[Fri Apr  6 15:44:40 2012] Detection parameters:
  Position = (336.0, 311.3) = 8 9 47.24 -49 13 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6320.9 +/- 98.0
  Background counts = 188.7
  Rate = 0.07 +/- 0.001

[Fri Apr  6 15:44:44 2012] Off-axis axis estimate = 2.88'
[Fri Apr  6 15:51:49 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:51:49 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Fri Apr  6 15:51:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.938
[Fri Apr  6 15:51:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.87"
[Fri Apr  6 17:38:14 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Apr  6 17:38:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 17:38:14 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Apr  6 17:38:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 17:38:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Apr  6 17:38:15 2012] Fit fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Apr  6 21:14:43 2012] Spatial fit model total counts = 7353.810000, observed total counts = 6983.000000
[Fri Apr  6 21:14:43 2012] Offset between fit and detection position for source 4 = 0.245017 pixels
[Fri Apr  6 21:14:43 2012] 7271.080000 total counts/ 3029.520000 bgd. counts: snr = 77.061721
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.245017 pixels
  Position = (335.9, 311.5) = 8 9 47.30 -49 13 4.4
  Extent = 5.6 (5.4-5.7)", rotation angle = 0
  Source counts = 4241.6 +/- 85.3
  Background counts = 3029.5
  Rate = 0.04 +/- 0.0008
[Fri Apr  6 21:14:43 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:43 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:14:43 2012] Source does appear to be extended
[Fri Apr  6 21:14:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 21:15:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 21:15:38 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Fri Apr  6 21:15:38 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.947
[Fri Apr  6 21:15:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.57"
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src3.csv
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src3.csv
[Fri Apr  6 23:40:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Apr  6 23:40:35 2012] Fit fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Apr  7 03:14:30 2012] Spatial fit model total counts = 7354.020000, observed total counts = 6983.000000
[Sat Apr  7 03:14:30 2012] Offset between fit and detection position for source 4 = 0.000030 pixels
[Sat Apr  7 03:14:30 2012] 7271.270000 total counts/ 3029.960000 bgd. counts: snr = 77.051584
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000030 pixels
  Position = (335.9, 311.5) = 8 9 47.30 -49 13 4.4
  Extent = 5.6 (5.4-5.7)", rotation angle = 0
  Source counts = 4241.3 +/- 85.3
  Background counts = 3030.0
  Rate = 0.04 +/- 0.0008
[Sat Apr  7 03:14:30 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:30 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:30 2012] Source does appear to be extended
[Sat Apr  7 03:14:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:15:27 2012] Counts = 4241.310000, rescaling region sizes by 2.000000
[Sat Apr  7 03:15:27 2012] XMMSAS src. selection expression = ellipse(29171.350000, 27049.352800, 667.804819, 667.804819, 0.000000, X, Y)
[Sat Apr  7 03:15:27 2012] Writing source region out to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src4_src.reg
[Sat Apr  7 03:15:27 2012] Extracting stamp from image fullrun_pn_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (297, 273) - (374, 350)
[Sat Apr  7 03:15:27 2012] XMMSAS bgd. selection expression = annulus(29171.350000, 27049.352800, 2226.016064, 4452.032128, X, Y) && !ellipse(29452.064178, 22912.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29094.487840, 28843.591600, 441.435213, 441.435213, 0.000000, X, Y) && !ellipse(25078.969340, 28022.378000, 426.824812, 388.190411, 349.236900, X, Y) && !ellipse(25142.603821, 23118.964386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.340698, 22920.243408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.398560, 31190.691800, 388.140011, 388.140011, 0.000000, X, Y) && !ellipse(25239.520355, 29823.869171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33335.841920, 28452.677833, 480.115674, 356.713079, 35.882889, X, Y) && !ellipse(33094.936900, 27610.924800, 385.154411, 385.154411, 0.000000, X, Y) && !ellipse(31316.480000, 27153.672200, 447.068013, 447.068013, 0.000000, X, Y) && !ellipse(24286.951599, 27018.259888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.476990, 25731.760132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26325.711426, 23813.477570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.047140, 23913.470000, 426.714412, 426.714412, 0.000000, X, Y) && !ellipse(23991.945984, 21939.786224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26170.944458, 31805.346741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27144.517151, 30996.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33363.893657, 30753.057400, 470.304014, 326.760809, 59.229900, X, Y) && !ellipse(25276.020180, 27139.522600, 376.273611, 376.273611, 0.000000, X, Y) && !ellipse(30800.715515, 24644.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29369.012207, 25393.928894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27804.347687, 32319.896729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.772797, 31742.791595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26507.424286, 30756.164124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.986542, 29847.281219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32382.518250, 28205.865112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28929.942047, 28060.013733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28289.333923, 27922.021240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.873383, 27157.343597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32755.316223, 25284.523102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32114.198334, 25016.173981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.154205, 23705.773651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.788879, 23624.736847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30258.205414, 23108.938995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27518.440857, 22278.597168, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:15:27 2012] Writing fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src4.gif
[Sat Apr  7 03:21:49 2012] Mean detx,y = (-4498.01, 1196.43) 
[Sat Apr  7 03:21:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 03:22:37 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 03:22:37 2012] Setting source spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Apr  7 03:22:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Apr  8 04:47:05 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:05 2012] Error reading totcts from fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Apr  8 04:47:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:08 2012] Using photon index=1.80, rate=0.0387, arf fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src4.arf
[Sun Apr  8 04:47:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:08 2012] Updating source flux to 1.3e-13