[Fri Apr  6 15:44:41 2012] Detection parameters:
  Position = (432.7, 305.0) = 8 9 4.28 -49 13 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 494.3 +/- 33.7
  Background counts = 184.7
  Rate = 0.004 +/- 0.0003

[Fri Apr  6 15:44:44 2012] Off-axis axis estimate = 9.75'
[Fri Apr  6 15:51:49 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:51:49 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Fri Apr  6 15:51:49 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Fri Apr  6 15:51:49 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.30"
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src53.ximg exists
[Fri Apr  6 17:38:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src53.csv
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Apr  6 17:38:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src53.csv
[Fri Apr  6 17:38:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Apr  6 17:38:15 2012] Fit fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri Apr  6 21:14:43 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.757507 pixels away
[Fri Apr  6 21:14:44 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:44 2012] Assessing source extent using major
[Fri Apr  6 21:14:44 2012] Source does appear to be extended
[Fri Apr  6 21:14:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 21:15:38 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 21:15:38 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Fri Apr  6 21:15:38 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Fri Apr  6 21:15:38 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 11.30"
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src53.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src53.csv
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src53.csv
[Fri Apr  6 23:40:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:40:36 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Apr  6 23:40:36 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Apr  6 23:40:36 2012] Fit fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Sat Apr  7 03:14:30 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.530676 pixels away
[Sat Apr  7 03:14:30 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:30 2012] Assessing source extent using major
[Sat Apr  7 03:14:30 2012] Source does appear to be extended
[Sat Apr  7 03:14:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:15:30 2012] XMMSAS src. selection expression = ellipse(37599.297699, 26483.566193, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Apr  7 03:15:30 2012] Writing source region out to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src55_src.reg
[Sat Apr  7 03:15:30 2012] Extracting stamp from image fullrun_pn_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (395, 267) - (470, 342)
[Sat Apr  7 03:15:30 2012] XMMSAS bgd. selection expression = annulus(37599.297699, 26483.566193, 1087.500000, 2175.000000, X, Y) && !ellipse(37782.165497, 24823.949860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36835.982086, 26653.636749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35690.939636, 26767.649017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39760.464996, 26570.027222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36275.019531, 25597.434235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35854.338104, 29475.356750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39928.045135, 26135.643188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37112.981293, 24039.155060, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:15:30 2012] Writing fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src55.gif
[Sat Apr  7 04:39:01 2012] Mean detx,y = (-11972.92, -2722.40) 
[Sat Apr  7 04:39:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 04:39:27 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 04:39:27 2012] Setting source spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Apr  7 04:39:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Apr  7 08:22:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 08:22:10 2012] rmf not generated due to insufficient counts
[Sun Apr  8 04:47:06 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:06 2012] Error reading totcts from fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun Apr  8 04:47:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:09 2012] Using photon index=1.80, rate=0.00407, arf fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src55.arf
[Sun Apr  8 04:47:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:09 2012] Updating source flux to 2.4e-14
[Sun Apr  8 04:58:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting