[Fri Apr  6 15:46:02 2012] Detection parameters:
  Position = (336.1, 311.3) = 8 9 47.20 -49 13 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2087.7 +/- 57.1
  Background counts = 106.8
  Rate = 0.02 +/- 0.0005

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 2.88'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Fri Apr  6 19:33:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.938
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.87"
[Fri Apr  6 21:14:26 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Apr  6 21:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 21:14:26 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Apr  6 21:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 21:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Apr  6 21:14:27 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Apr  6 21:15:05 2012] Spatial fit model total counts = 2466.330000, observed total counts = 2465.000000
[Fri Apr  6 21:15:05 2012] Offset between fit and detection position for source 9 = 0.187847 pixels
[Fri Apr  6 21:15:05 2012] 2457.590000 total counts/ 1113.360000 bgd. counts: snr = 40.286151
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.187847 pixels
  Position = (336.0, 311.4) = 8 9 47.26 -49 13 4.7
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1344.2 +/- 49.6
  Background counts = 1113.4
  Rate = 0.01 +/- 0.0004
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 5.10"
[Sat Apr  7 01:21:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.074
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.10"
[Sat Apr  7 03:14:11 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Apr  7 03:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src3.csv
[Sat Apr  7 03:14:11 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Apr  7 03:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src3.csv
[Sat Apr  7 03:14:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Apr  7 03:14:12 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Apr  7 03:14:53 2012] Spatial fit model total counts = 2465.000000, observed total counts = 2465.000000
[Sat Apr  7 03:14:53 2012] Offset between fit and detection position for source 9 = 0.001529 pixels
[Sat Apr  7 03:14:53 2012] 2456.280000 total counts/ 1112.070000 bgd. counts: snr = 40.308910
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.001529 pixels
  Position = (336.0, 311.4) = 8 9 47.26 -49 13 4.7
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 1344.2 +/- 49.6
  Background counts = 1112.1
  Rate = 0.01 +/- 0.0004
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:24 2012] Counts = 1344.210000, rescaling region sizes by 2.000000
[Sun Apr  8 01:33:24 2012] XMMSAS src. selection expression = ellipse(29179.520100, 27043.388000, 612.763218, 612.763218, 0.000000, X, Y)
[Sun Apr  8 01:33:24 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src9_src.reg
[Sun Apr  8 01:33:24 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (301, 276) - (371, 347)
[Sun Apr  8 01:33:24 2012] XMMSAS bgd. selection expression = annulus(29179.520100, 27043.388000, 2042.544059, 4085.088118, X, Y) && !ellipse(29394.702000, 22738.514000, 385.405611, 385.405611, 0.000000, X, Y) && !ellipse(29093.563302, 28851.813848, 405.883176, 344.055883, 0.000000, X, Y) && !ellipse(25106.472437, 22809.412563, 446.702144, 273.968208, 34.589110, X, Y) && !ellipse(25083.247000, 28028.152600, 358.964010, 358.964010, 0.000000, X, Y) && !ellipse(31214.664600, 25521.390600, 346.099210, 346.099210, 0.000000, X, Y) && !ellipse(28863.470734, 31202.232941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24918.936188, 24006.195526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25210.579600, 29837.402600, 410.876812, 410.876812, 0.000000, X, Y) && !ellipse(33086.034920, 27620.978800, 533.447215, 319.196809, 231.936000, X, Y) && !ellipse(26104.627136, 31906.447601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.994568, 23165.100830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33358.262756, 28432.386902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26307.370172, 23835.329569, 519.519740, 261.244842, 9.496879, X, Y) && !ellipse(33352.462299, 30799.449754, 435.878852, 284.686846, 236.039989, X, Y) && !ellipse(27149.693600, 31005.786400, 451.776813, 309.939209, 0.000000, X, Y) && !ellipse(25265.593960, 27158.938400, 356.424810, 356.424810, 0.000000, X, Y) && !ellipse(30805.786621, 24650.584412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.806000, 25839.083400, 1160.112033, 1160.112033, 0.000000, X, Y) && !ellipse(29415.726000, 25403.481400, 256.364807, 256.364807, 0.000000, X, Y) && !ellipse(32734.357422, 25270.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.649048, 27168.513306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25845.814880, 23642.461823, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 01:33:24 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src9.gif
[Sun Apr  8 01:34:06 2012] Mean detx,y = (4632.89, -1378.25) 
[Sun Apr  8 01:34:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:34:21 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:34:21 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Apr  8 01:34:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Apr  8 04:47:14 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:14 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Apr  8 04:47:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:16 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src9.arf
[Sun Apr  8 04:47:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:16 2012] Updating source flux to 1.5e-13