[Fri Apr  6 15:46:04 2012] Detection parameters:
  Position = (257.4, 334.7) = 8 10 22.12 -49 11 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.4 +/- 23.0
  Background counts = 112.0
  Rate = 0.002 +/- 0.0002

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 3.97'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Fri Apr  6 19:33:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.055
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 8.41"
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src61.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src61.csv
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src61.csv
[Fri Apr  6 21:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Apr  6 21:14:28 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Apr  6 21:15:05 2012] Source 81 is offset by -5.198379 and 0.034897 pixels which is larger than
2 X fitted extent = 0.952354 x 0.952354, not incorporating fit results
[Fri Apr  6 21:15:06 2012] Spatial fit model total counts = 1165.830000, observed total counts = 1105.000000
[Fri Apr  6 21:15:06 2012] Offset between fit and detection position for source 81 = 8.761939 pixels
[Fri Apr  6 21:15:06 2012] 1069.324000 total counts/ 888.004000 bgd. counts: snr = 6.084687
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 8.761939 pixels
  Position = (262.5, 341.8) = 8 10 19.87 -49 10 52.5
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 181.3 +/- 32.7
  Background counts = 888.0
  Rate = 0.002 +/- 0.0003
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 16.82"
[Sat Apr  7 01:21:29 2012] source mask rpix=3.9, npix_max = 76, mask sum = 63, frac = 0.826
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 16.82"
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src60.ximg exists
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src60_1.ximg exists
[Sat Apr  7 03:14:12 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src60 appears to have run properly
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sat Apr  7 03:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sat Apr  7 03:14:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Apr  7 03:14:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:54 2012] Warning, spatial fit 60 centroid is now closest to src. 86
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:26 2012] XMMSAS src. selection expression = ellipse(22787.446000, 29688.600000, 1009.452029, 1009.452029, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src81_src.reg
[Sun Apr  8 01:33:26 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (204, 284) - (320, 400)
[Sun Apr  8 01:33:26 2012] XMMSAS bgd. selection expression = annulus(22787.446000, 29688.600000, 1682.420048, 3364.840097, X, Y) && !ellipse(19859.855682, 32323.580263, 669.006291, 431.822375, 316.000470, X, Y) && !ellipse(20590.582000, 29838.006200, 500.425614, 500.425614, 0.000000, X, Y) && !ellipse(22136.244618, 28264.402200, 601.809617, 427.630412, 93.096080, X, Y) && !ellipse(25083.247000, 28028.152600, 358.964010, 358.964010, 0.000000, X, Y) && !ellipse(21301.715154, 30908.372020, 490.246640, 345.998767, 349.247133, X, Y) && !ellipse(21645.622253, 32989.630524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21339.632660, 32148.548000, 569.737616, 377.687211, 342.804800, X, Y) && !ellipse(19236.451365, 27819.301000, 419.451965, 309.301640, 133.757398, X, Y) && !ellipse(24283.091000, 27033.602800, 339.085610, 339.085610, 0.000000, X, Y) && !ellipse(25210.579600, 29837.402600, 410.876812, 410.876812, 0.000000, X, Y) && !ellipse(26104.627136, 31906.447601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19670.042797, 30197.877576, 351.342543, 295.231708, 336.283254, X, Y) && !ellipse(22628.486000, 31619.460000, 1461.848042, 1461.848042, 0.000000, X, Y) && !ellipse(25265.593960, 27158.938400, 356.424810, 356.424810, 0.000000, X, Y) && !ellipse(23565.135000, 31833.400600, 430.248012, 430.248012, 0.000000, X, Y) && !ellipse(25634.668365, 33201.034576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24196.806000, 25839.083400, 1160.112033, 1160.112033, 0.000000, X, Y) && !ellipse(19250.392883, 30399.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18595.026779, 33178.772156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.649048, 27168.513306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22665.477417, 25635.164856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21721.325104, 29137.814911, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src81.gif
[Sun Apr  8 01:49:28 2012] Mean detx,y = (-317.94, -6232.70) 
[Sun Apr  8 01:49:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:49:48 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:49:49 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sun Apr  8 01:49:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Sun Apr  8 04:47:15 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:15 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sun Apr  8 04:47:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:17 2012] Using photon index=1.80, rate=0.00154, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src81.arf
[Sun Apr  8 04:47:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:17 2012] Updating source flux to 2.2e-14
[Sun Apr  8 04:52:35 2012] Flag b found in src. 81 procflags, skipping spectral fitting