[Wed Mar 28 09:50:19 2012] Detection parameters:
  Position = (312.6, 313.1) = 21 6 57.95 38 44 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 788.1 +/- 33.4
  Background counts = 6.5
  Rate = 0.06 +/- 0.002

[Wed Mar 28 09:50:20 2012] Off-axis axis estimate = 1.48'
[Wed Mar 28 11:00:16 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 11:00:16 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Wed Mar 28 11:00:16 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.084
[Wed Mar 28 11:00:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.17"
[Wed Mar 28 11:24:29 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 11:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 11:24:29 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 11:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 11:24:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:24:29 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 11:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar 28 11:24:29 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 11:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Mar 28 11:24:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:24:42 2012] Source 1 is offset by -6.989768 and 5.682303 pixels which is larger than
2 X fitted extent = 0.823839 x 0.823839, not incorporating fit results
[Wed Mar 28 11:24:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:24:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:24:42 2012] Assessing source extent using major
[Wed Mar 28 11:24:42 2012] Source does appear to be extended
[Wed Mar 28 11:24:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:24:42 2012] Source is confused with source 4
[Wed Mar 28 12:32:29 2012] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 12:32:29 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Wed Mar 28 12:32:29 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.084
[Wed Mar 28 12:32:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.17"
[Wed Mar 28 13:02:30 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 13:02:30 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 13:02:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 13:02:30 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar 28 13:02:30 2012] fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Mar 28 13:02:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 13:02:44 2012] Spatial fit model total counts = 1323.210000, observed total counts = 1138.000000
[Wed Mar 28 13:02:44 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 28 13:02:44 2012] Spatial fit model total counts = 1399.490000, observed total counts = 1099.000000
[Wed Mar 28 13:02:44 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Mar 28 13:02:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 13:02:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 13:02:44 2012] Assessing source extent using major
[Wed Mar 28 13:02:44 2012] Source does appear to be extended
[Wed Mar 28 13:02:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:50:34 2012] XMMSAS src. selection expression = ellipse(27147.780182, 27190.470398, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:50:34 2012] Writing source region out to fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 28 13:50:34 2012] Extracting stamp from image fullrun_mos2_xmm0501930601_pi300-10000_cl_sm2.00.img.gz, (275, 276) - (350, 351)
[Wed Mar 28 13:50:34 2012] XMMSAS bgd. selection expression = annulus(27147.780182, 27190.470398, 1087.500000, 2175.000000, X, Y) && !ellipse(27442.443298, 27713.962524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.656740, 28543.437800, 378.613611, 378.613611, 0.000000, X, Y)
[Wed Mar 28 13:50:34 2012] Writing fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1.gif
[Wed Mar 28 13:50:37 2012] Mean detx,y = (93.12, -72.51) 
[Wed Mar 28 13:50:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 13:50:55 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 13:50:55 2012] Setting source spectrum file to fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 13:50:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 28 13:53:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 13:53:51 2012] rmf not generated due to insufficient counts
[Wed Mar 28 13:55:47 2012] Updating aperture counts using extracted products
[Wed Mar 28 13:55:47 2012] Error reading totcts from fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 13:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 13:55:47 2012] Using photon index=1.80, rate=0.0558, arf fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 13:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 13:55:47 2012] Updating source flux to 7.1e-13
[Wed Mar 28 13:56:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 28 13:56:53 2012] xmm0501930601/analysis//spectral/fullrun_mos2_xmm0501930601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete