[Wed Mar 28 09:49:16 2012] Detection parameters:
  Position = (313.3, 330.4) = 21 6 57.69 38 46 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 13.0
  Background counts = 16.4
  Rate = 0.01 +/- 0.002

[Wed Mar 28 09:49:17 2012] Off-axis axis estimate = 2.56'
[Wed Mar 28 09:51:53 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 09:51:53 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Wed Mar 28 09:51:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.872
[Wed Mar 28 09:51:53 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.71"
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Mar 28 10:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src11.csv
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Mar 28 10:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src11.csv
[Wed Mar 28 10:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Mar 28 10:35:03 2012] Fit fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Mar 28 11:24:36 2012] Spatial fit model total counts = 356.864000, observed total counts = 326.000000
[Wed Mar 28 11:24:36 2012] Offset between fit and detection position for source 11 = 2.453559 pixels
[Wed Mar 28 11:24:36 2012] 337.822000 total counts/ 177.085000 bgd. counts: snr = 12.078833
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.453559 pixels
  Position = (312.5, 328.1) = 21 6 58.00 38 46 0.4
  Extent = 5.2 (4.9-5.3)", rotation angle = 0
  Source counts = 160.7 +/- 18.4
  Background counts = 177.1
  Rate = 0.01 +/- 0.001
[Wed Mar 28 11:24:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:24:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:24:36 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:24:36 2012] Source does appear to be extended
[Wed Mar 28 11:24:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:24:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 11:24:52 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Wed Mar 28 11:24:52 2012] source mask rpix=1.2, npix_max = 11, mask sum = 1, frac = 0.087
[Wed Mar 28 11:24:52 2012] Skipping simple spatial due to low active detector fraction
[Wed Mar 28 13:02:38 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 13:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 13:02:38 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 13:02:38 2012] Source does appear to be extended
[Wed Mar 28 13:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:02:53 2012] XMMSAS src. selection expression = ellipse(27135.550000, 28499.826000, 311.089809, 311.089809, 0.000000, X, Y)
[Wed Mar 28 13:02:53 2012] Writing source region out to fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src11_src.reg
[Wed Mar 28 13:02:53 2012] Extracting stamp from image fullrun_pn_xmm0501930601_pi300-10000_cl_sm2.00.img.gz, (295, 310) - (330, 346)
[Wed Mar 28 13:02:53 2012] XMMSAS bgd. selection expression = annulus(27135.550000, 28499.826000, 518.483015, 1036.966030, X, Y) && !ellipse(27140.875600, 27190.226400, 403.289612, 403.289612, 0.000000, X, Y) && !ellipse(27438.923000, 27750.102800, 386.201611, 377.584011, 124.489396, X, Y)
[Wed Mar 28 13:02:53 2012] Writing fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src11.gif
[Wed Mar 28 13:10:18 2012] Mean detx,y = (-121.68, -1311.39) 
[Wed Mar 28 13:10:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 13:11:01 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 13:11:02 2012] Setting source spectrum file to fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 28 13:11:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Mar 28 13:55:45 2012] Updating aperture counts using extracted products
[Wed Mar 28 13:55:45 2012] Error reading totcts from fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Mar 28 13:55:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 13:55:46 2012] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src11.arf
[Wed Mar 28 13:55:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 13:55:46 2012] Updating source flux to 1e-13