[Wed Mar 28 09:49:48 2012] Detection parameters:
  Position = (312.4, 313.1) = 21 6 58.01 38 44 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 874.1 +/- 35.4
  Background counts = 6.3
  Rate = 0.06 +/- 0.003

[Wed Mar 28 09:49:48 2012] Off-axis axis estimate = 1.47'
[Wed Mar 28 10:35:03 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:35:03 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Wed Mar 28 10:35:03 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.085
[Wed Mar 28 10:35:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.16"
[Wed Mar 28 11:00:16 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 11:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 11:00:16 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 11:00:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 11:00:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:00:16 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 11:00:16 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 11:00:16 2012] Fit fullrun_mos1_xmm0501930601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 11:24:39 2012] Spatial fit model total counts = 1180.770000, observed total counts = 1161.000000
[Wed Mar 28 11:24:39 2012] Offset between fit and detection position for source 1 = 0.108843 pixels
[Wed Mar 28 11:24:39 2012] 1242.404000 total counts/ 738.260000 bgd. counts: snr = 18.554529
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.108843 pixels
  Position = (312.3, 313.0) = 21 6 58.05 38 44 54.7
  Extent = 4.7 (4.4-4.9)", rotation angle = 0
  Source counts = 504.1 +/- 35.2
  Background counts = 738.3
  Rate = 0.03 +/- 0.002
[Wed Mar 28 11:24:39 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:24:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:24:39 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:24:39 2012] Source does appear to be extended
[Wed Mar 28 11:24:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 12:00:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 12:00:30 2012] Initial guess for spatial extent in simple fitting = 4.72"
[Wed Mar 28 12:00:30 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.195
[Wed Mar 28 12:00:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.72"
[Wed Mar 28 12:32:29 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 12:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 12:32:29 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 12:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 12:32:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 12:32:29 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 12:32:29 2012] fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 12:32:29 2012] Fit fullrun_mos1_xmm0501930601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 13:02:41 2012] Spatial fit model total counts = 1183.780000, observed total counts = 1161.000000
[Wed Mar 28 13:02:41 2012] Offset between fit and detection position for source 1 = 0.004782 pixels
[Wed Mar 28 13:02:41 2012] 1240.777000 total counts/ 733.861000 bgd. counts: snr = 18.712383
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004782 pixels
  Position = (312.3, 313.0) = 21 6 58.05 38 44 54.7
  Extent = 4.7 (4.3-5.0)", rotation angle = 0
  Source counts = 506.9 +/- 35.2
  Background counts = 733.9
  Rate = 0.04 +/- 0.002
[Wed Mar 28 13:02:41 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 13:02:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 13:02:41 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 13:02:41 2012] Source does appear to be extended
[Wed Mar 28 13:02:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:31:19 2012] XMMSAS src. selection expression = ellipse(27124.820600, 27185.519800, 279.669008, 279.669008, 0.000000, X, Y)
[Wed Mar 28 13:31:19 2012] Writing source region out to fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 28 13:31:19 2012] Extracting stamp from image fullrun_mos1_xmm0501930601_pi300-10000_cl_sm2.00.img.gz, (296, 297) - (328, 329)
[Wed Mar 28 13:31:19 2012] XMMSAS bgd. selection expression = annulus(27124.820600, 27185.519800, 466.115013, 932.230027, X, Y) && !ellipse(27427.307500, 27740.759400, 306.572809, 306.572809, 0.000000, X, Y)
[Wed Mar 28 13:31:19 2012] Writing fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1.gif
[Wed Mar 28 13:31:23 2012] Mean detx,y = (1.08, -315.73) 
[Wed Mar 28 13:31:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 13:31:38 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 13:31:38 2012] Setting source spectrum file to fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 13:31:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar 28 13:55:46 2012] Updating aperture counts using extracted products
[Wed Mar 28 13:55:46 2012] Error reading totcts from fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 28 13:55:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 13:55:46 2012] Using photon index=1.80, rate=0.035, arf fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 13:55:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 13:55:46 2012] Updating source flux to 5.3e-13
[Wed Mar 28 13:56:52 2012] Reading fit data from xmm0501930601/analysis//spectral/fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar 28 13:56:52 2012] Spectral fit parameter nH value = 8.4719e+21
[Wed Mar 28 13:56:52 2012] Spectral fit parameter PhoIndex value = 9.5
[Wed Mar 28 13:56:52 2012] Failed to get F(0.3-8.0) from xmm0501930601/analysis//spectral/fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 13:56:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 13:56:52 2012] Using Nh = 8.5e+21, photon index=9.50, rate=0.035, arf fullrun_mos1_xmm0501930601_pi300-10000_pass1_cl_src1.arf
[Wed Mar 28 13:56:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 13:56:52 2012] Updating source flux to 3.3e-13