[Fri Apr  6 15:44:40 2012] Detection parameters:
  Position = (442.0, 175.1) = 8 8 59.97 -49 22 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2042.6 +/- 55.9
  Background counts = 159.7
  Rate = 0.02 +/- 0.0005

[Fri Apr  6 15:44:44 2012] Off-axis axis estimate = 13.72'
[Fri Apr  6 15:51:49 2012] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:51:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 15:51:49 2012] Initial guess for spatial extent in simple fitting = 13.29"
[Fri Apr  6 15:51:49 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Fri Apr  6 15:51:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.29"
[Fri Apr  6 17:38:14 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Apr  6 17:38:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 17:38:14 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Apr  6 17:38:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 17:38:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Apr  6 17:38:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Apr  6 17:38:15 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Apr  6 17:38:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Apr  6 17:38:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:43 2012] Warning, spatial fit 1 centroid is now closest to src. 74
[Fri Apr  6 21:14:43 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.494592 pixels away
[Fri Apr  6 21:14:43 2012] Spatial fit model total counts = 4117.470000, observed total counts = 3932.000000
[Fri Apr  6 21:14:43 2012] Offset between fit and detection position for source 2 = 0.172762 pixels
[Fri Apr  6 21:14:43 2012] Warning, changing simple spatial fit ID from 1 to 70
[Fri Apr  6 21:14:43 2012] 4084.040000 total counts/ 2963.270000 bgd. counts: snr = 20.588793
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.172762 pixels
  Position = (441.8, 175.0) = 8 9 0.05 -49 22 56.9
  Extent = 5.7 (5.4-6.2)", rotation angle = 0
  Source counts = 1120.8 +/- 63.9
  Background counts = 2963.3
  Rate = 0.01 +/- 0.0006
[Fri Apr  6 21:14:43 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:14:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:14:43 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:14:43 2012] Source does appear to be extended
[Fri Apr  6 21:14:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 21:15:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 21:15:38 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Fri Apr  6 21:15:38 2012] source mask rpix=1.3, npix_max = 13, mask sum = 15, frac = 1.146
[Fri Apr  6 21:15:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.69"
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src1.csv
[Fri Apr  6 23:40:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Apr  6 23:40:35 2012] fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Apr  6 23:40:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Apr  6 23:40:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:30 2012] Warning, spatial fit 1 centroid is now closest to src. 74
[Sat Apr  7 03:14:30 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:30 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:30 2012] Source does appear to be extended
[Sat Apr  7 03:14:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 03:15:26 2012] Counts = 1120.770000, rescaling region sizes by 2.000000
[Sat Apr  7 03:15:26 2012] XMMSAS src. selection expression = ellipse(38389.270000, 15180.026000, 683.373620, 683.373620, 0.000000, X, Y)
[Sat Apr  7 03:15:26 2012] Writing source region out to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2_src.reg
[Sat Apr  7 03:15:26 2012] Extracting stamp from image fullrun_pn_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (403, 136) - (481, 214)
[Sat Apr  7 03:15:26 2012] XMMSAS bgd. selection expression = annulus(38389.270000, 15180.026000, 2277.912066, 4555.824131, X, Y) && !ellipse(38382.295044, 18056.136810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35844.020660, 11892.669495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43105.592400, 19441.675400, 500.900814, 500.900814, 0.000000, X, Y) && !ellipse(37010.303345, 19628.388077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38788.198600, 18548.606400, 353.105610, 353.105610, 0.000000, X, Y) && !ellipse(40533.160828, 18655.491089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36639.536469, 15509.792465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39205.755035, 14923.891220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37677.202000, 13186.838000, 2166.160062, 1816.200052, -0.000000, X, Y) && !ellipse(38354.252625, 11862.998215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36517.075897, 20487.493164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39284.787292, 13583.609863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35030.902008, 12146.169037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35881.286652, 11082.669174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33491.332825, 10709.334221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33538.008240, 15299.596451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39499.486237, 12988.761169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33069.695587, 11447.974655, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Apr  7 03:15:26 2012] Writing fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2.gif
[Sat Apr  7 03:18:46 2012] Mean detx,y = (-8255.72, -13386.78) 
[Sat Apr  7 03:18:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 03:19:27 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 03:19:28 2012] Setting source spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr  7 03:19:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Apr  8 04:47:05 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:05 2012] Error reading totcts from fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Apr  8 04:47:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:08 2012] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2.arf
[Sun Apr  8 04:47:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:08 2012] Updating source flux to 8.4e-14
[Sun Apr  8 05:03:22 2012] Reading fit data from xmm0501790101/analysis//spectral/fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Apr  8 05:03:22 2012] Spectral fit parameter nH value = 6.29791e+21
[Sun Apr  8 05:03:22 2012] Spectral fit parameter PhoIndex value = 6.34283
[Sun Apr  8 05:03:22 2012] Failed to get F(0.3-8.0) from xmm0501790101/analysis//spectral/fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Apr  8 05:03:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 05:03:22 2012] Using Nh = 6.3e+21, photon index=6.34, rate=0.0102, arf fullrun_pn_xmm0501790101_pi300-10000_pass1_cl_src2.arf
[Sun Apr  8 05:03:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 05:03:22 2012] Updating source flux to 4.8e-14