22 10:23:25 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 22 10:23:25 2011] Fit fullrun_mos2_xmm0501930701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 22 10:23:36 2011] Spatial fit model total counts = 743.042000, observed total counts = 743.000000
[Thu Dec 22 10:23:36 2011] Offset between fit and detection position for source 1 = 0.033471 pixels
[Thu Dec 22 10:23:36 2011] 780.100000 total counts/ 598.797000 bgd. counts: snr = 7.409095
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033471 pixels
  Position = (283.1, 276.1) = 21 6 58.05 38 44 56.8
  Extent = 4.0" x 3.9", rotation angle = 86
  Source counts = 181.3 +/- 27.9
  Background counts = 598.8
  Rate = 0.02 +/- 0.002
[Thu Dec 22 10:23:36 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 10:23:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 10:23:36 2011] Assessing source extent using major
[Thu Dec 22 10:23:36 2011] Source does appear to be extended
[Thu Dec 22 10:23:36 2011] Computing asymmetry using major and minor axis, asym = 1.05
[Thu Dec 22 10:23:36 2011] Source is confused with source 3
[Thu Dec 22 11:06:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 11:06:49 2011] Initial guess for spatial extent in simple fitting = 3.95"
[Thu Dec 22 11:06:49 2011] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.504
[Thu Dec 22 11:06:49 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.95"
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src2.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src2.csv
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src2.csv
[Thu Dec 22 11:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Dec 22 11:41:59 2011] fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Dec 22 11:41:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Dec 22 11:41:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 11:42:05 2011] Warning, spatial fit 2 centroid is now closest to src. 3
[Thu Dec 22 11:42:05 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 11:42:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 11:42:05 2011] Assessing source extent using major
[Thu Dec 22 11:42:05 2011] Source does appear to be extended
[Thu Dec 22 11:42:05 2011] Computing asymmetry using major and minor axis, asym = 1.05
[Thu Dec 22 13:25:45 2011] XMMSAS src. selection expression = ellipse(24579.200080, 23970.639200, 242.271007, 231.744007, 85.556526, X, Y)
[Thu Dec 22 13:25:45 2011] Writing source region out to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec 22 13:25:45 2011] Extracting stamp from image fullrun_mos2_xmm0501930701_pi300-10000_cl_sm2.00.img.gz, (269, 262) - (297, 290)
[Thu Dec 22 13:25:45 2011] XMMSAS bgd. selection expression = annulus(24579.200080, 23970.639200, 403.785012, 807.570023, X, Y) && !ellipse(24756.448800, 24795.372000, 1120.256032, 1120.256032, 0.000000, X, Y) && !ellipse(24881.152466, 24493.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.243000, 25285.536000, 616.688818, 616.688818, 0.000000, X, Y)
[Thu Dec 22 13:25:45 2011] Writing fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src1.gif
[Thu Dec 22 13:26:24 2011] Mean detx,y = (-8.33, 399.57) 
[Thu Dec 22 13:26:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 13:26:40 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 13:26:41 2011] Setting source spectrum file to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 22 13:26:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec 22 13:44:39 2011] Updating aperture counts using extracted products
[Thu Dec 22 13:44:39 2011] Error reading totcts from fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 22 13:44:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 13:44:39 2011] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0501930701_pi300-10000_pass1_cl_src1.arf
[Thu Dec 22 13:44:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 13:44:39 2011] Updating source flux to 3.1e-13
[Thu Dec 22 13:45:05 2011] Flag c found in src. 1 procflags, skipping spectral fitting