[Fri Apr  6 15:46:03 2012] Detection parameters:
  Position = (340.8, 403.0) = 8 9 45.13 -49 6 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.8 +/- 23.3
  Background counts = 78.2
  Rate = 0.002 +/- 0.0002

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 8.18'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Fri Apr  6 19:33:02 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 10.52"
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src64.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src64.csv
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src64.csv
[Fri Apr  6 21:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri Apr  6 21:14:28 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Fri Apr  6 21:15:06 2012] Spatial fit model total counts = 903.931000, observed total counts = 905.000000
[Fri Apr  6 21:15:06 2012] Offset between fit and detection position for source 45 = 0.282462 pixels
[Fri Apr  6 21:15:06 2012] 740.904000 total counts/ 594.475000 bgd. counts: snr = 6.005654
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.282462 pixels
  Position = (340.6, 403.1) = 8 9 45.24 -49 6 25.8
  Extent = 5.3 (4.2-6.3)", rotation angle = 0
  Source counts = 146.4 +/- 27.2
  Background counts = 594.5
  Rate = 0.001 +/- 0.0002
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Sat Apr  7 01:21:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.004
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 5.35"
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src63.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src63.csv
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src63.csv
[Sat Apr  7 03:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Apr  7 03:14:13 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Apr  7 03:14:54 2012] Warning, spatial fit 63 centroid is now closest to src. 42
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:26 2012] XMMSAS src. selection expression = ellipse(29584.488600, 35022.617000, 320.773209, 320.773209, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src45_src.reg
[Sun Apr  8 01:33:26 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (322, 385) - (359, 422)
[Sun Apr  8 01:33:26 2012] XMMSAS bgd. selection expression = annulus(29584.488600, 35022.617000, 534.622015, 1069.244031, X, Y) && !ellipse(29252.002411, 33897.204498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29234.274000, 35527.198000, 371.068811, 371.068811, 0.000000, X, Y) && !ellipse(31501.956543, 36682.959473, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src45.gif
[Sun Apr  8 01:50:13 2012] Mean detx,y = (8156.51, -8553.72) 
[Sun Apr  8 01:50:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:50:18 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:50:18 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Apr  8 01:50:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun Apr  8 04:47:15 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:15 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Apr  8 04:47:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:17 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src45.arf
[Sun Apr  8 04:47:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:18 2012] Updating source flux to 3.9e-14