[Fri Apr  6 15:44:41 2012] Detection parameters:
  Position = (319.9, 224.6) = 8 9 54.35 -49 19 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1308.5 +/- 48.7
  Background counts = 195.3
  Rate = 0.02 +/- 0.0006

[Fri Apr  6 15:44:44 2012] Off-axis axis estimate = 5.57'
[Fri Apr  6 15:51:49 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:51:49 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Fri Apr  6 15:51:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.094
[Fri Apr  6 15:51:49 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.22"
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src63.ximg exists
[Fri Apr  6 17:38:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src63.csv
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri Apr  6 17:38:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src63.csv
[Fri Apr  6 17:38:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 17:38:16 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri Apr  6 17:38:16 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Apr  6 17:38:16 2012] Fit fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Apr  6 21:14:43 2012] Spatial fit model total counts = 3039.590000, observed total counts = 2990.000000
[Fri Apr  6 21:14:43 2012] Offset between fit and detection position for source 67 = 1.326249 pixels
[Fri Apr  6 21:14:43 2012] 3048.170000 total counts/ 1673.750000 bgd. counts: snr = 33.594963
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 1.326249 pixels
  Position = (318.7, 224.1) = 8 9 54.89 -49 19 24.6
  Extent = 8.8 (8.2-9.4)", rotation angle = 0
  Source counts = 1374.4 +/- 55.2
  Background counts = 1673.8
  Rate = 0.01 +/- 0.0005
[Fri Apr  6 21:14:44 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:44 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:14:44 2012] Source does appear to be extended
[Fri Apr  6 21:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 21:15:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 21:15:38 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Fri Apr  6 21:15:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Fri Apr  6 21:15:38 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 8.79"
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src63.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src63.csv
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src63.csv
[Fri Apr  6 23:40:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:40:36 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Apr  6 23:40:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Apr  6 23:40:36 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Apr  6 23:40:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri Apr  6 23:40:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:30 2012] Warning, spatial fit 63 centroid is now closest to src. 174
[Sat Apr  7 03:14:30 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:30 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:30 2012] Source does appear to be extended
[Sat Apr  7 03:14:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:15:30 2012] Counts = 1374.420000, rescaling region sizes by 2.000000
[Sat Apr  7 03:15:30 2012] XMMSAS src. selection expression = ellipse(27681.095000, 19447.185000, 1055.332558, 1055.332558, 0.000000, X, Y)
[Sat Apr  7 03:15:30 2012] Writing source region out to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src67_src.reg
[Sat Apr  7 03:15:30 2012] Extracting stamp from image fullrun_pn_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (258, 163) - (379, 285)
[Sat Apr  7 03:15:30 2012] XMMSAS bgd. selection expression = annulus(27681.095000, 19447.185000, 3517.775195, 7035.550390, X, Y) && !ellipse(29452.064178, 22912.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.991820, 25745.897000, 453.550413, 453.550413, 0.000000, X, Y) && !ellipse(25142.603821, 23118.964386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.340698, 22920.243408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21427.017761, 19699.512329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27474.176208, 15522.985306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.352722, 14135.338226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30405.275452, 14125.823929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.951599, 27018.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.476990, 25731.760132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26325.711426, 23813.477570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.047140, 23913.470000, 426.714412, 426.714412, 0.000000, X, Y) && !ellipse(23991.945984, 21939.786224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34088.567000, 21637.985600, 452.476813, 452.476813, 0.000000, X, Y) && !ellipse(20417.752182, 16930.214554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27360.341827, 16115.060822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30800.715515, 24644.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20540.066727, 22624.741302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.358673, 16682.765823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21711.056778, 15091.382416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29369.012207, 25393.928894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27959.974884, 20860.767715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30954.717834, 20326.882477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30875.454590, 17063.852798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.865784, 12282.224686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35030.902008, 12146.169037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.873383, 27157.343597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22657.557465, 25640.554565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32755.316223, 25284.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32114.198334, 25016.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.154205, 23705.773651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.788879, 23624.736847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30258.205414, 23108.938995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20937.961365, 22832.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.440857, 22278.597168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33973.172852, 20768.569168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28453.688202, 20469.023453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23213.600250, 19771.268478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22168.878082, 19623.020935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21293.183044, 18359.756668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24024.260345, 17809.485916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23390.908417, 16908.367645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21946.036163, 16928.378601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29856.794189, 16429.183975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24379.697083, 15816.528000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33538.008240, 15299.596451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21185.959686, 14305.864120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19938.932251, 14039.078812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.171936, 12489.123154, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:15:30 2012] Writing fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src67.gif
[Sat Apr  7 04:52:02 2012] Mean detx,y = (-128.16, -5145.99) 
[Sat Apr  7 04:52:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:53:04 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:53:04 2012] Setting source spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Apr  7 04:53:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sun Apr  8 04:47:06 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:06 2012] Error reading totcts from fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sun Apr  8 04:47:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:09 2012] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src67.arf
[Sun Apr  8 04:47:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:09 2012] Updating source flux to 4e-14