[Wed Mar 28 09:49:16 2012] Detection parameters:
  Position = (312.7, 313.1) = 21 6 57.92 38 44 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3043.4 +/- 65.8
  Background counts = 17.2
  Rate = 0.3 +/- 0.006

[Wed Mar 28 09:49:17 2012] Off-axis axis estimate = 1.48'
[Wed Mar 28 09:51:53 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 09:51:53 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Wed Mar 28 09:51:53 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Wed Mar 28 09:51:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.17"
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 10:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 10:35:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 10:35:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 10:35:03 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 10:35:03 2012] Fit fullrun_pn_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 11:24:36 2012] Source 1 is offset by 6.280251 and -7.498421 pixels which is larger than
2 X fitted extent = 0.824097 x 0.824097, not incorporating fit results
[Wed Mar 28 11:24:36 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.449377 pixels away
[Wed Mar 28 11:24:36 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:24:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:24:36 2012] Assessing source extent using major
[Wed Mar 28 11:24:36 2012] Source does appear to be extended
[Wed Mar 28 11:24:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:24:36 2012] Source is confused with source 3
[Wed Mar 28 11:24:52 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 11:24:52 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Wed Mar 28 11:24:52 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Wed Mar 28 11:24:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.17"
[Wed Mar 28 12:00:29 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 12:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 12:00:29 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 12:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 12:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 12:00:29 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 12:00:29 2012] fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 12:00:29 2012] Fit fullrun_pn_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 13:02:38 2012] Spatial fit model total counts = 4318.740000, observed total counts = 4345.000000
[Wed Mar 28 13:02:38 2012] Offset between fit and detection position for source 1 = 0.166004 pixels
[Wed Mar 28 13:02:38 2012] 4527.660000 total counts/ 2783.930000 bgd. counts: snr = 33.048373
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.166004 pixels
  Position = (312.5, 313.1) = 21 6 57.98 38 44 54.9
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 1743.7 +/- 67.3
  Background counts = 2783.9
  Rate = 0.1 +/- 0.005
[Wed Mar 28 13:02:38 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 13:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 13:02:38 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 13:02:38 2012] Source does appear to be extended
[Wed Mar 28 13:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:02:53 2012] Counts = 1743.730000, rescaling region sizes by 2.000000
[Wed Mar 28 13:02:53 2012] XMMSAS src. selection expression = ellipse(27140.875600, 27190.226400, 604.934417, 604.934417, 0.000000, X, Y)
[Wed Mar 28 13:02:53 2012] Writing source region out to fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 28 13:02:53 2012] Extracting stamp from image fullrun_pn_xmm0501930601_pi300-10000_cl_sm2.00.img.gz, (278, 278) - (347, 348)
[Wed Mar 28 13:02:53 2012] XMMSAS bgd. selection expression = annulus(27140.875600, 27190.226400, 2016.448058, 4032.896116, X, Y) && !ellipse(27438.923000, 27750.102800, 386.201611, 377.584011, 124.489396, X, Y) && !ellipse(27135.550000, 28499.826000, 414.786412, 414.786412, 0.000000, X, Y) && !ellipse(24778.947113, 24446.537445, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:02:53 2012] Writing fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1.gif
[Wed Mar 28 13:03:12 2012] Mean detx,y = (38.07, -15.72) 
[Wed Mar 28 13:03:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 13:04:29 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 13:04:30 2012] Setting source spectrum file to fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 13:04:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 28 13:55:44 2012] Updating aperture counts using extracted products
[Wed Mar 28 13:55:44 2012] Error reading totcts from fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 13:55:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 13:55:45 2012] Using photon index=1.80, rate=0.134, arf fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 13:55:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 13:55:45 2012] Updating source flux to 4.5e-13
[Wed Mar 28 13:56:53 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Mar 28 13:56:53 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Mar 28 13:57:48 2012] Reading fit data from xmm0501930601/analysis//spectral/fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar 28 13:57:48 2012] Spectral fit parameter nH value = 5.35306e+21
[Wed Mar 28 13:57:48 2012] Spectral fit parameter PhoIndex value = 7.69641
[Wed Mar 28 13:57:48 2012] Failed to get F(0.3-8.0) from xmm0501930601/analysis//spectral/fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 13:57:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 13:57:48 2012] Using Nh = 5.4e+21, photon index=7.70, rate=0.134, arf fullrun_pn_xmm0501930601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 13:57:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 13:57:48 2012] Updating source flux to 2.4e-13