[Fri Apr  6 15:46:04 2012] Detection parameters:
  Position = (264.3, 401.9) = 8 10 19.03 -49 6 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.7 +/- 19.2
  Background counts = 96.2
  Rate = 0.002 +/- 0.0003

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 7.90'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Fri Apr  6 19:33:02 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 10.38"
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src79.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src79.csv
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src79_1.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src79.csv
[Fri Apr  6 21:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Fri Apr  6 21:14:28 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Fri Apr  6 21:15:05 2012] Source 61 is offset by 7.704978 and -5.738656 pixels which is larger than
2 X fitted extent = 1.201963 x 1.201963, not incorporating fit results
[Fri Apr  6 21:15:06 2012] Spatial fit model total counts = 726.772000, observed total counts = 724.000000
[Fri Apr  6 21:15:06 2012] Offset between fit and detection position for source 61 = 0.036647 pixels
[Fri Apr  6 21:15:06 2012] 725.948000 total counts/ 607.479000 bgd. counts: snr = 4.806612
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.036647 pixels
  Position = (264.3, 401.9) = 8 10 19.05 -49 6 31.1
  Extent = 7.4 (5.1-11.1)", rotation angle = 0
  Source counts = 118.5 +/- 26.9
  Background counts = 607.5
  Rate = 0.001 +/- 0.0002
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Sat Apr  7 01:21:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 7.43"
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src77.ximg exists
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Apr  7 03:14:12 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src77 appears to have run properly
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Apr  7 03:14:13 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Apr  7 03:14:54 2012] Spatial fit model total counts = 725.730000, observed total counts = 724.000000
[Sat Apr  7 03:14:54 2012] Offset between fit and detection position for source 61 = 0.070542 pixels
[Sat Apr  7 03:14:54 2012] 724.580000 total counts/ 598.573000 bgd. counts: snr = 5.150342
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.070542 pixels
  Position = (264.3, 401.8) = 8 10 19.05 -49 6 31.4
  Extent = 7.9 (4.8-11.2)", rotation angle = 0
  Source counts = 126.0 +/- 26.9
  Background counts = 598.6
  Rate = 0.001 +/- 0.0002
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:26 2012] XMMSAS src. selection expression = ellipse(22944.263800, 34910.146800, 472.984814, 472.984814, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src61_src.reg
[Sun Apr  8 01:33:26 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (237, 375) - (291, 429)
[Sun Apr  8 01:33:26 2012] XMMSAS bgd. selection expression = annulus(22944.263800, 34910.146800, 788.308023, 1576.616045, X, Y) && !ellipse(21645.622253, 32989.630524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.330643, 34486.870575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.114140, 35778.109180, 282.297608, 180.011205, 0.516000, X, Y) && !ellipse(22611.803345, 36242.017517, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src61.gif
[Sun Apr  8 01:53:02 2012] Mean detx,y = (1991.79, -11050.92) 
[Sun Apr  8 01:53:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:53:08 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:53:08 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun Apr  8 01:53:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sun Apr  8 04:47:15 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:15 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun Apr  8 04:47:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:18 2012] Using photon index=1.80, rate=0.00107, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src61.arf
[Sun Apr  8 04:47:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:18 2012] Updating source flux to 2e-14
[Sun Apr  8 04:52:35 2012] Flag b found in src. 61 procflags, skipping spectral fitting