[Fri Apr  6 15:46:05 2012] Detection parameters:
  Position = (275.7, 296.8) = 8 10 14.03 -49 14 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.4 +/- 26.3
  Background counts = 117.0
  Rate = 0.002 +/- 0.0003

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 1.65'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Apr  6 19:33:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.585
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 7.26"
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src87.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src87.csv
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src87_1.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src87.csv
[Fri Apr  6 21:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Fri Apr  6 21:14:28 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Fri Apr  6 21:15:06 2012] Warning, spatial fit 87 centroid is now closest to src. 10
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 21:15:06 2012] Source is confused with source 10
[Sat Apr  7 01:21:29 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Apr  7 01:21:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.585
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 7.26"
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src85.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src85.csv
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src85_1.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src85.csv
[Sat Apr  7 03:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Sat Apr  7 03:14:13 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Sat Apr  7 03:14:54 2012] Spatial fit model total counts = 2346.350000, observed total counts = 2351.000000
[Sat Apr  7 03:14:54 2012] Offset between fit and detection position for source 92 = 3.095975 pixels
[Sat Apr  7 03:14:54 2012] 1520.444000 total counts/ 601.193000 bgd. counts: snr = 37.491011
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 3.095975 pixels
  Position = (278.7, 297.6) = 8 10 12.69 -49 14 5.0
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source counts = 919.3 +/- 39.0
  Background counts = 601.2
  Rate = 0.008 +/- 0.0003
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:26 2012] XMMSAS src. selection expression = ellipse(24196.806000, 25839.083400, 870.084025, 870.084025, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src92_src.reg
[Sun Apr  8 01:33:26 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (229, 248) - (329, 348)
[Sun Apr  8 01:33:26 2012] XMMSAS bgd. selection expression = annulus(24196.806000, 25839.083400, 1450.140042, 2900.280083, X, Y) && !ellipse(24225.268091, 25788.179287, 451.264446, 305.515702, 315.680166, X, Y) && !ellipse(25106.472437, 22809.412563, 446.702144, 273.968208, 34.589110, X, Y) && !ellipse(22136.244618, 28264.402200, 601.809617, 427.630412, 93.096080, X, Y) && !ellipse(25083.247000, 28028.152600, 358.964010, 358.964010, 0.000000, X, Y) && !ellipse(24283.091000, 27033.602800, 339.085610, 339.085610, 0.000000, X, Y) && !ellipse(24918.936188, 24006.195526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.370172, 23835.329569, 519.519740, 261.244842, 9.496879, X, Y) && !ellipse(22787.446000, 29688.600000, 1345.936039, 1345.936039, 0.000000, X, Y) && !ellipse(25265.593960, 27158.938400, 356.424810, 356.424810, 0.000000, X, Y) && !ellipse(24839.649048, 27168.513306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22665.477417, 25635.164856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21721.325104, 29137.814911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.814880, 23642.461823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20984.376587, 22757.442322, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src92.gif
[Sun Apr  8 01:54:32 2012] Mean detx,y = (-446.41, -2215.68) 
[Sun Apr  8 01:54:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:54:39 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:54:39 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sun Apr  8 01:54:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Sun Apr  8 04:47:16 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:16 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sun Apr  8 04:47:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:18 2012] Using photon index=1.80, rate=0.00782, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src92.arf
[Sun Apr  8 04:47:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:18 2012] Updating source flux to 8.9e-14
[Sun Apr  8 04:52:35 2012] Flag c found in src. 92 procflags, skipping spectral fitting