[Sat Dec 24 22:36:21 2011] Detection parameters:
  Position = (292.1, 275.8) = 9 27 46.75 -6 4 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1805.6 +/- 50.7
  Background counts = 16.1
  Rate = 0.1 +/- 0.004

[Sat Dec 24 22:36:23 2011] Off-axis axis estimate = 1.71'
[Sat Dec 24 22:39:28 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 22:39:28 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Dec 24 22:39:28 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Dec 24 22:39:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Dec 24 23:42:16 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Dec 24 23:42:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 23:42:16 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Dec 24 23:42:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 23:42:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 23:42:16 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Dec 24 23:42:16 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Dec 24 23:42:16 2011] Fit fullrun_pn_xmm0501930401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 00:41:58 2011] Spatial fit model total counts = 1787.330000, observed total counts = 1787.000000
[Sun Dec 25 00:41:58 2011] Offset between fit and detection position for source 1 = 0.154676 pixels
[Sun Dec 25 00:41:58 2011] 1782.406000 total counts/ 455.156000 bgd. counts: snr = 62.211776
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154676 pixels
  Position = (292.1, 275.6) = 9 27 46.77 -6 4 17.2
  Extent = 6.0 (5.7-6.3)", rotation angle = 0
  Source counts = 1327.2 +/- 42.2
  Background counts = 455.2
  Rate = 0.09 +/- 0.003
[Sun Dec 25 00:41:58 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 00:41:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 00:41:58 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 00:41:58 2011] Source does appear to be extended
[Sun Dec 25 00:41:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 00:42:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 00:42:19 2011] Initial guess for spatial extent in simple fitting = 5.98"
[Sun Dec 25 00:42:19 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.854
[Sun Dec 25 00:42:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.98"
[Sun Dec 25 01:41:30 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 25 01:41:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 01:41:30 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 25 01:41:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 25 01:41:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 01:41:30 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 25 01:41:30 2011] fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 25 01:41:30 2011] Fit fullrun_pn_xmm0501930401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 25 02:58:17 2011] Spatial fit model total counts = 1787.000000, observed total counts = 1787.000000
[Sun Dec 25 02:58:17 2011] Offset between fit and detection position for source 1 = 0.000420 pixels
[Sun Dec 25 02:58:17 2011] 1782.081000 total counts/ 453.221000 bgd. counts: snr = 62.420065
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000420 pixels
  Position = (292.1, 275.6) = 9 27 46.77 -6 4 17.2
  Extent = 6.0 (5.7-6.3)", rotation angle = 0
  Source counts = 1328.9 +/- 42.2
  Background counts = 453.2
  Rate = 0.09 +/- 0.003
[Sun Dec 25 02:58:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 02:58:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 02:58:17 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 02:58:17 2011] Source does appear to be extended
[Sun Dec 25 02:58:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 02:58:43 2011] Counts = 1328.860000, rescaling region sizes by 2.000000
[Sun Dec 25 02:58:43 2011] XMMSAS src. selection expression = ellipse(25362.112680, 23929.022600, 719.837529, 719.837529, 0.000000, X, Y)
[Sun Dec 25 02:58:43 2011] Writing source region out to fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 25 02:58:43 2011] Extracting stamp from image fullrun_pn_xmm0501930401_pi300-10000_cl_sm2.00.img.gz, (251, 234) - (333, 317)
[Sun Dec 25 02:58:43 2011] XMMSAS bgd. selection expression = annulus(25362.112680, 23929.022600, 2399.458431, 4798.916861, X, Y) && !ellipse(29956.955000, 28389.939740, 331.712010, 331.712010, 0.000000, X, Y) && !ellipse(23148.358215, 27632.463745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23806.350400, 23817.943200, 378.219211, 378.219211, 0.000000, X, Y) && !ellipse(24731.464200, 20438.826000, 1231.904035, 175.483205, 111.683968, X, Y) && !ellipse(30190.804840, 19948.624435, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 02:58:43 2011] Writing fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1.gif
[Sun Dec 25 02:59:12 2011] Mean detx,y = (39.99, -274.70) 
[Sun Dec 25 02:59:21 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 03:02:10 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 03:02:11 2011] Setting source spectrum file to fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 03:02:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 25 04:12:36 2011] Updating aperture counts using extracted products
[Sun Dec 25 04:12:37 2011] Error reading totcts from fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 25 04:12:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 04:12:39 2011] Using photon index=1.80, rate=0.0884, arf fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 04:12:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 04:12:39 2011] Updating source flux to 2.9e-13
[Sun Dec 25 04:15:03 2011] Reading fit data from xmm0501930401/analysis//spectral/fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 25 04:15:03 2011] Spectral fit parameter nH value = 9.27489e+21
[Sun Dec 25 04:15:03 2011] Spectral fit parameter PhoIndex value = 10.0
[Sun Dec 25 04:15:03 2011] Failed to get F(0.3-8.0) from xmm0501930401/analysis//spectral/fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 25 04:15:03 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 25 04:15:03 2011] Using Nh = 9.3e+21, photon index=10.00, rate=0.0884, arf fullrun_pn_xmm0501930401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 25 04:15:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 25 04:15:03 2011] Updating source flux to 1.5e-13