[Fri Apr  6 15:46:03 2012] Detection parameters:
  Position = (336.4, 410.6) = 8 9 47.09 -49 5 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.4 +/- 24.2
  Background counts = 85.5
  Rate = 0.002 +/- 0.0002

[Fri Apr  6 15:46:05 2012] Off-axis axis estimate = 8.59'
[Fri Apr  6 19:33:02 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 19:33:02 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Fri Apr  6 19:33:02 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Fri Apr  6 19:33:02 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.72"
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src55.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src55.csv
[Fri Apr  6 21:14:27 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Apr  6 21:14:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src55.csv
[Fri Apr  6 21:14:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Apr  6 21:14:28 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Apr  6 21:14:28 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Apr  6 21:15:06 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 13.358014 pixels away
[Fri Apr  6 21:15:06 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 21:15:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 21:15:06 2012] Assessing source extent using major
[Fri Apr  6 21:15:06 2012] Source does appear to be extended
[Fri Apr  6 21:15:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 01:21:29 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 01:21:29 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Sat Apr  7 01:21:29 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Sat Apr  7 01:21:29 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 10.72"
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src54.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src54.csv
[Sat Apr  7 03:14:12 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src54_1.ximg exists
[Sat Apr  7 03:14:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src54.csv
[Sat Apr  7 03:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sat Apr  7 03:14:13 2012] fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sat Apr  7 03:14:13 2012] Fit fullrun_mos2_xmm0501790101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Sat Apr  7 03:14:54 2012] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 12.695466 pixels away
[Sat Apr  7 03:14:54 2012] Spatial fit model total counts = 916.227000, observed total counts = 913.000000
[Sat Apr  7 03:14:54 2012] Offset between fit and detection position for source 42 = 1.737776 pixels
[Sat Apr  7 03:14:54 2012] Warning, changing simple spatial fit ID from 54 to 63
[Sat Apr  7 03:14:54 2012] 789.700300 total counts/ 732.500000 bgd. counts: snr = 2.113462
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.737776 pixels
  Position = (336.6, 408.9) = 8 9 47.02 -49 6 0.5
  Extent = 4.6 (3.3-6.8)", rotation angle = 0
  Source counts = 57.2 +/- 28.1
  Background counts = 732.5
  Rate = 0.0005 +/- 0.0002
[Sat Apr  7 03:14:54 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 03:14:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 03:14:54 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 03:14:54 2012] Source does appear to be extended
[Sat Apr  7 03:14:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  8 01:33:26 2012] XMMSAS src. selection expression = ellipse(29234.274000, 35527.198000, 278.301608, 278.301608, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing source region out to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src42_src.reg
[Sun Apr  8 01:33:26 2012] Extracting stamp from image fullrun_mos2_xmm0501790101_pi300-10000_cl_sm2.00.img.gz, (321, 393) - (353, 425)
[Sun Apr  8 01:33:26 2012] XMMSAS bgd. selection expression = annulus(29234.274000, 35527.198000, 463.836013, 927.672027, X, Y) && !ellipse(29252.002411, 33897.204498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29584.488600, 35022.617000, 427.697612, 427.697612, 0.000000, X, Y)
[Sun Apr  8 01:33:26 2012] Writing fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src42.gif
[Sun Apr  8 01:48:07 2012] Mean detx,y = (8056.39, -9221.25) 
[Sun Apr  8 01:48:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  8 01:48:12 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  8 01:48:12 2012] Setting source spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Apr  8 01:48:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Apr  8 04:03:04 2012] Not generating rmf since there are only 57 counts
[Sun Apr  8 04:03:04 2012] rmf not generated due to insufficient counts
[Sun Apr  8 04:47:15 2012] Updating aperture counts using extracted products
[Sun Apr  8 04:47:15 2012] Error reading totcts from fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Apr  8 04:47:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  8 04:47:17 2012] Using photon index=1.80, rate=0.000487, arf fullrun_mos2_xmm0501790101_pi300-10000_pass1_cl_src42.arf
[Sun Apr  8 04:47:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  8 04:47:17 2012] Updating source flux to 1.6e-14
[Sun Apr  8 04:52:35 2012] Source 42 has fewer than 100.000000 counts, skipping spectral fitting